Behringer DIGITAL DELAY DD600 Digital Stereo Delay/Echo Effects Pedal User Manual

Indledning

Welcome to the user manual for the Behringer DIGITAL DELAY DD600 Digital Stereo Delay/Echo Effects Pedal. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your device.

The DD600 is designed to provide a wide range of digital delay and echo effects for musical instruments, particularly electric guitars. It features 11 different delay modes and high-resolution 24-bit processing.

Vigtige sikkerhedsinstruktioner

Læs disse instruktioner.
Gem disse instruktioner.
Overhold alle advarsler.
Følg alle instruktioner.
Brug ikke dette apparat i nærheden af vand.
Rengør kun med en tør klud.
Bloker ikke ventilationsåbninger. Installer i overensstemmelse med producentens anvisninger.
Må ikke installeres i nærheden af varmekilder såsom radiatorer, varmeapparater, komfurer eller andre apparater (inklusive ampløftere), der producerer varme.
Brug kun tilbehør/tilbehør specificeret af producenten.
Overlad al service til kvalificeret servicepersonale.

Nøglefunktioner

Ultimate digital Delay/Echo effects pedal with 11 different modes.
Real Sound Modeling (RSM) technology for emulating acoustic environments.
24-bit high-resolution stereo delay/echo/panning with delay time up to 2 seconds.
Dedicated Mode, Delay Time, Feedback, and Level controls for sound shaping.
Blue status LED for effect on/off and battery check.

Kontrol og stik

Familiarize yourself with the controls and connectors on your DD600 pedal.

Behringer DD600 Digital Delay Pedal with controls labeled — This image shows the Behringer DD600 Digital Delay pedal. Key controls visible include: **NIVEAU** knob (Min/Max), **F.TILBAGE** (Feedback) knob (Min/Max), **D.TIME** (Delay Time) knob (Min/Max), and **MODE/TEMPO** knob. The pedal also features an **ON/BATT** LED indikator, IN (input) and **UD A** (output) jacks, and a **PAN OUT** jack for stereo output. The large foot switch at the bottom is labeled **BEHRINGER**.

LEVEL knap: Adjusts the output level of the delayed signal.

F.BACK (Feedback) Knob: Controls the amount of delayed signal fed back into the input, affecting the number of repeats.

D.TIME (Delay Time) Knob: Sets the duration of the delay effect, from minimum to maximum (up to 2 seconds).

MODE/TEMPO Knob: Selects between 11 different delay modes and can be used for tap tempo functionality.

ON/BATT LED: Indicates when the effect is active and serves as a battery check indicator.

I Jack: Input for your instrument cable.

OUT A Jack: Main output for the processed signal.

PAN OUT Jack: Secondary output for stereo delay effects.

Fodkontakt: Activates or deactivates the effect.

Opsætning

Strømforsyning

The DD600 can be powered by a 9V battery or an optional 9V DC power adapter (not included).

Batteri installation:

Press the two hinges on the side of the pedal to open the battery compartment.
Connect a 9V battery to the battery clip.
Place the battery inside the compartment and close the lid securely.

Ekstern strømadapter:

Connect a 9V DC, 100mA (minimum) power adapter with a center-negative plug to the DC input jack. Using an external power supply will automatically disconnect the battery.

Forbindelser

Mono-opsætning:

Tilslut dit instrument (f.eks. guitar) til IN jack of the DD600.
Tilslut UD A jack of the DD600 to your amplifers input.

Stereo opsætning:

Tilslut dit instrument til IN stik.
Forbinde UD A to the input of your first amplivligere.
Forbinde PAN OUT to the input of your second amplivligere.

Betjeningsvejledning

Grundlæggende betjening

Aktivering af effekten: Press the footswitch to toggle the effect on or off. The blue LED will illuminate when the effect is active.

Justering af forsinkelsesparametre: Brug NIVEAU, F.TILBAGE, og D.TIME knobs to fine-tune your desired delay sound.

Forsinkede tilstande

De MODE/TEMPO knob allows selection of 11 distinct delay modes:

Forsinke: Standard digital delay.
Tape: Emulates the warm, modulated sound of analog tape echo.
Bagside: Plays the delayed signal backward.
Holde: Loops a short phrase (up to 2 seconds).
Pande: Creates a stereo panning delay effect.
Modulate: Adds modulation to the delay repeats.
Ekko: Classic echo effect.
Smække: Short, single repeat delay for a "slapback" effect.
Bordtennis: Alternates delay repeats between left and right channels in stereo.
Analog: Simulates the decay characteristics of analog delays.
Port: A gated delay effect.

Tryk på Tempo-funktion

To use the tap tempo feature, hold down the footswitch for approximately 2 seconds until the LED flashes. Then, tap the footswitch two or more times at your desired tempo. The delay time will synchronize with your taps.

Note: The tap tempo function is available in most delay modes.

Opretholdelse

The Behringer DD600 requires minimal maintenance.

Rensning: Rengør pedalen med en blød, tør klud. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
Udskiftning af batteri: Replace the 9V battery when the blue LED dims or fails to illuminate, indicating low power.
Opbevaring: If storing the pedal for an extended period, remove the battery to prevent leakage. Store in a cool, dry place.

Fejlfinding

Problem	Mulig årsag	Løsning
Ingen lyd eller svag lyd.	Incorrect connections, dead battery, faulty cable, or incorrect settings.	Check all cable connections. Replace the 9V battery or use a power adapter. Test with different cables. Ensure LEVEL knob is not at minimum.
Effekten er ikke engagerende.	Footswitch not pressed, power issue.	Press the footswitch firmly. Check power supply (battery or adapter).
Uønsket støj eller brummen.	Ground loop, faulty power supply, or interference.	Use a regulated power supply. Try a different power outlet. Ensure all cables are in good condition. Isolate the pedal from other noisy equipment.
Delay time not changing.	D.TIME knob not adjusted, or in a mode that overrides manual time setting.	Rotate the D.TIME knob. Check the selected MODE. If using tap tempo, ensure it's disengaged or re-tap.

Specifikationer

Model: Behringer DD600
Effekttype: Digital Delay/Echo
Antal tilstande: 11
Forarbejdning: 24-bit high-resolution
Maks. forsinkelsestid: Op til 2 sekunder
Indgange: 1/4-inch TS (IN)
Udgange: 1/4-inch TS (OUT A, PAN OUT)
Strømforsyning: 9V DC (battery or optional power adapter)
Dimensioner (H x B x D): Cirka 2.13 x 2.76 x 4.84 tommer (54 x 70 x 123 mm)
Vægt: Cirka 0.73 lbs (0.33 kg)
Farve: Blå

Garanti og support

For detaljerede garantioplysninger og teknisk support henvises til den officielle Behringer-brochure. webwebstedet eller kontakt deres kundeservice. Behold din købskvittering som købsbevis.

Online ressourcer:

Behringer Officiel Webwebsted: www.behringer.com
Produktsupportside: (Specific link not provided, refer to main webwebsted)

	Behringer FX600 Digital Stereo Multi-Effects Pedal User Manual Comprehensive guide to the Behringer FX600 Digital Stereo Multi-Effects Pedal, covering its 24-bit stereo effects, controls, specifications, and safety instructions. Learn about Chorus, Flanger, Phaser, Delay, Tremolo, and Pitch Shifter effects.
	Behringer VINTAGE DELAY VD400 Analog Delay Effektpedal Brugermanual Omfattende brugermanual og tekniske specifikationer for Behringer VINTAGE DELAY VD400 analog delay-effektpedal. Lær om dens betjeningselementer, betjening, sikkerhedsretningslinjer, garanti og tekniske data.
	Behringer DIGITAL MULTI-FX FX600 User Manual - Digital Stereo Multi-Effects Pedal Guide This user manual provides detailed instructions, safety guidelines, and specifications for the Behringer DIGITAL MULTI-FX FX600 digital stereo multi-effects pedal. Learn about its controls, features, and proper usage.
	Behringer Chorus Symphony: Vintage Modulation Pedal Quick Start Guide Get started with your Behringer Chorus Symphony pedal. This guide covers setup, controls, safety instructions, and specifications for this vintage-style modulation effect pedal.
	Behringer COMPRESSOR/SUSTAINER CS400 Ultimate Dynamics Effects Pedal - User Manual and Specifications Comprehensive user manual and technical specifications for the Behringer COMPRESSOR/SUSTAINER CS400 dynamics effects pedal. Learn about its controls, safety guidelines, warranty, and detailed technical data.
	Behringer OD300 Overdrive/Distortion Guitar Pedal - User Manual & Specifications Comprehensive user manual and specifications for the Behringer OD300 Overdrive/Distortion guitar effects pedal. Learn about its controls, features, safety instructions, and technical specifications for achieving classic overdrive and distortion tones.

Behringer DD600

Behringer DIGITAL DELAY DD600 User Manual