Karlsson KA4548 Gummy Alarm Clock User Manual

Indledning

Welcome to the user manual for your new Karlsson KA4548 Gummy Alarm Clock. This battery-powered LCD alarm clock is designed for simplicity and functionality, featuring a unique rubberized casing that seamlessly integrates all control buttons. Its clear LCD display provides time at a glance, and the blue backlight activates only when the light button is pressed, ensuring no disruptive light emission during the night. This manual will guide you through the setup, operation, maintenance, and troubleshooting of your alarm clock.

Sikkerhedsoplysninger

• Batterisikkerhed: Always use the specified battery type (3 AAA batteries). Do not mix old and new batteries, or different types of batteries. Remove batteries if the clock will not be used for an extended period to prevent leakage. Dispose of used batteries responsibly.
• Placering: Place the alarm clock on a stable, flat surface. Avoid placing it in direct sunlight, near heat sources, or in areas with high humidity.
• Rensning: Clean the clock with a soft, dry cloth. Do not use abrasive cleaners or immerse the clock in water.
• Børn: Opbevares utilgængeligt for små børn. Dette produkt er ikke legetøj.

Produkt overview

Figure 1: Karlsson KA4548 Gummy Alarm Clock. This image displays the Karlsson KA4548 Gummy Alarm Clock from a front-facing perspective. The clock features a black rubberized casing and a clear LCD screen with a blue backlight, currently displaying the time '10:50' in large, digital segments. The top of the clock shows subtle outlines of control buttons integrated into the rubber material.

Komponenter:

• LCD-skærm: Shows time, alarm status, and other indicators.
• Rubberized Casing: Durable and provides integrated button access.
• Kontrolknapper: (Located on top/back, integrated into rubber) For setting time, alarm, snooze, and activating backlight.
• Batterirum: Located on the back, for 3 AAA batteries.

Opsætning

Batteri installation:

1. Find batterirummet på bagsiden af vækkeuret.
2. Åbn batterirummets dæksel.
3. Insert 3 new AAA batteries, ensuring correct polarity (+ and -) as indicated inside the compartment.
4. Close the battery compartment cover securely. The LCD display should now turn on.

Betjeningsvejledning

Indstilling af tid:

1. Press the 'SET' button (or equivalent, typically integrated into the rubber casing). The hour digits will start flashing.
2. Use the '+' or '-' buttons (or up/down arrows) to adjust the hour.
3. Press 'SET' again to confirm the hour and move to the minute setting. The minute digits will flash.
4. Brug knapperne '+' eller '-' til at justere minutterne.
5. Tryk på 'SET' én gang til for at bekræfte minutterne og afslutte tidsindstillingstilstanden.

Indstilling af alarm:

1. Press the 'ALARM SET' button (or similar, often labeled with an alarm icon). The alarm hour digits will start flashing.
2. Brug knapperne '+' eller '-' til at justere alarmens time.
3. Press 'ALARM SET' again to confirm the alarm hour and move to the alarm minute setting. The alarm minute digits will flash.
4. Brug knapperne '+' eller '-' til at justere alarmens minutter.
5. Press 'ALARM SET' one more time to confirm the alarm minutes and exit alarm setting mode.
6. Ensure the alarm is activated. There is usually a dedicated 'ALARM ON/OFF' switch or button. A small alarm icon should appear on the display when the alarm is active.

Snooze-funktion:

When the alarm sounds, press the 'SNOOZE' button (typically a large button on top). The alarm will temporarily stop and sound again after a few minutes (usually 5-9 minutes, depending on the model).

Baggrundslys funktion:

To illuminate the display in the dark, press the 'LIGHT' button (often integrated with the snooze button). The blue backlight will activate for a few seconds and then turn off automatically to conserve battery life. The display does not remain continuously lit.

Opretholdelse

Rensning:

Wipe the clock's surface with a soft, dry, lint-free cloth. For stubborn marks on the rubber casing, a slightly damp cloth can be used, but ensure no moisture enters the electronic components. Do not use chemical cleaners, solvents, or abrasive materials.

Udskiftning af batteri:

When the display dims or the alarm function becomes unreliable, it is time to replace the batteries. Follow the battery installation steps outlined in the 'Setup' section. Always replace all three AAA batteries at the same time with new ones.

Fejlfinding

• Skærmen er tom eller svag:
  Løsning: Kontroller batteripolariteten. Udskift med nye AAA-batterier.
• Alarmen lyder ikke:
  Løsning: Ensure the alarm is set and activated (check for alarm icon on display). Verify that the time and alarm time are correctly set. Replace batteries if they are low.
• Backlight does not work or is very dim:
  Løsning: Press the 'LIGHT' button firmly. If it still doesn't work, replace the batteries. Note that the backlight is designed to be momentary, not continuously lit.
• Knapperne reagerer ikke:
  Løsning: Ensure batteries are correctly installed and have sufficient power. Try removing and reinserting batteries to reset the device.
• Forkert tidsvisning:
  Løsning: Reset the time following the 'Setting the Time' instructions.

Specifikationer

Garanti og support

Karlsson-produkter er fremstillet efter høje kvalitetsstandarder. For information om garantidækning henvises til garantikortet, der fulgte med dit køb, eller besøg den officielle Karlsson-side. website. For technical support or further assistance, please contact Karlsson customer service through their official channels.