Chicago Pneumatic CP857 Luftvinkelsliber Brugsanvisning

1. Produktet er slutview

The Chicago Pneumatic CP857 is a heavy-duty 7-inch (180mm) air angle grinder designed for general maintenance applications. This tool offers efficient metal removal capabilities and high durability, making it suitable for various industrial tasks.

Its robust construction and ergonomic design contribute to comfortable and reliable performance in demanding environments.

2. Sikkerhedsoplysninger

ADVARSEL: Dette produkt kan udsætte dig for kemikalier, herunder bly, som i staten Californien er kendt for at forårsage kræft og fosterskader eller anden reproduktiv skade. For mere information gå til www.P65Warnings.ca.gov.

Always adhere to general safety guidelines when operating pneumatic tools. Failure to do so may result in serious injury or property damage.

• Øjenbeskyttelse: Brug altid ANSI-godkendte sikkerhedsbriller eller ansigtsskærm.
• Høreværn: Use earplugs or earmuffs to protect against noise levels.
• Håndbeskyttelse: Wear appropriate gloves to protect hands from sparks and debris.
• Åndedrætsværn: Use a respirator in dusty environments.
• Arbejdsområde: Ensure the work area is clean, well-lit, and free of obstructions. Keep bystanders away.
• Værktøjets tilstand: Inspect the tool, air hose, and grinding wheel for damage before each use. Do not operate damaged equipment.
• Lufttilførsel: Ensure the air supply is clean, dry, and at the correct pressure.
• Korrekt vagt: Always use the wheel guard provided with the tool.

3. Produktfunktioner

• Kraftfuld og effektiv: Equipped with a 1.26 HP (940 W) motor, providing high efficiency and rapid metal removal.
• Høj hastighed: Achieves a free speed of 7,500 RPM.
• Wheel Capacity: Supports a maximum wheel capacity of 7 inches (180 mm).
• Ergonomisk design: Features an aluminum alloy housing for a rugged yet lightweight construction.
• Holdbarhed: Helical bevel gearing in the angle head ensures extended tool life and smooth, low-vibration operation.
• Alsidige applikationer: Suitable for cleaning, deburring, blending, and smoothing tasks.

4. Opsætningsvejledning

4.1 Tilslutning af luftforsyning

1. Ensure your air compressor can provide the required air pressure and volume (6 CFM average air consumption, 24 CFM free speed air consumption).
2. Connect a 3/8-inch minimum diameter air hose to the tool's 3/8-inch NPTF air inlet.
3. Installer et inline-luftfilter/smøreapparat så tæt på værktøjet som muligt for at sikre ren, smurt luft.
4. Set the air pressure at the regulator to the recommended operating pressure, typically around 90 PSI (6.2 bar), or as specified for your grinding wheel.

4.2 Grinding Wheel Installation

1. Disconnect the tool from the air supply before installing or changing any accessories.
2. Ensure the grinding wheel is rated for at least 7,500 RPM and is compatible with a 7-inch diameter and 5/8-11 spindle thread.
3. Position the wheel guard correctly to deflect sparks and debris away from the operator.
4. Mount the grinding wheel onto the spindle, ensuring it is seated properly. Use the provided wrench to securely tighten the retaining nut. Do not overtighten.
5. Verify that the wheel rotates freely and is not obstructed by the guard or other components.

5. Betjeningsvejledning

5.1 Generel drift

1. Ensure all safety precautions are in place (PPE, clear work area).
2. Tilslut værktøjet til luftforsyningen.
3. Hold the grinder firmly with both hands, utilizing the removable side handle for increased maneuverability and control.
4. Start the grinder before making contact with the workpiece.
5. Apply light, even pressure to the workpiece. Allow the tool's speed and the abrasive action of the wheel to do the work. Avoid excessive force, which can damage the wheel or tool.
6. Move the grinder smoothly across the surface to achieve an even finish.
7. For tasks such as weld preparation, rust removal, deburring, and blending of steel, cast iron, and aluminum, use appropriate grinding wheels.
8. When finished, lift the grinder from the workpiece before releasing aftrækkeren.
9. Disconnect the air supply after use.

6. Vedligeholdelse

Regular maintenance ensures optimal performance and extends the lifespan of your CP857 air angle grinder.

• Smøring: If an in-line lubricator is not used, add a few drops of pneumatic tool oil into the air inlet before and after each use.
• Rensning: Keep the tool clean and free of debris. Periodically blow out the air inlet and exhaust ports with compressed air.
• Inspektion: Regularly inspect the grinding wheel for wear, cracks, or damage. Replace worn or damaged wheels immediately. Check the wheel guard for proper positioning and integrity.
• Luftslange: Inspect the air hose for cuts, kinks, or leaks. Replace damaged hoses.
• Fastgørelsesmidler: Sørg for, at alle skruer og fastgørelseselementer er spændte.

7. Fejlfinding

7.1 Fælles problemer

• Loss of Power or Slow Speed:
  • Check air pressure at the tool. Ensure it is at the recommended 90 PSI.
  • Inspect air hose for kinks, leaks, or insufficient diameter.
  • Verify the air compressor can deliver adequate CFM.
  • Check for blockages in the air inlet or exhaust.
  • Ensure proper lubrication.
• Overdreven vibration:
  • Inspect the grinding wheel for damage, imbalance, or improper installation. Replace if necessary.
  • Check for loose components on the tool.
• Luftlækager:
  • Spænd alle lufttilslutninger.
  • Inspect the air hose for damage.

If problems persist after attempting these troubleshooting steps, contact Chicago Pneumatic customer support or an authorized service center.

8. Specifikationer

9. Garantioplysninger

The Chicago Pneumatic CP857 Air Angle Grinder comes with a 2 års begrænset garanti. This warranty covers defects in materials and workmanship under normal use. For specific terms, conditions, and claim procedures, please refer to the official warranty documentation included with your product or contact Chicago Pneumatic customer service.

10. Kundesupport

For technical assistance, spare parts, or service inquiries regarding your Chicago Pneumatic CP857 Air Angle Grinder, please contact Chicago Pneumatic customer support. You can find contact information on the official Chicago Pneumatic webhjemmeside eller gennem din autoriserede forhandler.

Online ressourcer: Visit the official Chicago Pneumatic website for product manuals, FAQs, and service center locations.