Cooper-Atkins TC6-0-8

Cooper-Atkins Digital Timer / Clock / Stopwatch

Model: TC6-0-8

Indledning

This manual provides detailed instructions for the operation and maintenance of your Cooper-Atkins TC6-0-8 Digital Timer, Clock, and Stopwatch. This versatile device is designed for various timing needs, offering functionality as a timer, clock, and stopwatch within a splash-proof case.

Front view of the Cooper-Atkins TC6-0-8 Digital Timer, showing the display and six control buttons: HOUR, MIN, SEC, MEM, CLEAR, START STOP.

Figur 1: Forside view of the Cooper-Atkins TC6-0-8 Digital Timer. The display shows '0:00:00' and the buttons are clearly visible.

Nøglefunktioner

Image showing four different ways to use the Cooper-Atkins TC6-0-8 Digital Timer: with a belt clip, easel stand, wire hanger, and magnet.

Figure 2: The TC6-0-8 timer offers flexible placement with its belt clip, easel stand, wire hanger, and magnet.

Opsætning

1. Batteriinstallation

The Cooper-Atkins TC6-0-8 timer requires one AAA battery (included).

  1. Find batterirummet på bagsiden af ​​enheden.
  2. Skub batterirummets dæksel åbent.
  3. Isæt et AAA-batteri, og sørg for at polariteten (+/-) vender korrekt.
  4. Luk batterirummets dæksel forsvarligt.
Tilbage view of the Cooper-Atkins TC6-0-8 Digital Timer, showing the battery compartment, the clock/timer mode switch, and the magnet/stand.

Figur 3: Bagside view of the TC6-0-8, highlighting the battery compartment and mode switch.

2. Selecting Operating Mode (Clock/Timer)

On the back of the unit, there is a slide switch to select between Clock mode and Timer/Stopwatch mode.

Betjeningsvejledning

1. Indstilling af uret

Ensure the mode switch on the back is set to the clock icon.

  1. Tryk på TIME knappen for at indstille timen.
  2. Tryk på MIN knappen for at indstille minutter.
  3. Tryk på SEC button to set the second (usually resets to 00).
  4. The clock will start automatically.

2. Using the Timer (Countdown)

Ensure the mode switch on the back is set to the hourglass icon.

  1. Tryk på TIME knappen for at indstille de ønskede timer.
  2. Tryk på MIN knappen for at indstille de ønskede minutter.
  3. Tryk på SEC knappen for at indstille de ønskede sekunder.
  4. Trykke START/STOP for at begynde nedtællingen.
  5. For at sætte timeren på pause, tryk på START/STOP igen. Tryk én gang til for at genoptage.
  6. When the timer reaches zero, an 85-decibel alarm will sound. Press any button to silence the alarm.
  7. Tryk på for at slette timerindstillingen KLAR knap.

3. Using the Stopwatch (Count-up)

Ensure the mode switch on the back is set to the hourglass icon.

  1. Ensure the display shows '0:00:00'. If not, press KLAR.
  2. Trykke START/STOP at begynde at tælle op.
  3. Tryk på for at sætte stopuret på pause START/STOP igen. Tryk én gang til for at genoptage.
  4. For at nulstille stopuret skal du trykke på KLAR mens stopuret er stoppet.

4. Hukommelsesfunktion

The TC6-0-8 can recall the last timer setting.

  1. After a countdown timer finishes or is stopped, press the MEM button. The last set time will reappear on the display.
  2. Trykke START/STOP to restart the countdown with the recalled time.
Cooper-Atkins TC6-0-8 Digital Timer attached to the side of a coffee maker, displaying a countdown time of 0:22:57.

Figure 4: The TC6-0-8 timer in use, demonstrating its magnetic attachment and clear display during a countdown.

Opretholdelse

Fejlfinding

ProblemMulig årsagLøsning
Skærmen er tom eller svag.Lavt eller dødt batteri.Udskift AAA-batteriet. Sørg for korrekt polaritet.
Alarmen er for stille.Obstruction over the speaker, or unit defect.Ensure the speaker opening on the back is clear. If the issue persists, contact customer support.
Timer/Stopwatch not responding.Incorrect mode selected, or unit malfunction.Check the mode switch on the back. Ensure it is set to the hourglass icon for timer/stopwatch functions. If still unresponsive, try replacing the battery.
Cannot set time/timer.Forkert tilstand valgt.Verify the mode switch on the back is set to the appropriate icon (clock for clock setting, hourglass for timer setting).

Specifikationer

Image showing the dimensions of the Cooper-Atkins TC6-0-8 Digital Timer, with measurements of 2.38 inches height, 1.12 inches width, and 2.75 inches depth.

Figure 5: Product dimensions of the TC6-0-8 timer.

Garantioplysninger

For specific warranty details regarding your Cooper-Atkins TC6-0-8 Digital Timer, please refer to the warranty card included with your purchase or visit the official Cooper-Atkins webGarantidækningen dækker typisk fabrikationsfejl under normal brug.

Kundesupport

If you encounter any issues or have questions not covered in this manual, please contact Cooper-Atkins customer support.

Relaterede dokumenter - TC6-0-8

Preview Cooper-Atkins produktkatalog: Temperatur- og fugtighedsmåling, timere og overvågningsløsninger
Udforsk det omfattende Cooper-Atkins produktkatalog, der indeholder avancerede temperatur- og fugtighedstermometre, pålidelige timere og innovative overvågningsløsninger. Opdag produkter til fødevareindustrien, sundhedsvæsenet og industrien, herunder TempTrak, NotifEye og HACCP Manager-systemer.
Preview Cooper-Atkins 20200 multifunktionstermometer instruktioner
Instruktioner til Cooper-Atkins 20200 multifunktionstermometeret, med detaljerede oplysninger om dets funktioner, betjening og specifikationer, herunder Bluetooth-forbindelse og temperaturmålingsmuligheder.
Preview HACCP Manager hurtigstartguide
Lynstartvejledning til Cooper-Atkins HACCP Manager håndholdte instrument, med detaljerede oplysninger om softwareinstallation, programstart, datasynkronisering, upload, strømstyring og opladningsinstruktioner.
Preview Cooper-Atkins DFP450W digitalt lommetermometer
Cooper-Atkins DFP450W er et digitalt lommetermometer designet til at måle opvaskemaskiners slutskylningstemperaturer. Det har et bredt temperaturområde, høj nøjagtighed, hukommelse til maksimal temperatur og automatisk slukning. Apparatet er NSF-certificeret og ideelt til fødevareindustrien og tilbyder et sikkert alternativ til kviksølvtermometre.
Preview Instruktioner til firmwareopdatering af Cooper-Atkins multifunktionstermometer
Trinvise instruktioner til opdatering af firmwaren på Cooper-Atkins multifunktionstermometer (MFT) ved hjælp af Blue2 Reader-appen. Indeholder oplysninger om download af appen, tilslutning af MFT'en og verifikation af opdateringen.
Preview Cooper-Atkins SysCal 93025 kalibreringssystem: Brugervejledning og garanti
Omfattende brugervejledning og garantioplysninger til Cooper-Atkins SysCal 93025 kalibreringssystemet, med detaljerede betjeningsvejledninger, kalibreringsprocedurer, fejlfinding og systemspecifikationer.