Westek SW103CTC-4 Drejelig Monterings Lysstyring Brugermanual

Indledning

The Westek SW103CTC-4 Swivel Mount Light Control is designed to automate outdoor lighting by sensing ambient light levels. This device automatically turns lights on at dusk and off at dawn, providing convenience and energy efficiency. It features an aimable sensor and is compatible with various bulb types, including LED, incandescent, fluorescent, mercury vapor, and sodium bulbs.

Nøglefunktioner

• Automatic Nightlight Control: Ideal for hallways, laundry rooms, garages, basements, attics, and outdoor spaces.
• Dusk-to-Dawn Activation: Automatically activates lights in low light conditions and deactivates them at dawn.
• Alsidig kompatibilitet: Works with LED, incandescent, fluorescent, mercury vapor, and sodium bulbs.
• Swivel Sensor: Allows for optimal positioning of the photocell light sensor.
• Vejrbestandigt hus: Designed for outdoor use in various conditions.
• Nem installation: Connects directly to an electrical box with a standard 1/2-inch pipe thread and 6-inch pre-stripped leads.

Produkt overview

The Westek SW103CTC-4 is a compact photoelectric switch designed for outdoor lighting control. It consists of a sensor unit with a swivel mount and wiring leads for electrical connection.

Figur 1: Westek SW103CTC-4 Swivel Mount Light Control. This image shows the light control unit with its wiring leads (red, black, white) and the swivel base for mounting. The photocell sensor is visible at the top.

Figur 2: Labeled components of the Westek SW103CTC-4. This diagram highlights the photocell light sensor, the swivel adjustment for optimal light positioning, and the weather-proof housing. It also indicates compatibility with LED, incandescent, fluorescent, and halogen bulb sockets.

Opsætning og installation

ADVARSEL: Installation should be performed by a qualified electrician or a person with knowledge of electrical wiring. Ensure power is disconnected at the circuit breaker before beginning installation to prevent electrical shock.

1. Strømafbrydelse: Turn off the power to the circuit at the main electrical panel before starting any work.
2. Monteringssted: Select a mounting location that allows the photocell sensor to receive natural light without obstruction from artificial light sources (e.g., the light it controls, streetlights) at night. The swivel feature allows for aiming the sensor away from such interference.
3. Forbered el-boks: The unit connects directly to an electrical box using a standard 1/2-inch pipe thread. Ensure the electrical box is properly installed and secured.
4. Ledningsforbindelser:
   • Tilslut sort ledning from the light control to the incoming hot (line) wire fra strømkilden.
   • Tilslut rød ledning from the light control to the hot (load) wire af lysarmaturet.
   • Tilslut hvid ledning from the light control to the neutral ledning from the power source and the light fixture.
   • Secure all connections with appropriate wire nuts.
5. Sikr enheden: Thread the light control unit into the electrical box opening and secure it with the provided nut.
6. Adjust Sensor Position: Utilize the swivel feature to aim the photocell sensor towards an area that receives natural light and is not affected by the controlled light fixture or other artificial light at night.
7. Gendan strøm: Once all connections are secure and the unit is mounted, restore power at the circuit breaker.

Betjeningsvejledning

The Westek SW103CTC-4 operates automatically based on ambient light levels. No manual intervention is typically required after installation.

• Dusk Activation: As natural light diminishes at dusk, the photocell sensor will detect the reduced light level and automatically turn on the connected light fixture.
• Dawn Deactivation: As natural light increases at dawn, the photocell sensor will detect the increased light level and automatically turn off the connected light fixture.
• Indledende forsinkelse: Ved første opstart eller efter et strømafbrydelsetage, the unit may have a brief delay (a few minutes) before it begins normal operation. This is a standard function to prevent false triggers.

Opretholdelse

The Westek SW103CTC-4 requires minimal maintenance.

• Sensorrensning: Periodically inspect the photocell sensor for dirt, dust, or debris accumulation. Gently wipe the sensor lens with a soft, clean cloth to ensure accurate light detection.
• Miljøfaktorer: Ensure that no new obstructions (e.g., growing foliage, new structures) block natural light from reaching the sensor or that new artificial light sources interfere with its operation.
• Ledningsintegritet: Occasionally check the wiring connections for any signs of wear or corrosion, especially in harsh outdoor environments.

Fejlfinding

Specifikationer

Garanti og support

The product includes a warranty. For specific warranty details and customer support, please refer to the documentation included with your purchase or visit the official Westek website. Contact information for support is typically available on the manufacturer's product packaging or webwebsted.