Behringer Digital Delay DD400

Indledning

The Behringer DD400 is a versatile digital delay and echo effects pedal designed for guitarists and other musicians. It offers a wide range of delay effects, from subtle echoes to long, atmospheric repeats, enhancing your sound with depth and dimension. This manual provides essential information for setting up, operating, and maintaining your DD400 pedal.

Understanding Delay

Delay is an audio effect that creates an echo by repeating a sound after a short period. Each repeated sound typically becomes quieter than the previous one, gradually fading out. The Behringer DD400 allows you to control various parameters of this echo, including the delay time, the number of repeats (feedback), and the mix level of the effect.

Nøglefunktioner

• 7 Digital Delay/Echo Modes: Offers a variety of delay types for diverse soundscapes.
• 24-bit High-Resolution Stereo Delay: Provides clear and detailed audio processing.
• Up to 1.3 Seconds Delay Time: Allows for long, expansive echoes.
• Tap Tempo Feature: Synchronize delay time with your music by tapping the footswitch.
• Dedikerede kontroller: Independent knobs for Mode, Time, Feedback, and Level for precise sound shaping.
• HOLD-tilstand: Enables looping of short riffs for creative layering.
• Fleksible strømmuligheder: Operates on a 9V battery or optional BEHRINGER PSU-SB DC power supply.
• Blue Status LED: Indicates effect status and battery check.
• High Signal Integrity: First-class electronic On/Off switch ensures minimal signal degradation in bypass mode.

Produkt overview

Billede: Forside view of the Behringer DD400 Digital Delay pedal, showing the control knobs and footswitch.

Styringer og forbindelser

• LEVEL knap: Justerer lydstyrken på det forsinkede signal.
• FEEDBACK-knap: Controls the number of repeats. Higher settings result in more echoes.
• TIME knap: Sets the delay time, from short slap-back echoes to long, ambient delays.
• MODE knap: Selects one of the 7 delay modes, including various delay time ranges and the HOLD mode.
• I Jack: Input for your instrument cable.
• OUT A Jack: Main output for the processed signal.
• DIR OUT Jack: Direct output for the unprocessed signal, useful for stereo setups.
• ON/BATT LED: Illuminates when the effect is active and indicates battery status.
• Fodkontakt: Engages/disengages the effect and activates Tap Tempo/HOLD mode.
• 9V DC indgang: For connecting an optional power adapter.

Opsætning

1. Strømforsyning:
   • Batteri: Open the battery compartment on the underside of the pedal and insert a 9V battery. The ON/BATT LED will dim when the battery is low.
   • AC-adapter: Connect an optional BEHRINGER PSU-SB DC power supply (not included) to the 9V DC input jack.
2. Forbindelser:
   • Tilslut dit instrument (f.eks. guitar) til IN stik ved hjælp af et standard 6,5 mm instrumentkabel.
   • Tilslut UD A stik til din amplifter eller den næste pedal i din signalkæde.
   • For stereo operation, connect the DIR UD jack til et sekund ampforsyning eller input.
3. Indledende indstillinger: Before powering on, set the LEVEL, FEEDBACK, and TIME knobs to their minimum positions to avoid sudden loud sounds.

Operation

Grundlæggende forsinkelsesfunktion

1. Press the footswitch to engage the effect. The blue ON/BATT LED will illuminate.
2. Drej på MODE knob to select your desired delay type. The modes offer different delay time ranges (e.g., S 200ms, S 500ms, S 1300ms, M 200ms, M 500ms, M 1300ms) and the HOLD mode.
3. Juster TID knob to set the duration of the delay.
4. Brug FEEDBACK knob to control the number of repeats. Lower settings produce fewer repeats, while higher settings create a longer, decaying echo.
5. Juster NIVEAU knob to blend the delayed signal with your dry signal.
6. Press the footswitch again to bypass the effect.

Tap Tempo Feature

The Tap Tempo feature allows you to set the delay time by tapping the footswitch in rhythm with your music.

1. Sørg for, at pedalen er aktiveret (LED lyser).
2. Hold down the footswitch for approximately 2 seconds until the LED flashes rapidly. This indicates Tap Tempo mode is active.
3. Tap the footswitch two or more times at your desired tempo. The delay time will automatically synchronize with your taps.
4. To exit Tap Tempo mode, simply stop tapping. The pedal will revert to normal operation with the newly set delay time.

HOLD tilstand

The HOLD mode allows you to record a short audio phrase and loop it continuously, enabling you to play over the looped sound.

1. Vælg HOLDE position on the MODE knob.
2. Press and hold the footswitch. The LED will illuminate.
3. Play the riff or phrase you wish to loop. The maximum recording time is approximately 1.3 seconds.
4. Release the footswitch to end recording. The recorded phrase will now loop continuously.
5. You can play your instrument over the looping phrase.
6. To stop the loop, press the footswitch again.

Opretholdelse

• Rensning: Brug en blød, tør klud til at rengøre pedalen. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
• Udskiftning af batteri: If using battery power, replace the 9V battery when the ON/BATT LED dims or the effect performance degrades. Always remove the battery if the pedal will not be used for an extended period to prevent leakage.
• Opbevaring: Opbevar pedalen et køligt, tørt sted væk fra direkte sollys og ekstreme temperaturer.
• Kabelpleje: Sørg for, at alle kabler er i god stand og korrekt tilsluttet for at forhindre signaltab eller støj.

Fejlfinding

Specifikationer

Garanti og support

For warranty information and technical support, please refer to the official Behringer webwebstedet eller kontakt din lokale Behringer-distributør. Gem din købskvittering som købsbevis i tilfælde af garantikrav.

Online ressourcer: Visit the official Behringer webwebsted for produktregistrering, ofte stillede spørgsmål og yderligere supportressourcer.