AMS F5848

AMS Radio-Controlled Wall Clock 5848

Model: F5848

1. Introduktion

Thank you for choosing the AMS Radio-Controlled Wall Clock Model F5848. This modern silver wall clock is designed for precision timekeeping, automatically synchronizing with a radio time signal. Its elegant design, featuring a mineral glass and a large display, makes it a perfect addition to any room, especially a study. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your clock.

AMS Radio-Controlled Wall Clock 5848, front view

Figur 1.1: Front view of the AMS Radio-Controlled Wall Clock 5848. This image shows the round silver and white clock face with black hour, minute, and second hands. The numbers 1 through 12 are clearly visible, with the AMS logo and a radio signal icon below the 12 o'clock position. The outer ring is silver-toned, and the inner face is white.

2. Sikkerhedsoplysninger

Please read all safety instructions carefully before using the clock. Keep this manual for future reference.

  • Batterisikkerhed:
    • Use only the specified type and size of battery.
    • Insert batteries with correct polarity (+ and -). Incorrect insertion may cause damage.
    • Bland ikke gamle og nye batterier eller forskellige typer batterier.
    • Fjern brugte batterier med det samme for at forhindre lækage og skader.
    • If the clock is not used for a long period, remove the batteries to prevent leakage.
    • Opbevar batterier utilgængeligt for børn.
  • Generelle forholdsregler:
    • Udsæt ikke uret for ekstreme temperaturer, direkte sollys eller høj luftfugtighed.
    • Undgå kraftige vibrationer eller stød.
    • Do not disassemble or modify the clock. This will void the warranty.
    • Clean the clock only with a soft, dry cloth. Do not use abrasive cleaners or solvents.

3. Pakkens indhold

Kontroller venligst pakkens indhold ved åbning. Hvis der mangler eller er beskadigede dele, skal du kontakte din forhandler.

  • AMS Radio-Controlled Wall Clock (Model F5848)
  • Brugervejledning (dette dokument)
  • (Battery may or may not be included depending on retailer/region)

4. Opsætning

4.1. Batteriinstallation

  1. Find batterirummet på bagsiden af ​​uret.
  2. Åbn batterirummets dæksel.
  3. Insert one AA (or specified type) battery, ensuring the correct polarity (+ and -) as indicated inside the compartment.
  4. Luk batterirummets dæksel forsvarligt.

4.2. Indledende tidssynkronisering (radiostyret)

Your AMS clock is radio-controlled and will automatically set itself to the correct time once batteries are installed and a signal is received. This process may take a few minutes to several hours depending on your location and signal strength.

  1. After inserting the battery, the clock hands will typically move to the 12 o'clock position and then stop. This indicates it is searching for the radio signal.
  2. Place the clock in an area with good radio signal reception. Avoid placing it near large metal objects, electronic devices, or in basements, which can interfere with the signal. A window-facing wall is often ideal.
  3. Once the signal is received, the clock will automatically adjust to the correct time. This usually happens within a few minutes, but can take longer.
  4. If the clock does not set itself after 24 hours, try relocating it to a different position or refer to the Troubleshooting section.

4.3. Montering af uret

Uret er designet til vægmontering.

  1. Choose a suitable location on a wall, ensuring it is sturdy enough to hold the clock's weight (approx. 1.6 kg).
  2. Use an appropriate wall anchor and screw (not included) for your wall type.
  3. Hæng uret sikkert op ved hjælp af ophængningshullet på bagsiden.

5. Betjening

5.1. Tidsvisning

The AMS Radio-Controlled Wall Clock displays time using traditional hour, minute, and second hands. The large display ensures easy readability from a distance.

5.2. Modtagelse af radiosignaler

The clock continuously monitors the radio time signal to maintain accurate time. In areas with poor reception, the clock may occasionally lose synchronization. It will attempt to re-synchronize automatically. If the signal is consistently weak, you may need to relocate the clock.

5.3. Manual Time Setting (If Applicable)

Most radio-controlled clocks do not have a manual time setting function, as they rely solely on the radio signal. If your clock has a small button or dial on the back (often labeled "M.SET" or similar), it may allow for manual adjustment in areas without signal. Refer to the specific markings on your clock's movement if automatic synchronization fails persistently.

6. Vedligeholdelse

6.1. Rensning

To clean the clock, gently wipe the surface with a soft, dry, lint-free cloth. Do not use liquid cleaners, sprays, or abrasive materials, as these can damage the finish or the mineral glass.

6.2. Udskiftning af batteri

When the clock hands stop moving or the time becomes inaccurate, it is likely time to replace the battery. Follow the battery installation steps in Section 4.1. Always replace with a fresh, high-quality battery of the specified type.

6.3. Opbevaring

If you plan to store the clock for an extended period, remove the battery to prevent potential leakage and damage to the movement.

7. Fejlfinding

ProblemMulig årsagLøsning
Clock hands do not move or stop.Dead or low battery. Incorrect battery polarity.Replace battery with a fresh one, ensuring correct polarity.
Clock shows incorrect time or fails to synchronize.Poor radio signal reception. Interference from other electronics.Relocate the clock to an area with better signal (e.g., near a window, away from electronics). Allow up to 24 hours for synchronization.
Clock loses time or gains time intermittently.Weak battery. Intermittent signal loss.Replace battery. Check for consistent signal reception.
Hands are misaligned (e.g., not pointing to 12 after reset).Internal mechanism issue or strong magnetic interference.Remove battery for 1 minute, then reinsert. Allow clock to re-synchronize. If problem persists, contact support.

8. Specifikationer

FeatureDetalje
MærkeAMS
ModelnummerF5848
FarveSølv
Produktmål (L x B x H)31 x 4 x 213 cm (Note: 213cm height seems incorrect for a wall clock, likely a data entry error. Assuming 31x31cm for a round clock based on feature bullets and image.)
Actual Product Dimensions (Diameter x Depth): 31 x 4 cm (approx.)
MaterialeGlass (Mineral Glass), Aluminum (Brushed Aluminum finish on ring)
Varens vægt1.6 kilo
Display TypeAnalog
StilModerne
Speciel funktionLarge display, Radio-controlled
StrømkildeBatteridrevet
VærelsestypeStudy Room (Suggested)
FormRund

Bemærk: Produktspecifikationerne kan ændres uden varsel.

9. Garanti og support

9.1. Garantioplysninger

Specific warranty terms and conditions for the AMS Radio-Controlled Wall Clock Model F5848 are provided by the manufacturer, AMS. Please refer to any warranty card included with your product or visit the official AMS webwebstedet for detaljerede garantioplysninger. Gem din købsbevis til garantikrav.

9.2. Kundesupport

For teknisk assistance, fejlfinding ud over denne manual eller garantiforespørgsler, kontakt venligst:

  • Your retailer where the product was purchased.
  • The official AMS customer support channels (refer to the AMS webhjemmeside for kontaktoplysninger).

When contacting support, please have your model number (F5848) and purchase date ready.

Relaterede dokumenter - F5848

Preview AMS 5898 / 5893 Radio-Controlled Clock User Manual
Detailed instructions for setting up and operating the AMS 5898 and AMS 5893 radio-controlled clocks, including time setting, alarm functions, temperature display, and maintenance.
Preview AMS vægur brugsanvisning
Betjeningsvejledning til AMS vægure, der dækker installation, udskiftning og generel brug af batterier på flere sprog.
Preview ams AS5600L Adapterkort Eval Kit Manual
Denne manual indeholder omfattende oplysninger om ams AS5600L-WL_EK_AB adapterkortet, herunder sættets indhold, kortbeskrivelse, monteringsvejledning, pinout-detaljer, I2C-tilstandsdrift, hardwarediagrammer, printkortlayout og bestillingsoplysninger.
Preview ams AS5048 14-bit roterende positionssensor brugermanual
Denne brugermanual indeholder detaljerede oplysninger om ams AS5048, en 14-bit roterende positionssensor med digital vinkel og PWM-udgang. Den dækker AS5048-adapterkortet, montering, pinout, driftstilfælde (SPI, Daisy Chain), firmwarekodning, f.eks.amples og hardwarediagrammer. Essentielt for ingeniører, der integrerer denne sensor i deres systemer.
Preview ams AS5048 Adapter Board Evaluation Kit Manual
This manual details the ams AS5048 Adapter Board (AS5048-EK-AB), an evaluation kit for the AS5048 magnetic position sensor. It covers hardware, operation modes (SPI, I2C), software examples, and contact information for ams AG.
Preview AMS ur brugsanvisning og batteriudskiftningsvejledning
Instruktioner til betjening og udskiftning af batteri i AMS-ure, med flersproget vejledning.