Sealey SA721 Luftsliber Ø75mm Mini Orbital Komposit Premier - Brugsanvisning

1. Introduktion

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Sealey SA721 Air Sander. Please read this manual thoroughly before using the tool to ensure proper handling and to prevent injury or damage.

The Sealey SA721 is a compact and powerful mini orbital air sander designed for precision sanding tasks, particularly in smaller areas or for spot refinishing. Its composite lightweight housing enhances user comfort and reduces the effects of chill.

2. Sikkerhedsinstruktioner

WARNING: Always observe general safety precautions when using power tools. Failure to do so may result in serious injury.

• Personligt beskyttelsesudstyr (PPE): Always wear eye protection (safety glasses/goggles), hearing protection, and a dust mask when operating the sander. Gloves are recommended.
• Arbejdsområde: Sørg for, at dit arbejdsområde er rent, godt oplyst og fri for rod. Hold børn og tilskuere væk.
• Lufttilførsel:
  • Ensure the air compressor is capable of providing the required operating pressure (90psi) and air consumption (3cfm).
  • Use clean, dry, regulated air. Moisture in the air line can damage the tool.
  • Afbryd altid lufttilførslen, før du skifter tilbehør, udfører vedligeholdelse eller når værktøjet ikke er i brug.
  • Overskrid ikke det maksimale driftstryk.
• Værktøjshåndtering:
  • Bær aldrig værktøjet i luftslangen.
  • Ensure the tool is switched off before connecting to the air supply.
  • Undgå utilsigtet start.
  • Tving ikke værktøjet; lad værktøjet gøre arbejdet.
• Vibration: Prolonged use may cause vibration-related injuries. Take regular breaks and use anti-vibration gloves if necessary.
• Støv: Sanding generates dust. Use appropriate dust extraction methods and work in a well-ventilated area.

3. Produktfunktioner

The Sealey SA721 Air Sander is engineered with several key features for optimal performance and user comfort:

• Composite Lightweight Housing: Designed to reduce the effects of chill on the operator's hands during extended use, contributing to comfort and control.
• Justerbar hastighedskontrol: Located on the side of the motor housing, allowing the user to regulate the sanding speed for different applications and materials.
• High-Quality Air Motor: Equipped with quality bearings for smooth, powerful, and reliable operation.
• Kompakt design: Ideal for sanding smaller areas, making it perfect for smart repairs or spot refinishing tasks where precision is required.
• Hook-and-Loop Pad: Supplied with a Ø75mm hook-and-loop pad, enabling quick and easy attachment and removal of sanding discs.

This image displays the Sealey SA721 Air Sander from a side angle, highlighting its compact design and the attached Ø75mm hook-and-loop sanding pad. The composite housing and red trigger are clearly visible.

This image provides another perspective of the Sealey SA721 Air Sander, focusing on the rear section where the air inlet is located. It also shows the textured grip for improved handling.

4. Opsætning

1. Forbered lufttilførsel:
   • Sørg for, at din luftkompressor er slukket, og at trykket er taget af.
   • Connect an air hose (minimum 3/8" I.D.) to your compressor.
   • Install an in-line air filter/regulator/lubricator unit (FRL) as close to the tool as possible. This is crucial for tool longevity and performance.
   • Set the air pressure regulator to 90psi (6.2 bar) when the tool is running.
2. Connect Air Sander:
   • Apply thread sealant tape to the 1/4" BSP air inlet thread on the sander.
   • Screw the air hose quick connector (not supplied) onto the sander's air inlet.
   • Connect the air hose to the sander.
3. Attach Sanding Disc:
   • Sørg for, at lufttilførslen er afbrudt.
   • Select a Ø75mm hook-and-loop sanding disc appropriate for your application.
   • Align the disc with the hook-and-loop pad on the sander and press firmly to secure it.

5. Betjeningsvejledning

1. Kontrol før operation:
   • Bekræft, at alle forbindelser er sikre.
   • Ensure the sanding disc is properly attached.
   • Confirm the air pressure is set correctly.
2. Start af slibemaskinen:
   • Hold slibemaskinen godt fast med begge hænder.
   • Press the trigger to start the motor. The speed can be adjusted using the speed control dial on the side of the motor housing.
3. Slibeteknik:
   • Apply light, even pressure to the workpiece. Do not press too hard, as this can reduce efficiency and damage the tool or workpiece.
   • Move the sander in overlapping circular or elliptical patterns for uniform material removal.
   • For best results, keep the sanding pad flat against the surface.
   • Regularly check the sanding disc for wear and replace as needed.
4. Stop af slibemaskinen:
   • Slip aftrækkeren for at stoppe motoren.
   • Always disconnect the air supply when finished or when leaving the tool unattended.

6. Vedligeholdelse

Regular maintenance is crucial for the longevity and optimal performance of your Sealey SA721 Air Sander.

• Daglig vedligeholdelse:
  • Before each use, add a few drops of good quality air tool oil into the air inlet. This lubricates the internal components.
  • Empty the water trap on your air compressor and FRL unit daily to prevent moisture from entering the tool.
  • Inspect the air hose for wear or damage.
• Rensning:
  • After each use, clean the exterior of the sander with a dry cloth.
  • Remove any dust or debris from the sanding pad and around the motor housing.
  • Do not use solvents or harsh chemicals, as they may damage the composite housing.
• Opbevaring:
  • Store the sander in a clean, dry, and secure location, away from direct sunlight and extreme temperatures.
  • Disconnect from air supply before storage.
• Service: Overlad al service til kvalificeret servicepersonale.

7. Fejlfinding

8. Specifikationer

9. Garanti og support

For warranty information, technical support, or spare parts, please contact Sealey customer service or visit the official Sealey webwebsted. Gem din købsbevis i tilfælde af garantikrav.

Sealeys kontaktoplysninger: Please refer to the contact details provided with your product packaging or on the official Sealey webwebstedet for de mest opdaterede supportoplysninger.