Produkt overview
The RAB C100W is a durable, weatherproof round cover designed for electrical installations. It features a single hole and is finished in white, ensuring protection against outdoor elements.
Image: The RAB C100W Weatherproof Cover, a round, white cover with a central hole and mounting points.
Nøglefunktioner:
- Die-cast aluminum construction for durability.
- Color-matched finish for aesthetic integration.
- Gasketed design with an 1/8 inch thick closed-cell silicone rubber weatherseal gasket for superior weather protection.
- Strong corrosion-proof polycarbonate components.
- Compliant with Buy American Act and Recovery Act.
Opsætning og installation
This section provides general guidelines for installing the RAB C100W weatherproof cover. Always consult local electrical codes and a qualified electrician for specific installation requirements.
- Sikkerhed først: Before beginning any electrical work, ensure the power supply to the circuit is turned off at the circuit breaker or fuse box. Verify with a voltage tester.
- Forbered overfladen: Ensure the mounting surface is clean, dry, and flat.
- Placer dækslet: Align the C100W cover with the electrical box or fixture it is intended to protect. The central hole should align with the conduit or cable entry point.
- Sikker montering: Use appropriate screws (not included) to securely fasten the cover to the electrical box or mounting surface through the designated mounting holes. Ensure a tight fit to maintain the weatherproof seal.
- Placering af pakning: Ensure the 1/8 inch thick closed-cell silicone rubber weatherseal gasket is properly seated between the cover and the mounting surface to create a watertight seal.
- Cable/Conduit Connection: Route the electrical cable or conduit through the central opening. Ensure all connections are made according to electrical standards and local codes.
- Endelig kontrol: Double-check all connections and ensure the cover is firmly secured before restoring power.
Betjeningsvejledning
The RAB C100W is a passive weatherproof cover and does not have operational controls. Its function is to provide protection for electrical connections and components from environmental factors.
- Once installed, the cover continuously protects the enclosed electrical components from moisture, dust, and other outdoor elements.
- Ensure the cover remains securely fastened to maintain its weatherproof integrity.
Opretholdelse
Regular maintenance helps ensure the longevity and effectiveness of the RAB C100W weatherproof cover.
- Periodisk eftersyn: Annually inspect the cover for any signs of damage, cracks, or loose fasteners. Check the integrity of the gasket.
- Rensning: Clean the exterior of the cover with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the finish or material.
- Pakningskontrol: If the gasket appears brittle, cracked, or damaged, it should be replaced to maintain the weatherproof seal.
- Fastgørelsesfasthed: Periodically check and tighten any loose mounting screws to ensure the cover remains securely attached.
Fejlfinding
This section addresses common issues related to the RAB C100W weatherproof cover.
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Water ingress/leaks | Damaged or improperly seated gasket; Loose mounting screws; Improper sealing around conduit/cable entry. | Ensure gasket is correctly positioned and undamaged. Tighten all mounting screws. Apply appropriate sealant around cable/conduit entry points if necessary. Replace gasket if damaged. |
| Cover feels loose | Monteringsskruerne er løse eller afrevne. | Tighten mounting screws. If screws are stripped, use larger screws or appropriate anchors. |
| Corrosion on cover surface | Exposure to harsh chemicals or extreme environmental conditions. | Clean the surface with a mild, non-abrasive cleaner. While the cover is corrosion-proof, extreme conditions can affect surface appearance. |
Specifikationer
| Attribut | Detalje |
|---|---|
| Modelnummer | C100W |
| Mærke | RAB belysning |
| Materiale | Die-cast Aluminum (cover), Polycarbonate (components), Silicone Rubber (gasket) |
| Form | Rund |
| Farve/finish | Hvid |
| Varens vægt | 3.2 ounce |
| Voltage Bedømmelse | 120 volt |
| Wattage Bedømmelse | 100 watt |
| Pakningstype | 1/8 inch thick closed-cell silicone rubber |
| UPC | 019813934075 |
| Første ledige dato | 23. august 2007 |
Garantioplysninger
The RAB C100W Weatherproof Cover is covered by a manufacturer's warranty. For specific details regarding warranty terms, conditions, and duration, please refer to the official documentation provided with your purchase or contact RAB Lighting directly.
Note: Warranty coverage typically applies to defects in materials and workmanship under normal use and service. Damage resulting from improper installation, misuse, abuse, or unauthorized modifications may not be covered.
Kundesupport
For technical assistance, product inquiries, or warranty claims, please contact RAB Lighting customer support.
- Fabrikant: RAB belysning
- Webwebsted: www.rablighting.com (Besøg venligst den officielle webhjemmeside for de seneste kontaktoplysninger.)
- Generelle forespørgsler: Refer to the contact section on the RAB Lighting webwebsted.
