Theben Timer 26 (Model 0260030) Analog Programmerbar Stikkontakt Brugsanvisning

1. Introduktion

Thank you for choosing the Theben Timer 26 analog programmable socket. This device is designed to automatically switch electrical appliances on and off at pre-set times, offering convenience and energy management for your home or office. This manual provides essential information for the correct installation, operation, and maintenance of your timer.

The Theben Timer 26 features a daily program with 96 switching segments, allowing for precise 15-minute intervals. It is built with high-temperature resistant, self-extinguishing thermoplastics for durability and safety.

Billede 1.1: Forside view of the Theben Timer 26, displaying the central Schuko socket and the surrounding blue and white dial with time markings and programmable segments.

2. Vigtige sikkerhedsinstruktioner

Please read all safety instructions carefully before use. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Elektrisk kompatibilitet: Denne timer er designet til Schuko type sockets (Type F) with a recessed ground contact. It is ikke kompatibel with sockets that use a protruding earth pin (e.g., Type E common in France, Belgium, and Poland) unless an appropriate, certified adapter is used. Verify your wall socket type before plugging in the timer.
• Kun indendørs brug: This device is intended for indoor use in dry locations only. Do not expose to rain, moisture, or extreme temperatures outside the specified operating range (-40°C to 55°C).
• Voltage og indlæs: Ensure the connected appliance's voltage and current draw do not exceed the timer's maximum ratings (230V AC, 16A). Overloading can cause overheating and fire.
• Må ikke skilles ad: Do not attempt to open or modify the timer. There are no user-serviceable parts inside. Unauthorized modifications will void the warranty and may pose a safety hazard.
• Børn og kæledyr: Keep the timer out of reach of children and pets.
• Træk stikket ud før rengøring: Always unplug the timer from the wall socket before cleaning.

3. Produktkomponenter

Familiarize yourself with the main parts of your Theben Timer 26:

1. Time Dial: The large rotating ring with 24-hour markings (0-24).
2. Programmable Segments: The blue tabs around the time dial. Each tab represents 15 minutes. Pushing a tab inwards activates the power during that 15-minute interval.
3. Indikator for aktuel tid: A small arrow or mark on the stationary part of the timer, indicating the current time on the rotating dial.
4. Manuel tilsidesættelseskontakt: A small switch, typically on the side or top, allowing you to manually turn the connected appliance ON or OFF, overriding the programmed schedule until the next scheduled change.
5. Schuko-stikkontakt: The central socket where you plug in your appliance.
6. Schuko-stik: The plug on the back of the timer that connects to your wall socket.

Billede 3.1: Side view of the timer, highlighting the Schuko plug for wall connection and the manual override switch.

4. Opsætningsvejledning

Follow these steps to set up your Theben Timer 26:

1. Pak timeren ud: Tag forsigtigt timeren ud af emballagen.
2. Tjek socket-kompatibilitet: Ensure your wall socket is a compatible Schuko type (Type F). If unsure, consult a qualified electrician.
3. Indstil aktuel tid: Rotate the entire time dial clockwise until the current time aligns with the stationary current time indicator. For example, if it's 3 PM, align '15' with the indicator.
4. Sæt i stikkontakten: Insert the timer's Schuko plug firmly into a suitable wall socket.
5. Tilslut apparat: Plug the appliance you wish to control into the Schuko socket on the front of the timer. Ensure the appliance is switched ON if it has its own power switch.

Image 4.1: The timer correctly installed in a wall socket, ready for an appliance to be plugged in.

5. Betjeningsvejledning

5.1. Programming the Daily Schedule

The Theben Timer 26 operates on a 24-hour cycle. Each blue segment around the dial represents a 15-minute interval. To program your desired ON/OFF times:

1. Identify ON/OFF Periods: Determine the specific times you want your appliance to be powered ON or OFF.
2. Push Segments Inwards for ON: For each 15-minute interval you want the appliance to be ON, push the corresponding blue segment inwards towards the center of the dial.
3. Leave Segments Outwards for OFF: For each 15-minute interval you want the appliance to be OFF, leave the corresponding blue segment in its outward position.

The timer will automatically cycle through the 24-hour program, switching the connected appliance according to the pushed-in segments.

Image 5.1: A user's hand demonstrating how to push the blue segments to program the timer.

5.2. Manuel tilsidesættelse

The timer includes a manual override switch, typically located on the side or top. This switch allows you to temporarily bypass the programmed schedule.

• Position 'I' (ON): The appliance will remain continuously ON, regardless of the programmed segments.
• Position '0' (OFF): The appliance will remain continuously OFF, regardless of the programmed segments.
• Timer Symbol Position: The timer will operate according to the programmed schedule.

Moving the switch to 'I' or '0' will override the program until you manually switch it back to the timer symbol position, or until the next scheduled ON/OFF event, depending on the specific model's design. For the Theben Timer 26, the manual override typically holds its position until manually changed back.

Image 5.2: Detail of the manual override switch, indicating its positions for continuous ON, OFF, or timed operation.

6. Vedligeholdelse

The Theben Timer 26 requires minimal maintenance.

• Rensning: Disconnect the timer from the wall socket before cleaning. Wipe the exterior with a soft, dry cloth. Do not use liquid cleaners, abrasive materials, or solvents, as these can damage the device.
• Opbevaring: Hvis timeren opbevares i længere tid, skal den sørges for at være ren og tør. Opbevares køligt og tørt, beskyttet mod direkte sollys.

7. Fejlfinding

If you encounter issues with your Theben Timer 26, refer to the following common problems and solutions:

• Apparatet tænder/slukker ikke på programmerede tidspunkter:
  • Check Manual Override: Ensure the manual override switch is set to the timer symbol position, not 'I' (ON) or '0' (OFF).
  • Verify Segments: Confirm that the correct blue segments are pushed inwards for the desired ON times and outwards for OFF times.
  • Aktuel tidsindstilling: Ensure the time dial is set to the correct current time.
  • Apparatets strøm: Check if the connected appliance is switched ON (if it has its own power switch) and functioning correctly when plugged directly into a wall socket.
• Timer is not receiving power:
  • Wall Socket: Check if the wall socket is live by plugging in another appliance.
  • Timer Plug: Ensure the timer's plug is fully inserted into the wall socket.
• Timer is making unusual noises:
  • A faint ticking sound is normal for analog timers. If the noise is loud, grinding, or unusual, discontinue use and contact support.

If these steps do not resolve the issue, please contact Theben customer support.

8. Tekniske specifikationer

Image 8.1: A visual representation of the technical specifications for the Theben Timer 26.

9. Garanti og support

Theben products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the official Theben webwebstedet eller kontakt din lokale forhandler. Gem din købskvittering som købsbevis.

Image 9.1: The Theben Timer 26, highlighting its durability and potential long-term guarantee.