Indledning
This user manual provides comprehensive instructions for the Sigma Analog Chest Strap, designed for use with compatible Sigma heart rate monitors such as the Allround I and Allround II series. Please read this manual carefully before using the product to ensure proper operation, maximize performance, and maintain product longevity.
Sikkerhedsoplysninger
- Do not attempt to open or modify the chest strap or its components. This may void the warranty and cause damage.
- Opbevar enheden utilgængeligt for små børn.
- If you experience skin irritation, discontinue use and consult a physician.
- Bortskaf batterier ansvarligt i henhold til lokale regler.
- Denne enhed er ikke medicinsk udstyr og bør ikke anvendes til diagnostiske eller behandlingsmæssige formål.
Produkt overview
The Sigma Analog Chest Strap consists of a flexible elastic strap and a sensor module that detects heart rate signals. The strap is adjustable to fit various chest sizes, and the sensor module is designed for comfortable wear during physical activity.
Figur 1: Overview of the Sigma Analog Chest Strap. The image displays the black elastic chest strap with an adjustable buckle and the integrated sensor module, which features the "SIGMA GERMANY" logo.
Opsætning
1. Batteriinstallation (hvis relevant)
The chest strap comes with a pre-installed CR2 battery. If replacement is needed, refer to the Maintenance section.
2. Preparing the Electrodes
Before wearing, moisten the two electrode areas on the back of the chest strap (the ribbed sections) with water or electrode gel. This ensures good contact with your skin for accurate heart rate detection.
3. Sådan bærer du brystremmen
- Adjust the elastic strap to a comfortable fit around your chest, just below your pectoral muscles.
- Ensure the sensor module is centered on your chest, with the Sigma logo facing outwards.
- The moistened electrodes should be in firm contact with your skin.
Drift
1. Pairing with Your Heart Rate Monitor
The Sigma Analog Chest Strap is designed to work with compatible analog heart rate monitors. Typically, no manual pairing is required as the analog signal is continuously broadcast. Simply ensure your heart rate monitor is turned on and within range.
2. Start din træning
Once the chest strap is correctly worn and the electrodes are moistened, your heart rate monitor should automatically detect the signal. Begin your activity as usual. Your heart rate will be displayed on your compatible device.
3. Ending Your Workout
After your workout, remove the chest strap. It is recommended to clean the strap immediately after use (see Maintenance section).
Opretholdelse
Rensning
- After each use, rinse the chest strap under running water to remove sweat and salt residue.
- Wipe the sensor module with a damp klæde. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
- Allow the strap to air dry completely before storing. Do not machine wash or tumble dry.
Udskiftning af batteri
The chest strap uses a CR2 battery. When the battery is low, your heart rate monitor may display an indicator or show erratic readings. To replace the battery:
- Åbn forsigtigt batterirummet på bagsiden af sensormodulet med en lille mønt eller et passende værktøj.
- Fjern det gamle batteri.
- Indsæt et nyt CR2-batteri med den positive (+) side opad.
- Luk batterirummet forsvarligt, og sørg for, at forseglingen sidder korrekt for at opretholde vandtætheden.
Opbevaring
Store the chest strap in a cool, dry place away from direct sunlight and extreme temperatures.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Ingen pulsmåling | Dry electrodes, poor contact, low battery, out of range, incompatible device. | Moisten electrodes, adjust strap position, replace battery, move closer to monitor, ensure monitor is analog compatible. |
| Uregelmæssige eller fluktuerende aflæsninger | Insufficient moisture, interference from other electronic devices, loose strap, low battery. | Re-moisten electrodes, move away from interference sources, tighten strap, replace battery. |
| Hudirritation | Allergic reaction, strap too tight, poor hygiene. | Loosen strap, clean strap thoroughly after each use, discontinue use if irritation persists and consult a doctor. |
Specifikationer
| Feature | Detalje |
|---|---|
| Modelnummer | 20303 |
| Mærke | Sigma |
| Farve | Sort |
| Materiale Type | Materiale |
| Kompatible enheder | Computer (Analog Heart Rate Monitors) |
| Batteritype | 1 CR2 batteri (medfølger) |
| Varens vægt | 70 gram |
| Produktdimensioner | 30 x 30 x 30 cm (packaging/approximate) |
| GTIN | 04016224203031 |
Garanti og support
For information regarding warranty coverage and technical support, please refer to the documentation provided with your original purchase or visit the official Sigma webwebsted. Specifikke garantivilkår kan variere afhængigt af region og forhandler.
Note: This manual does not contain specific contact information for support. Please consult the manufacturer's official channels for the most up-to-date support details.
