1. Introduktion
This manual provides detailed instructions for the installation, operation, and maintenance of your Lutron Maestro MSCLV-600M-SW Magnetic Low Voltage Digital Dimmer. This dimmer is designed for use with 600-watt magnetic low voltage lighting applications and supports multi-location dimming from up to ten locations when paired with coordinating Maestro Accessory Dimmers.
Nøglefunktioner omfatter:
- Multi-location dimming capability (up to nine accessory dimmers).
- One tap on/off to selected light level.
- Two taps for full brightness.
- Press and hold for a 10-second fade to off.
- Delayed off feature provides light as you exit the room.
- Rocker switch for precise light level adjustment.
2. Vigtige sikkerhedsoplysninger
ADVARSEL: Risiko for elektrisk stød.
- Turn off power at the circuit breaker or fuse box before installing or servicing the dimmer.
- Installation must be performed by a qualified electrician or trained personnel in accordance with all local and national electrical codes.
- Do not use with standard incandescent, LED, or electronic low voltage lighting. This dimmer is specifically for magnetic low voltage indlæser.
- Sørg for det samlede wattage of the connected lighting does not exceed the dimmer's maximum rating of 600 watts.
- Ground the dimmer in accordance with local and national electrical codes.
3. Pakkens indhold
Your Lutron Maestro MSCLV-600M-SW package should include:
- One (1) Lutron Maestro MSCLV-600M-SW Digital Dimmer
- Installationsvejledning (dette dokument)
- Monteringsskruer
Note: Wall plates and coordinating accessory dimmers (for multi-location control) are sold separately.
4. Installationsvejledning
Before beginning, ensure power is turned off at the circuit breaker. This dimmer is designed for single-pole or multi-location applications. For multi-location control, you will need one Maestro MSCLV-600M-SW dimmer and up to nine Maestro Accessory Dimmers.
4.1 Wiring Diagram (Typical Single-Pole Installation)
Refer to the diagram below for a typical single-pole wiring configuration. For multi-location wiring, consult the specific instructions provided with your Maestro Accessory Dimmers.
Billedbeskrivelse: This image displays the Lutron Maestro MSCLV-600M-SW dimmer module from the front, showing its internal components and wiring terminals. Labels indicate 'POWER', 'TURN OFF', 'UP', 'ON', 'OFF', and '800W MAX' (note: product is 600W, this label might be generic for the series). The dimmer has a main rocker switch and a smaller vertical slider for dimming control, along with a row of indicator lights. The metal mounting straps are visible with regulatory markings.
- Sluk for strømmen: Locate the circuit breaker that controls the lighting circuit and switch it to the OFF position. Verify power is off at the switch location using a voltage tester.
- Fjern eksisterende switch: Fjern forsigtigt vægpladen, og skru den eksisterende afbryder af vægdåsen. Frakobl ledningerne fra den gamle afbryder.
- Identificér ledninger: Identify the following wires in the wall box:
- Hot/Line Wire: The wire bringing power from the circuit breaker.
- Indlæs ledning: The wire going to the light fixture.
- Jordledning: Bar kobberledning eller grøn isoleret ledning.
- Neutral ledning: (If present, typically white) This dimmer does not require a neutral wire.
- Wire the Dimmer: Connect the wires from the wall box to the dimmer's terminals as follows:
- Tilslut Hot/Line wire to the dimmer's designated line terminal (usually black).
- Tilslut Indlæs wire to the dimmer's designated load terminal (usually red).
- Tilslut Jord wire to the dimmer's green ground screw.
- For multi-location installations, connect the traveler wires according to the accessory dimmer instructions.
- Monter lysdæmperen: Fold forsigtigt ledningerne ind i vægdåsen, og fastgør lysdæmperen til vægdåsen med de medfølgende skruer.
- Installer vægplade: Attach the coordinating wall plate (sold separately) over the dimmer.
- Gendan strøm: Tænd for strømmen igen ved afbryderen.
5. Betjeningsvejledning
The Lutron Maestro Digital Dimmer offers intuitive control over your magnetic low voltage belysning.
Billedbeskrivelse: This image shows the Lutron Maestro MSCLV-600M-SW dimmer installed with a white faceplate. The main rocker switch and the smaller vertical slider are clearly visible, along with the row of five small LED indicator lights on the left side, with one light illuminated in yellow, indicating the current dimming level.
5.1 Grundlæggende betjening
- Tænd/sluk: Tap the main rocker switch once to turn the lights on to your previously selected level, or off.
- Fuld lysstyrke: Tap the main rocker switch twice quickly to turn the lights on to full brightness.
- Dæmp/lys op: Use the small vertical rocker switch on the right side to adjust the light level up or down. The LED indicator lights on the left will show the current brightness level.
- Delayed Off: Press and hold the main rocker switch for approximately 10 seconds. The lights will gradually fade to off, providing time to exit the room before the lights extinguish completely.
6. Vedligeholdelse
Your Lutron Maestro dimmer is designed for long-lasting performance with minimal maintenance.
- Rensning: For at rengøre lysdæmperen og vægpladen skal du tørre af med en blød klud.amp klud. Brug ikke slibende rengøringsmidler, opløsningsmidler eller kemiske spray, da disse kan beskadige overfladen eller de indvendige komponenter.
- Ingen dele, der kan serviceres af brugeren: There are no user-serviceable parts inside the dimmer. Do not attempt to open or repair the unit.
7. Fejlfinding
If your Lutron Maestro dimmer is not functioning as expected, consult the following common issues and solutions:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Lysene tænder ikke. | Strømmen er afbrudt ved afbryderen. Løs ledningsforbindelse. Bulb(s) burned out. | Check the circuit breaker and turn it ON. Kontroller, at alle ledningsforbindelser er sikre (sørg først for, at strømmen er slukket). Udskift pære(r). |
| Lights do not dim or flicker. | Incorrect bulb type (not magnetic low voltagog). I alt wattage exceeds dimmer capacity. Løse ledninger. | Ensure you are using magnetic low voltage bulbs/fixtures. Reducer det samlede watttage of connected lights to below 600W. Kontrollér ledningsforbindelserne (sørg først for, at strømmen er slukket). |
| Dimmer is warm to the touch. | Normal drift. | It is normal for dimmers to feel warm during operation. If it is excessively hot or emits smoke/odor, turn off power immediately and contact support. |
| Multi-location control not working. | Incorrect wiring for multi-location. Accessory dimmer not compatible or faulty. | Review multi-location wiring diagrams for the Maestro system. Ensure you are using genuine Lutron Maestro Accessory Dimmers. |
If the problem persists after trying these solutions, please contact Lutron Customer Support.
8. Specifikationer
| Feature | Detalje |
|---|---|
| Modelnummer | MSCLV-600M-SW |
| Mærke | Lutron |
| Wattage | 600 Watts (Magnetic Low Voltage) |
| Operation Voltage | 120 Volt AC, 60 Hz |
| Driftstilstand | Slukket |
| Kontroltype | Touch with Dimmer Control |
| Aktuator type | Tryk knap |
| Kredsløbstype | 9-way (for multi-location with accessory dimmers) |
| Farve | Sne |
| Dimensioner (L x B x H) | 1.5 x 2.2 x 4.2 tommer |
| Varens vægt | 4 ounce |
| Forbindelsesprotokol | X-10 |
| Særlige funktioner | Deep Back Cover |
9. Garantioplysninger
Specific warranty details for the Lutron Maestro MSCLV-600M-SW dimmer are typically provided with the product packaging or can be found on the official Lutron website. Lutron generally offers a limited warranty covering defects in materials and workmanship. Please retain your proof of purchase for warranty claims.
10. Kundesupport
For additional assistance, technical support, or troubleshooting not covered in this manual, please contact Lutron Customer Support.
10.1 Lutron 24/7 Support Video
Videobeskrivelse: This video highlights Lutron's commitment to customer support, emphasizing that help is available 24/7. It shows a person installing a Lutron product and then a customer service representative assisting a customer, conveying the ease of getting projects done with Lutron's continuous support.
Lutron 24/7 Support Phone: 844-588-7661
You can also visit the official Lutron website for more resources, FAQs, and product information.
