Polaris KIT-SKAG 7/16x4" Carbide 60° CMP Skiløber Brugsanvisning

1. Produktet er slutview

The Polaris KIT-SKAG 7/16x4" Carbide 60° CMP Ski Runner, Part 2871688, is an engineered service part designed to deliver optimal performance and precise fit for your Polaris snowmobile. This component is crucial for steering and control, especially on varied snow and ice conditions.

Using Polaris Engineered parts ensures compatibility and durability, contributing to the longevity and reliable operation of your vehicle.

Billede 1: The Polaris KIT-SKAG 7/16x4" Carbide 60° CMP Ski Runner, Model 2871688, shown in its original packaging. The packaging displays the product name, brand, and key specifications.

2. Hvad er inkluderet

Your Polaris KIT-SKAG package typically includes:

• One (1) Ski Carbide Runner

Note: Additional mounting hardware may be included or sold separately depending on the specific kit. Please verify contents upon receipt.

3. Kompatibilitet

This accessory is designed to fit various Polaris snowmobile models. It is intended for schematic location 12. Compatible models include, but are not limited to:

• 2007 600 HO IQ
• 2005 INDY 500
• 2005 900 FUSION
• 2004-2006 500 XC SP
• 2004-2005 800 XC SP
• 2004-2005 700 XC SP
• 2004-2005 600 XC SP
• 2004 POLARIS 500 INDY
• 2004 800 PRO XR
• 2004 800 PRO X 2
• 2004 700 RMK 151
• 2004 700 PRO X 2
• 2004 600 PRO X 2
• 2004 550 PRO X
• 2003 800 PRO X
• 2003 700 PRO X
• 2002-2004 600 PRO X
• 2002-2003 440 PRO X FAN
• 2002 500 XC
• 1999 700 RMK/2.0
• 1999 600 RMK/2.0
• 1998-1999 700 RMK/1.75
• 1998-1999 600 RMK
• 1997-1999 TRAIL RMK
• 1997-1999 500 RMK
• 1997 XLT SKS
• 1997 XLT RMK
• 1997 XLT
• 1997 STORM SE
• 1997 STORM RMK
• 1997 STORM
• 1997 700 SKS
• 1997 700 RMK 1.75
• 1997 500 SKS
• 1997 500

Always consult your snowmobile's specific service manual for exact part numbers and compatibility before installation.

4. Sikkerhedsoplysninger

Before beginning any installation or maintenance, please observe the following safety precautions:

• Brug altid passende personlige værnemidler, herunder sikkerhedsbriller og handsker.
• Ensure the snowmobile is on a stable, level surface and properly secured to prevent accidental movement.
• Turn off the engine and remove the ignition key before working on the snowmobile.
• Refer to your snowmobile's owner's manual for specific safety guidelines and procedures.
• If you are unsure about any step, consult a qualified Polaris service technician.

5. Opsætning og installation

Installing the ski runner requires basic mechanical knowledge and tools. Follow these general steps:

1. Prepare the Snowmobile: Lift the front of the snowmobile using a suitable jack or stand to allow access to the skis. Ensure it is stable and secure.
2. Remove Old Ski Runner: Locate the existing ski runner. Remove the nuts and bolts securing it to the ski. Carefully slide the old runner out of the ski channel.
3. Clean Ski Channel: Inspect the ski channel for any debris, rust, or damage. Clean thoroughly to ensure a proper fit for the new runner.
4. Install New Ski Runner: Align the new Polaris KIT-SKAG ski runner with the holes in the ski. Slide it into the channel. Ensure the carbide is facing the correct direction (typically forward).
5. Sikker hardware: Insert the new bolts (if provided) or reuse existing ones through the ski and runner. Secure with the appropriate nuts. Tighten all hardware to the manufacturer's specified torque settings. Do not overtighten.
6. Inspicere: Verify that the new ski runner is securely mounted and does not have excessive play. Lower the snowmobile carefully.

Billede 2: En detaljeret view of the carbide runner, highlighting the 'Woody's' branding and the robust construction of the carbide wear bar. This shows the critical contact surface with the snow and ice.

Billede 3: A close-up of the mounting hardware, specifically the nuts, which are used to secure the ski runner to the snowmobile ski. Proper tightening of these components is essential for safe operation.

6. Betjeningsvejledning

Once installed, the ski runner operates as an integral part of your snowmobile's steering system. No specific operational steps are required beyond normal snowmobile operation. However, be aware that new ski runners may alter steering feel slightly until they are broken in. Always operate your snowmobile responsibly and according to local regulations.

7. Vedligeholdelse

Regular inspection and maintenance of your ski runners are essential for safety and performance:

• Visuel inspektion: Before each ride, check the ski runners for excessive wear, bends, cracks, or missing carbide segments.
• Hardwarekontrol: Periodically inspect all mounting hardware for tightness. Loose hardware can lead to poor steering and potential damage.
• Rensning: After riding, clean any accumulated snow, ice, or debris from the ski runners and channels.
• Udskiftning: Replace ski runners when the carbide wear bar is significantly worn down or damaged. Worn runners compromise steering control and safety.

8. Fejlfinding

If you experience issues related to your ski runners, consider the following:

• Poor Steering/Darting: Check for uneven wear on ski runners, loose mounting hardware, or incorrect alignment. Ensure both ski runners are identical and installed correctly.
• Overdreven slid: This can be caused by riding on abrasive surfaces (asphalt, gravel) or improper ski alignment. Avoid non-snow surfaces when possible.
• Støj/Vibrationer: Inspect for loose hardware, damaged runners, or foreign objects lodged in the ski channel.

For persistent issues, consult your Polaris dealer or a certified service technician.

9. Specifikationer

10. Garanti og support

For information regarding warranty coverage, technical support, or to locate an authorized service center, please visit the official Polaris website or contact your local Polaris dealer. Genuine Polaris Engineered parts are designed to meet strict quality standards.

Du kan også besøge Polaris Store on Amazon for flere produkter og information.