Indledning
This instruction manual provides essential information for the safe and efficient operation of your TPI Corporation 198TMC Fan Forced Portable Heater. The 198TMC is a versatile heating unit featuring both fan-forced and radiant heating elements, designed to warm small rooms and work areas. Please read this manual thoroughly before initial use and retain it for future reference.
Billede: Forside view of the TPI Corporation 198TMC Fan Forced Portable Heater, showcasing its white metal casing and protective grille.
Vigtige sikkerhedsoplysninger
Failure to follow these safety instructions may result in fire, electric shock, injury, or property damage. Always exercise caution when operating electrical appliances.
- Læs alle instruktioner: Before using this heater, read all instructions carefully.
- Korrekt placering: Place the heater on a firm, level surface. Do not place it on soft surfaces like beds or rugs where openings may be blocked.
- Klarering: Maintain a minimum distance of 3 feet (0.9 meters) from combustible materials such as furniture, pillows, bedding, papers, clothes, and curtains.
- Dæk ikke til: Never cover the heater or block its air inlets or outlets. This can lead to overheating and fire.
- Tag stikket ud, når det ikke er i brug: Tag altid stikket ud af varmeapparatet, når det ikke er i brug.
- Overvågning: Nøje opsyn er nødvendigt, når en varmeovn bruges af eller i nærheden af børn eller personer med nedsatte fysiske, sensoriske eller mentale evner.
- Elektrisk tilslutning: Ensure the heater is connected to a properly grounded 120V electrical outlet. Do not use with extension cords unless absolutely necessary and ensure the cord is rated for the heater's wattage.
- Overophedningsbeskyttelse: This heater is equipped with a manual reset switch for overheat protection. If the heater overheats, it will automatically shut off. Allow it to cool, then press the reset button on the back.
- Vip-omskifter: The unit includes a tip-over switch that disables the heater if it is accidentally knocked over, enhancing safety.
- Våde steder: Brug ikke varmelegemet i badeværelser, vaskerum eller lignende indendørs steder, hvor det kan komme i kontakt med vand.
Opsætning
- Udpakning: Carefully remove the heater from its packaging. Retain packaging materials for storage or in case of return.
- Inspektion: Undersøg varmeapparatet for tegn på skader. Brug det ikke, hvis det er beskadiget.
- Placering: Position the heater on a stable, flat surface in the desired area. Ensure it is at least 3 feet away from walls, furniture, and other objects. The 198TMC is suitable for warming small spaces such as garages, workshops, warehouses, laundry rooms, and bedrooms.
- Strømtilslutning: Plug the heater's 6-foot, three-conductor power cord into a standard 120V grounded electrical outlet. Ensure the outlet is in good condition and not overloaded.
Betjeningsvejledning
The TPI 198TMC heater offers multiple heat settings and a thermostat for precise temperature control.
Billede: En detaljeret view of the heater's control panel, showing the power/mode selector and thermostat dial.
- Valg af strøm/tilstand: Locate the control knob on the front panel. Turn the knob to select your desired heating mode:
- OFF: Slukker for varmelegemet.
- LOW (600W Radiant): Activates the radiant heating element only, providing gentle, direct heat.
- MED (900W Fan Forced): Activates the fan-forced heating element, circulating warm air.
- HIGH (1500W Radiant & Fan Forced): Activates both radiant and fan-forced elements for maximum heat output.
- Termostatjustering: Use the thermostat dial to set the desired room temperature. Turn the dial clockwise for a higher temperature setting and counter-clockwise for a lower setting. The heater will cycle on and off to maintain the set temperature.
- Indledende drift: When first turned on, a slight odor may be present. This is normal and will dissipate after a few minutes of operation.
Opretholdelse
Regular maintenance ensures optimal performance and longevity of your heater. Always unplug the heater and allow it to cool completely before performing any maintenance.
- Rensning:
- Tør de udvendige overflader af med adamp klæde.
- Do not use harsh chemical-based cleaners, abrasive pads, or scouring powders, as these can damage the finish.
- Remove loose dust from the grilles and interior components using a feather duster or a vacuum cleaner with a brush attachment.
- Opbevaring: Hvis varmeapparatet opbevares i længere tid, skal det rengøres grundigt og opbevares køligt og tørt, helst i originalemballagen.
Fejlfinding
Hvis din varmelegeme ikke fungerer korrekt, kan du se følgende tabel for almindelige problemer og løsninger.
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Varmeapparatet tænder ikke. | No power, power switch off, thermostat set too low, or tip-over switch activated. | Check power cord connection. Ensure power switch is on. Increase thermostat setting. Check if heater was tipped over and reset. |
| Varmeapparatet slukker uventet. | Overheat protection activated or tip-over switch activated. | Unplug the heater, allow it to cool for 10-15 minutes. Press the manual reset button on the back of the unit. Ensure proper ventilation and clear any obstructions. If tipped, place upright. |
| Utilstrækkelig varmeafgivelse. | Incorrect power setting, thermostat set too low, or room size too large. | Select a higher power setting (MED or HIGH). Increase the thermostat setting. Ensure the heater is appropriate for the room size (up to 150 sq. ft.). |
Billede: Bagside view of the TPI Corporation 198TMC heater, highlighting the location of the manual reset button for overheat protection.
Specifikationer
- Model: 198TMC
- Varemodelnummer: GIDDS-1633290
- Strømindstillinger: 600W (Radiant), 900W (Fan Forced), 1500W (Radiant & Fan Forced)
- Voltage: 120V
- Ampalder: 12.5/7.5/5 Amps (at 1 Phase)
- Maksimal BTU: 5,120
- Opvarmningsområde: Heats up to 150 sq. ft.
- Ledningslængde: 6 feet, 3-conductor
- Dimensioner (H x B x D): Cirka 15 x 11 x 12 tommer
- Vægt: Cirka 8.81 pund
- Sikkerhedsfunktioner: Manual reset overheat protection, Tip-over switch
- Certificeringer: UL compliant for use in the United States and Canada
Image: A diagram illustrating the approximate height (15"), width (11"), and depth (12"), of the TPI Corporation 198TMC heater.
Garanti og support
For warranty information, technical assistance, or to inquire about replacement parts, please contact TPI Corporation directly. Refer to the product packaging or the official TPI Corporation webwebstedet for de seneste kontaktoplysninger og supportressourcer.
