3Dconnexion SpaceExplorer 3DX-700026 3D-navigationsenhed brugermanual

Indledning

The 3Dconnexion SpaceExplorer is a 3D navigation device designed to enhance interaction with 3D applications. It allows for simultaneous panning, zooming, and rotating of 3D objects and environments through its controller cap. This manual provides instructions for setting up, operating, and maintaining your SpaceExplorer device.

Billede: Top view of the 3Dconnexion SpaceExplorer 3D Navigation Device, showing the controller cap, programmable buttons, and attached USB cable.

Opsætning og installation

1. Hardwareforbindelse

1. Sørg for, at din computer er tændt.
2. Connect the USB cable from the SpaceExplorer device to an available USB port on your computer.
3. The device will be recognized by your operating system.

2. Installation af driver og software

For full functionality and customization, install the 3Dconnexion software. This software includes drivers and the Configuration Wizard.

1. Visit the official 3Dconnexion webwebsted (www.3dconnexion.com/support/drivers/) to download the latest drivers and software for your operating system.
2. Kør det downloadede installationsprogram, og følg instruktionerne på skærmen.
3. The software automatically detects installed 3D applications and applies default configurations.
4. Utilize the Configuration Wizard for an interactive guide on controller cap movement and preference settings.
5. The Update Wizard ensures your 3DxSoftware remains current with the latest OS and application versions.

Operating the SpaceExplorer

Controller Cap Navigation

The core of the SpaceExplorer's functionality is its controller cap. Apply gentle pressure to the cap to manipulate 3D models and environments:

• Skub træk: Zoomer ind og ud.
• Vip: Pans the view op, ned, venstre eller højre.
• Vride: Rotates the object or scene around its axis.

These movements can be combined for fluid, simultaneous control over all six degrees of freedom (pan, zoom, rotate).

Programmerbare funktionstaster

The SpaceExplorer features an array of easy-to-reach function keys. These keys are pre-programmed with commands from leading design applications and automatically map as you switch between applications.

• Numbered Buttons (1, 2): Customizable for your favorite application commands.
• Speed Key: Adjusts navigation sensitivity.
• Views nøgle: Accesses standard views (e.g., top, front, isometric).
• 2D Only Key: Restricts navigation to 2D movement.
• Fit Key: Instantly positions the model or scene to fit the screen.
• Control Panel Key: Opens the 3Dconnexion control panel for settings adjustments.
• Keyboard Modifiers (ESC, CTRL, ALT, SHIFT): Provides no-look access to common keyboard functions.

Using the SpaceExplorer in conjunction with a standard mouse allows for a two-handed workflow, where one hand navigates the 3D environment and the other performs selections or edits.

Nøglefunktioner

• Intuitive 3D navigation for precise control.
• Six degrees of freedom via a controller cap designed to flex in all directions.
• 15 pre-configured and programmable keys for enhanced workflow.
• Broad application support for 3D software including Autodesk, SolidWorks, Dassault Systemes, PTC, UGS, and Google applications.
• Ergonomic design with a soft, sculpted palm rest to reduce fatigue during extended use.
• Automatic function mapping on keys as you change applications.
• Instant positioning of models and scenes with Fit and View nøgler.

Opretholdelse

To ensure the longevity and optimal performance of your 3Dconnexion SpaceExplorer, follow these maintenance guidelines:

• Rensning: Use a soft, dry, lint-free cloth to clean the device. For stubborn dirt, slightly dampRengør kluden med vand. Undgå skrappe kemikalier eller slibende rengøringsmidler.
• Opbevaring: Opbevar enheden et rent, tørt sted væk fra ekstreme temperaturer og direkte sollys.
• Kabelpleje: Avoid kinking or sharply bending the USB cable. Do not pull the device by its cable.

Billede: Underside view of the 3Dconnexion SpaceExplorer, displaying the product label with model information and anti-slip rubber feet.

Fejlfinding

If you encounter issues with your SpaceExplorer, try the following steps:

• Enheden reagerer ikke:
  • Sørg for, at USB-kablet er korrekt tilsluttet til både enheden og computeren.
  • Prøv at tilslutte enheden til en anden USB-port.
  • Genstart din computer.
  • Geninstallation af driver: Uninstall and then reinstall the 3Dconnexion drivers from the official webwebsted.
• Application Specific Issues:
  • Verify that the 3D application you are using is officially supported by 3Dconnexion.
  • Check the 3Dconnexion control panel for application-specific settings and ensure they are configured correctly.
  • Ensure the 3Dconnexion software is up-to-date using the Update Wizard.
• Intermittent Functionality / Device Dead:
  • Perform a hard reset: Disconnect the USB cable. While holding down the '1' and '2' buttons on the device, reconnect the USB cable. Release the buttons once the device is recognized.
• Knapper virker ikke:
  • Ensure the correct application profile is active in the 3Dconnexion control panel.
  • Customize button assignments in the control panel if default settings are not desired.

For further assistance, refer to the 3Dconnexion support webwebsted eller kontakt deres kundeservice.

Specifikationer

Garanti og support

Juridisk ansvarsfraskrivelse

This product is provided as-is. If purchased outside of its original packaging, it is fully functional with no operational defects. All sales are final; no returns are accepted for such purchases.

Kundesupport

For technical support, driver updates, or additional product information, please visit the official 3Dconnexion support webwebsted: www.3dconnexion.com/support/.