Behringer MiniAmp AMP800 4-channel Headphone Amplivligere brugervejledning

Model: AMP800

Indledning

The Behringer MiniAmp AMP800 is a versatile 4-channel headphone amplifier designed to provide high-quality audio distribution for multiple users. It allows up to eight sets of headphones to be connected simultaneously, offering individual control over volume and input source for each channel. This compact and lightweight device is ideal for studio monitoring, live sound applications, or any scenario requiring multiple headphone outputs with independent control.

Nøglefunktioner

Four independent stereo high-power amplifier sektioner.
Two stereo main inputs for flexible routing.
Individual output level control for each channel.
Balance control for each channel to mix between input sources.
Parallel link output for cascading multiple AMP800 enheder.
High-quality components and rugged construction for durability.

Opsætning

Before connecting your Behringer MiniAmp AMP800, ensure all audio equipment is powered off to prevent potential damage. Refer to the diagrams below for proper connection procedures.

Front view of the Behringer MiniAmp AMP800 showing four headphone outputs, input level controls, and balance knobs.

Figure 1: Front panel of the Behringer MiniAmp AMP800, illustrating the four headphone output channels, each with dedicated level and balance controls, and input A/B selection buttons. The main power button and clip indicators are also visible.

Side view of the Behringer MiniAmp AMP800, highlighting its compact size and the rubberized feet on the bottom for stability.

Figur 2: Side view of the Behringer MiniAmp AMP800, demonstrating its compact form factor and the non-slip rubber feet designed to prevent scratching surfaces and provide stability during use.

Strømtilslutning: Connect the included power adapter to the 9V DC input on the rear panel of the AMP800. Plug the adapter into a suitable power outlet.
Lydindgang: Connect your audio source(s) to the INPUT A and/or INPUT B 1/4" TRS jacks on the rear panel. These inputs accept stereo signals. For mono signals, use a mono 1/4" TS cable.
Hovedtelefonforbindelse: Plug your headphones into the 1/4" TRS output jacks on the front panel. Each channel (CH 1-4) supports one set of headphones.
Cascading (Optional): To connect additional headphone amplifiers, use the PARALLEL LINK OUTPUT 1/4" TRS jacks on the rear panel to send the input signal to another amplivligere.

Betjeningsvejledning

Tænd: Press the POWER button on the front panel to turn on the unit. The power indicator LED will illuminate.
Valg af input: For each headphone channel (CH 1-4), use the INPUT A/B button to select which stereo input (A or B) will be routed to that channel. The corresponding LED will light up (A or B).
Justering af indgangsniveau: Adjust the LEVEL knob for INPUT A and INPUT B on the front panel to set the overall input signal strength. Monitor the CLIP LEDs; if they illuminate frequently, reduce the input level to prevent distortion.
Headphone Level Adjustment: For each headphone channel, use the PHONES LEVEL knob to adjust the individual volume for the connected headphones.
Balancekontrol: The BALANCE knob for each channel allows you to mix between the two input sources (A and B) if both are active. Turning the knob towards 'A' will favor input A, and towards 'B' will favor input B.

Opretholdelse

To ensure the longevity and optimal performance of your Behringer MiniAmp AMP800, følg disse vedligeholdelsesretningslinjer:

Rensning: Brug en blød, tør klud til at rengøre enhedens yderside. Brug ikke flydende rengøringsmidler eller opløsningsmidler, da de kan beskadige overfladen eller de indvendige komponenter.
Ventilation: Sørg for tilstrækkelig ventilation omkring enheden. Bloker ikke ventilationsåbninger.
Opbevaring: Når den ikke er i brug i længere perioder, skal den opbevares ampOpbevar apparatet på et køligt, tørt sted væk fra direkte sollys og ekstreme temperaturer.
Kabelstyring: Avoid excessive bending or crimping of cables. Use appropriate cable lengths to prevent strain on connectors.

Fejlfinding

If you encounter issues with your Behringer MiniAmp AMP800, se følgende almindelige fejlfindingstrin:

Ingen strøm: Ensure the power adapter is securely connected to both the unit and a working power outlet. Verify the power button is pressed.
Ingen lyd: Check all audio cable connections. Ensure the input source is active and sending a signal. Verify the correct input (A or B) is selected for the headphone channel. Increase the PHONES LEVEL and INPUT LEVEL knobs.
Forvrænget lyd: Reduce the INPUT LEVEL if the CLIP LED is frequently illuminating. Ensure the audio source signal is not overdriven. Check headphone impedance compatibility.
Brummen eller støj: Ensure all cables are properly shielded and connected. Try using different power outlets. Disconnect other electronic devices that might be causing interference.
One Channel Not Working: Test with different headphones and cables. Verify the input selection and level for that specific channel.

Specifikationer

Feature	Specifikation
Varens vægt	1.7 pund
Produktdimensioner	9.55 x 4.72 x 1.89 tommer
Modelnummer	AMP800
Farve	Sølv
Materiale	Metal
Strømkilde	Elektrisk med ledning
Voltage	230 volt
Wattage	11 watt
Kompatible enheder	Devices with 1/4 TRS connector

Hvad er der i æsken

Behringer MiniAmp AMP800 Stereo Headphone Amplivligere
Strømadapter
Brugervejledning (dette dokument)

Garanti og support

Behringer products are designed and manufactured to the highest quality standards. For detailed warranty information and technical support, please refer to the official Behringer webwebstedet eller kontakt deres kundeservice direkte. Gem din købskvittering som købsbevis i tilfælde af garantikrav.

For yderligere hjælp, besøg Behringer-butik på Amazon.

	Behringer MINIAMP AMP800 ultrakompakte 4-kanals stereohovedtelefoner Amplifier Quick Start Guide Quick start guide for the Behringer MINIAMP AMP800, an ultra-compact 4-channel stereo headphone amplifier. Includes safety instructions, controls overview, specifications, and warranty information in multiple languages.
	Behringer MicroAMP HA400 Ultrakompakte 4-kanals stereohovedtelefoner Amplivligere brugervejledning User manual for the Behringer MicroAMP HA400, a 4-channel stereo headphone amplifier. This document provides information on connections, controls, applications, safety instructions, specifications, warranty, and legal disclaimers in multiple languages.
	Behringer MICROMON MA400: Ultrakompakte monitorhovedtelefoner Amplivligere brugervejledning Udforsk Behringer MICROMON MA400, alsidige monitorhovedtelefoner ampDenne vejledning dækker dens funktioner til samtidig lydovervågning, uafhængig niveaukontrol og sikker betjening.
	Behringer PM1 Quick Start Guide: Personal Monitor Amplivligere Get started quickly with the Behringer PM1 Personal Monitor Amplifier. This guide covers essential safety instructions, control descriptions, connection details, technical specifications, and warranty information for your Behringer PM1.
	Behringer ULTRABASS BXD3000H Lynstartguide: Opsætning og betjening Kom hurtigt i gang med Behringer ULTRABASS BXD3000H bassen ampDenne vejledning dækker tilslutning, betjeningselementer, specifikationer og vigtige sikkerhedsoplysninger til din 300W, 2-kanals bashøjttaler. amp.
	BEHRINGER iNUKE-serien: Kraftig, let DSP PA Amplivførere Opdag BEHRINGER iNUKE-serien af ultralette PA-højttalere med høj densitet ampDisse har avanceret klasse-D-teknologi, omfattende DSP-kontrol og en betydelig effekt. ampLifiers er designet til professionelle lydapplikationer og tilbyder overlegen ydeevne og bærbarhed.

Behringer AMP800