Behringer Xenyx 1202 User Manual
8-channel Analog Mixer
Indledning
This manual provides detailed instructions for the setup, operation, and maintenance of your Behringer Xenyx 1202 analog mixer. The Xenyx 1202 is a premium ultra-low noise, high headroom analog mixer designed for various audio applications, featuring Xenyx mic preamps og britiske EQ'er.
Vigtige sikkerhedsinstruktioner
- Læs disse instruktioner omhyggeligt, før du betjener enheden.
- Gem disse instruktioner til fremtidig reference.
- Overhold alle advarsler på produktet og i betjeningsvejledningen.
- Brug ikke dette apparat i nærheden af vand eller i ekstremt fugtige omgivelser.
- Rengør kun med en tør klud.
- Bloker ikke ventilationsåbninger. Installer i overensstemmelse med producentens anvisninger.
- Må ikke installeres i nærheden af varmekilder såsom radiatorer, varmeapparater, komfurer eller andre apparater (inklusive ampløftere), der producerer varme.
- Beskyt netledningen mod at blive trådt på eller klemt, især ved stik, stikkontakter og det sted, hvor de kommer ud af apparatet.
- Brug kun tilbehør/tilbehør specificeret af producenten.
- Træk stikket ud af dette apparat under tordenvejr, eller når det ikke skal bruges i længere perioder.
Hvad er der i æsken
- Behringer Xenyx 1202 Mixer
- Strømforsyningsenhed
- Brugervejledning (dette dokument)
Produkt overview
The Behringer Xenyx 1202 features a compact design with intuitive controls for easy operation. Below are images illustrating the mixer's layout and various connection points.
Figur 1: Øverst view of the Behringer Xenyx 1202 mixer, highlighting the microphone inputs, line inputs, EQ sections, and main mix controls.
Figur 2: Vinklet view of the Behringer Xenyx 1202, providing a perspective on its overall dimensions and the arrangement of its various knobs and faders.
Kontrol på frontpanelet
- XENYX Mic Preamps: Four high-quality microphone preamps with XLR inputs for channels 1-4.
- Linjeindgange: 1/4" TRS balanced/unbalanced inputs for all channels. Channels 5-12 are stereo pairs.
- Gain Control: Adjusts the input sensitivity for microphone and line inputs.
- 3-bånds EQ: High, Mid, and Low frequency controls on each mono channel for tone shaping.
- FX Send: Sends signal to an external effects processor.
- Pan/Balance: Positions the signal in the stereo field.
- Niveaukontrol: Adjusts the output level of individual channels.
- Fantomstrøm (+48V): Supplies power to condenser microphones. Activated via a switch on the main section.
- Main Mix Fader: Styrer det samlede udgangsniveau for hovedstereomixet.
- Phones/Control Room: Dedicated output for headphones and control room monitors.
Opsætning
Follow these steps to set up your Xenyx 1202 mixer for initial use.
Figur 3: Bagside view of the Behringer Xenyx 1202, displaying the power input, main outputs, control room outputs, and 2-track I/O.
- Strømtilslutning: Connect the supplied power adapter to the DC IN socket on the rear panel of the mixer. Plug the adapter into a suitable power outlet. Note: The unit does not have a dedicated on/off switch; it powers on when connected to the mains.
- Hovedudgange: Tilslut dine hovedhøjttalere eller amplifier to the MAIN OUT (L/R) 1/4" TRS jacks on the rear panel.
- Control Room/Phones: Connect your studio monitors to the CTRL ROOM OUT (L/R) 1/4" TRS jacks and your headphones to the PHONES 1/4" TRS jack.
- Mikrofonindgange: For microphones, connect XLR cables to the MIC inputs (channels 1-4). If using condenser microphones, ensure +48V Phantom Power is engaged (see Operating Instructions).
- Linjeindgange: Connect instruments, keyboards, or other audio devices to the LINE IN 1/4" TRS jacks. Use channels 5-12 for stereo sources.
- 2-Track I/O: Use the 2-TR IN/OUT RCA connectors for connecting external recording devices or playback sources like CD players.
Betjeningsvejledning
Grundlæggende blanding
- Indledende indstillinger: Before powering on, ensure all GAIN controls are at minimum, all channel LEVEL controls are at minimum, and the MAIN MIX fader is at minimum.
- Tilslut kilder: Plug in your microphones, instruments, and other audio sources as described in the Setup section.
- Tænd: Connect the mixer's power adapter to a power outlet.
- Indstil forstærkning: For each active channel, gradually increase the GAIN control while speaking into the microphone or playing the instrument. Observe the CLIP LED; it should only flash occasionally on the loudest peaks. Adjust GAIN until the signal is strong without clipping.
- Adjust Channel Level: Slowly raise the channel LEVEL control for each active input to bring the signal into the mix.
- Use EQ: Adjust the HIGH, MID, and LOW EQ controls to shape the tone of each channel.
- Pan/Balance: Use the PAN control (mono channels) or BALANCE control (stereo channels) to position the sound in the stereo field.
- Hovedmix: Slowly raise the MAIN MIX fader to bring up the overall volume of your mix. Monitor the main output level meters to avoid clipping.
Fantomstrøm (+48V)
The Xenyx 1202 provides +48V phantom power for condenser microphones. To activate, ensure all microphone channels are muted or their levels are turned down, then press the PHANTOM switch located in the main section. The corresponding LED will illuminate. Always turn off phantom power before connecting or disconnecting condenser microphones to prevent damage.
FX Send
The FX SEND control on each channel allows you to send a portion of that channel's signal to an external effects processor. Connect the FX SEND jack on the mixer to the input of your effects unit. Return the processed signal from your effects unit's output to one of the stereo line inputs (e.g., channels 7/8 or 9/10) on the mixer.
Opretholdelse
- Rensning: Disconnect the mixer from power before cleaning. Use a soft, dry cloth to wipe down the surface. Do not use liquid cleaners or aerosols.
- Ventilation: Sørg for, at ventilationsåbningerne er fri for støv og snavs for at forhindre overophedning.
- Opbevaring: Når mixeren ikke er i brug i længere perioder, skal den opbevares køligt og tørt, væk fra direkte sollys og ekstreme temperaturer.
- Strømforsyning: Handle the power supply and its connection carefully. Repeatedly wiggling or stressing the connection can lead to wear.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Ingen lydudgang | Main Mix fader is down; Channel level is down; Cables are not connected properly; Speakers/amper slukket eller lydløs. | Raise Main Mix fader; Raise channel level; Check all cable connections; Ensure speakers/amplifier are on and unmuted. |
| Brummen eller støj i lyden | Ground loop; Faulty cables; High gain setting; Nearby electronic interference. | Use balanced cables; Check cable integrity; Reduce gain if not needed; Move mixer away from other electronics; Use a power conditioner. |
| Signal clipping (CLIP LED constantly on) | Indgangsforstærkningen er for høj. | Reduce the GAIN control for the offending channel until the CLIP LED only flashes occasionally on peaks. |
| Kondensatormikrofonen virker ikke | Phantom power not activated. | Press the +48V PHANTOM switch to activate phantom power. |
| Intermitterende strøm | Loose power adapter connection. | Ensure the power adapter is securely plugged into the mixer and the wall outlet. Avoid stressing the connection. |
Specifikationer
| Feature | Detalje |
|---|---|
| Varens vægt | 4.74 pund (2.15 kg) |
| Produktdimensioner | 9.53 x 8.66 x 1.85 tommer (24.2 x 22 x 4.7 cm) |
| Modelnummer | 1202 |
| Farve Navn | Sort |
| Strømkilde | Elektrisk med ledning |
| Antal kanaler | 12 (4 mono, 4 stereo) |
| Mic Preamps | 4 Xenyx Mic Preamps |
| EQ | 3-band "British" EQ on mono channels |
| Aux sender | 1 Aux Send per channel |
| Forbindelsesteknologi | Analog (USB connectivity not directly on this model, may refer to other variants or accessories) |
Garanti og support
Behringer products are designed for reliability and performance. For specific warranty information, please refer to the warranty card included with your product or visit the official Behringer webwebsted. Garantivilkårene kan variere fra region til region.
For technical support, service, or spare parts, please contact your local Behringer distributor or authorized service center. You can also find additional resources and FAQs on the Behringer official webwebsted.
For en PDF-version af brugermanualen, der kan downloades, kan du besøge: Behringer Xenyx 1202 User Manual (PDF)
