Indledning
This instruction manual provides essential information for the proper installation, operation, and maintenance of your Barnett Performance Products Extra-Plate Clutch Kit, model 307-30-20011. Adhering to these guidelines will help ensure optimal performance and longevity of your clutch system. Please read all instructions thoroughly before beginning any work.
Vigtig sikkerhedsmeddelelse: Installation of clutch components requires mechanical aptitude and specialized tools. If you are not confident in your ability to perform this installation safely and correctly, it is highly recommended to seek assistance from a qualified professional mechanic.
Produkt overview
The Barnett Extra-Plate Clutch Kit is designed to enhance clutch performance by increasing the friction surface area. This kit typically replaces the original clutch components, including the stock riveted steel plate found in some applications, providing a more robust and reliable clutch engagement.
Image: Barnett Extra-Plate Clutch Kit components, featuring a stack of nine friction plates (darker, textured) and eight steel drive plates (lighter, metallic) designed for increased surface area.
Sættets indhold:
- Nine (9) Friction Plates: These plates feature a carbon fiber material for improved grip and durability.
- Eight (8) Steel Drive Plates: Precision-machined steel plates that interact with the friction plates.
- Note: This kit is designed to eliminate the need for the stock riveted steel plate, which is often a point of failure in some original equipment clutch assemblies.
Opsætning og installation
Proper installation is critical for the performance and longevity of your new clutch kit. Refer to your vehicle's specific service manual for detailed disassembly and reassembly procedures, as this guide provides general steps.
Nødvendigt værktøj og materialer:
- Køretøjsspecifik servicemanual
- Clutch spring compression tool
- Heavy-duty snap ring pliers
- Momentnøgle
- New primary fluid (if applicable)
- Gaskets and seals (as required by vehicle manual)
Installationstrin:
- Forberedelse: Ensure the vehicle is on a stable, level surface. Disconnect the battery. Drain primary fluid if necessary, following your vehicle's service manual.
- Access Clutch: Remove the primary cover and any other components required to access the clutch assembly.
- Demontering: Using a clutch spring compression tool, compress the clutch spring assembly. Carefully remove the retaining snap ring with heavy-duty snap ring pliers. Decompress the springs and remove the pressure plate, clutch springs, and the original clutch pack.
- Remove Stock Spring Plate: If your original clutch assembly includes a riveted spring plate, remove and discard it. The Barnett Extra-Plate kit is designed to replace this component.
- Install New Plates: Install the Barnett friction and steel plates into the clutch hub, alternating them according to your vehicle's service manual and Barnett's specific instructions (typically starting and ending with a friction plate). Ensure plates are properly seated.
- Reassemble Clutch: Reinstall the pressure plate, clutch springs, and spring compression tool. Compress the springs and carefully reinstall the retaining snap ring. Ensure the snap ring is fully seated in its groove.
- Afsluttende samling: Reinstall the primary cover with new gaskets and seals as needed. Refill primary fluid to the correct level.
- Koblingsjustering: Adjust the clutch cable and lever free play according to your vehicle's service manual. Proper adjustment is crucial for correct clutch operation and to prevent premature wear.
Betjeningsvejledning
After installation, the Barnett Extra-Plate Clutch Kit should provide a crisp and responsive engagement. A short break-in period may be beneficial, typically involving a few gentle engagements and disengagements to allow the new friction material to seat properly.
- Smooth Engagement: Engage and disengage the clutch smoothly. Avoid rapid or harsh engagements, especially during the initial break-in period.
- Proper Shifting: Ensure the clutch fully disengages when the lever is pulled to allow for smooth gear changes.
- Listen for Abnormalities: Pay attention to any unusual noises, slipping, or dragging sensations, which may indicate an issue requiring attention.
Opretholdelse
Regular maintenance helps prolong the life of your clutch kit and ensures consistent performance.
- Koblingsjustering: Periodically check and adjust clutch cable free play as specified in your vehicle's service manual. Incorrect adjustment can lead to premature wear or clutch drag.
- Primary Fluid: If applicable, ensure your primary fluid is at the correct level and changed according to your vehicle's maintenance schedule. Use the recommended type of fluid.
- Inspektion: During routine maintenance, inspect the clutch components for signs of wear, such as discoloration, warping, or excessive grooving on the plates.
Fejlfinding
This section addresses common issues you might encounter with your clutch and potential solutions.
| Symptom | Mulig årsag | Løsning |
|---|---|---|
| Clutch Slipping | Incorrect clutch adjustment, worn plates, incorrect fluid, weak springs. | Adjust clutch cable, inspect and replace worn plates/springs, verify correct fluid type and level. |
| Clutch Dragging / Difficulty Shifting | Incorrect clutch adjustment, warped plates, air in hydraulic system (if applicable). | Adjust clutch cable, inspect and replace warped plates, bleed hydraulic system. |
| Unusual Noises (e.g., squealing) | Contaminated plates, worn components, improper installation. | Inspect clutch for contamination or wear, verify proper installation. |
If troubleshooting steps do not resolve the issue, consult a qualified mechanic or contact Barnett Performance Products customer support.
Specifikationer
- Modelnummer: 307-30-20011
- Sættets indhold: 9 Friction Plates, 8 Steel Drive Plates
- Friktionsmateriale: Kulfiber
- Increased Surface Area: Adds 12% more surface area to clutch pack compared to standard configurations.
- Eliminates: Stock riveted steel plate (where applicable)
- Produktvægt: Cirka 2 pund
- Produktdimensioner: Cirka 4 x 10 x 10 cm (emballage)
- Oprindelse: Fremstillet i USA
Garanti og support
Barnett Performance Products stands behind the quality of its products. For specific warranty information regarding your Extra-Plate Clutch Kit, please refer to the warranty documentation included with your purchase or visit the official Barnett Performance Products webwebsted.
For technical support, installation questions, or warranty claims, please contact Barnett Performance Products directly through their official channels. Ensure you have your product model number (307-30-20011) and purchase details available when contacting support.
Fabrikant: Barnett Performance Products
