Alessi AMGI01 Mr. Cold Liquid Soap Dispenser User Manual

Introduktion og overview

This manual provides essential information for the safe and effective use of your Alessi AMGI01 Mr. Cold Liquid Soap Dispenser. Designed by Massimo Giacon, this dispenser combines functionality with a distinctive aesthetic, making it a unique addition to any space.

Produktegenskaber

• Refillable liquid soap dispenser.
• Constructed from durable thermoplastic resin.
• Unique "Mr. Cold" character design.
• Capacity: Approximately 19.3 fluid ounces (0.57 liters).
• Free from harmful materials: DEHP Free, BPA Free, Mercury Free, Nickle Free, Latex Free, Phthalate Free, Cadmium Free, PVC Free, Lead Free.

Opsætning

1. Udpakning: Carefully remove all components from the packaging. Ensure no parts are missing or damaged.
2. Placering: Place the dispenser on a stable, flat surface in your desired location, such as a bathroom countertop or kitchen sink area.
3. Påfyldning af dispenseren:
   • Gently twist and lift the top "head" portion of the dispenser to remove it from the base.
   • Pour your preferred liquid soap into the reservoir, ensuring not to overfill. The maximum capacity is 19.3 fl oz (0.57 liters).
   • Replace the top portion, aligning it correctly and twisting gently until secure.

Betjeningsvejledning

The Alessi AMGI01 dispenser is designed for simple operation.

1. Dosering af sæbe: Place your hand under the nozzle. Gently press down on the top of the "Mr. Cold" character's head.
2. Amount of Soap: The amount of soap dispensed can be controlled by the pressure and duration of the press.

Opretholdelse

• Regelmæssig rengøring: Tør dispenserens yderside regelmæssigt af med en blød klud.amp cloth and mild soap to remove any soap residue or dust.
• Dyb rengøring: For a more thorough cleaning, disassemble the dispenser by removing the top portion. Rinse both parts with warm water. Ensure all soap residue is removed from the pump mechanism.
• Tørring: Lad alle dele lufttørre helt, før de samles og fyldes op igen.
• Undgå barske kemikalier: Do not use abrasive cleaners, solvents, or strong chemicals, as these may damage the thermoplastic resin finish.

Fejlfinding

Dispenser Not Pumping Soap

• Check Soap Level: Ensure there is sufficient liquid soap in the reservoir.
• Forbered pumpen: If the dispenser is new or has been refilled, it may require several presses to prime the pump and start dispensing soap.
• Clog in Nozzle: Check the nozzle for any dried soap or blockages. Clean with warm water if necessary.

Utætte

• Sikker samling: Ensure the top portion of the dispenser is correctly aligned and securely twisted onto the base.
• Overfyldning: Avoid overfilling the dispenser beyond its recommended capacity.

Specifikationer

Garanti og support

For warranty information, product support, or to purchase replacement parts, please contact Alessi customer service directly. Refer to the official Alessi webwebstedet eller produktemballagen for de mest aktuelle kontaktoplysninger.