1. Introduktion
This manual provides essential information for the safe and effective use of your Eiko EYB 82V 360W T3-1/2 G5.3 Base Halogen Lamp. Please read these instructions carefully before installation and operation to ensure proper function and longevity of the product.
2. Sikkerhedsoplysninger
Halogen lamps operate at high temperatures and contain pressurized gas. Improper handling or use can result in personal injury or property damage. Adhere to the following safety guidelines:
- Always disconnect power to the fixture before installing, removing, or cleaning the lamp.
- Tillad lamp to cool completely before handling to prevent burns.
- Avoid touching the glass envelope of the lamp with bare hands. Oils from skin can create hot spots, leading to premature failure. Use a clean cloth or gloves during handling.
- Overskrid ikke den angivne voltage og wattage til dit armatur.
- Sørg for at lamp is securely seated in its base before applying power.
- Bortskaf brugt lamps according to local environmental regulations.
3. Opsætning og installation
Follow these steps for proper installation of the Eiko EYB halogen lamp:
- Strømafbrydelse: Ensure the power supply to the fixture is completely turned off and locked out if possible.
- Køling: Hvis du udskifter en eksisterende lamp, allow it to cool down for at least 15 minutes to prevent burns.
- Old Lamp Fjernelse (hvis relevant): Carefully grasp the old lamp and pull it straight out from the G5.3 base. Avoid twisting if the base is a push-in type.
- Ny Lamp Håndtering: Handle the new Eiko EYB lamp by its ceramic base. Do not touch the glass bulb with bare hands. If the glass is accidentally touched, clean it thoroughly with rubbing alcohol and a lint-free cloth before installation.
- Indskud: Align the two pins of the Eiko EYB lamp with the holes in the G5.3 base. Gently push the lamp straight into the base until it is fully seated. Do not force the lamp.
- Genopkobling af strøm: Når den lamp er sikkert installeret, skal strømmen til armaturet genoprettes.
Et nærbillede view of the Eiko EYB halogen lamp, showing its clear glass envelope, coiled tungsten filament, and the white ceramic G5.3 base with two metal pins. The base is labeled with 'EIKO EYB 82V 360W CHINA'.
4. Betjeningsvejledning
The Eiko EYB halogen lamp is designed for straightforward operation within compatible fixtures.
- Tænd/sluk: Activate the fixture's power switch to turn the lamp til eller fra.
- Dæmpning (hvis relevant): Denne lamp is dimmable. If your fixture is equipped with a compatible dimmer switch, you can adjust the light output. Ensure the dimmer is rated for halogen lamps and the total wattage of the installed lamps.
5. Vedligeholdelse
Regular maintenance helps ensure optimal performance and longevity of your Eiko EYB halogen lamp.
- Rensning: Hvis lamp's glass envelope becomes dusty or dirty, disconnect power and allow it to cool. Gently wipe the glass with a clean, dry, lint-free cloth. For stubborn marks, use a small amount of rubbing alcohol.
- Inspektion: Efterse lamp for any signs of damage or discoloration. If the lamp appears dim or flickers, it may be nearing the end of its lifespan.
- Udskiftning: Udskift lamp when it fails or when its light output significantly diminishes. Always replace with a lamp af samme bindtage og wattage (Eiko EYB 82V 360W) to ensure compatibility and safety.
6. Fejlfinding
If you encounter issues with your Eiko EYB halogen lamp, se følgende almindelige problemer og løsninger:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Lamp lyser ikke | No power to fixture, loose connection, faulty lamp, faulty fixture | Check power supply, ensure lamp is fully seated, replace lamp, inspect fixture wiring |
| Lamp er dæmpet | Lamp næsten slutningen af levetiden, forkert volumentage, dirty glass | Udskift lamp, verify fixture voltage, clean lamp glas |
| Lamp fails prematurely | Over-voltage, improper handling (fingerprints), excessive vibration, faulty fixture | Bekræft armaturvolumentage, handle with gloves, ensure stable mounting, inspect fixture |
If problems persist after attempting these solutions, consult a qualified electrician or the fixture manufacturer.
7. Specifikationer
Key technical specifications for the Eiko EYB 82V 360W T3-1/2 G5.3 Base Halogen Lamp:
- Mærke: Eiko
- Model: EYB
- Voltage: 82 volt
- Wattage: 360 watt
- Lystype: Halogen
- Pæreform Størrelse: T3-1/2
- Pære base: G5.3
- Lys farve: Lyse hvid
- Farvetemperatur: 3300 Kelvin
- Lysstyrke: 10000 lumen
- Materiale: Wolfram
- Produktdimensioner: 1 x 1 x 2.7 tommer
- Varens vægt: 1.6 ounce
- Speciel funktion: Dæmpbar
8. Garantioplysninger
This product is covered by the manufacturer's standard warranty. For specific details regarding warranty terms, duration, and claims procedures, please refer to the official Eiko webwebstedet eller kontakt Eiko kundeservice direkte. Gem din købskvittering som købsbevis.
9. Support og kontaktoplysninger
For technical assistance, product inquiries, or further support, please contact Eiko customer service.
- Fabrikant: Eiko
- Webwebsted: Refer to Eiko's official webwebstedet for aktuelle kontaktoplysninger.
- Kundeservice: Refer to Eiko's official webwebstedet for aktuelle kontaktoplysninger.
