1. Introduktion
The BELL 5374-0 Blank Round Flat Weatherproof Cover is designed to provide robust protection for electrical splice boxes in outdoor or damp environments. Constructed from durable metal with a powder-coated gray finish, this cover ensures maximum weatherability and scratch resistance. It is specifically designed for use with 4-inch round splice boxes and includes all necessary installation hardware and a gasket for a secure, watertight seal.
2. Produktfunktioner
- Rugged metallic construction for enhanced durability.
- Avanceret pulverlakering giver maksimal vejrbestandighed og ridsefasthed.
- Includes gasket and mounting hardware for complete installation.
- Designed for 4-inch round splice boxes.
- NEMA 3R rated for outdoor use.
3. Sikkerhedsoplysninger
Overhold altid følgende sikkerhedsforanstaltninger under installation og vedligeholdelse:
- FARE: Risk of electric shock. Turn off power at the circuit breaker or fuse box before installing or servicing.
- Ensure all electrical work complies with local and national electrical codes. If unsure, consult a qualified electrician.
- Brug ikke dette produkt til andre formål end dets tilsigtede brug.
- Inspect the cover and gasket for any damage before installation. Do not install damaged components.
- Hold børn og uautoriserede personer væk fra arbejdsområdet.
4. Pakkens indhold
Kontroller, at alle elementer er til stede, før installationen påbegyndes:
- 1 x BELL 5374-0 Blank Round Flat Weatherproof Cover
- 1 x pakning
- Monteringshardware (skruer)
- Flersprogede instruktioner (denne manual)
5. Opsætning og installation
This weatherproof cover is designed for easy installation on standard 4-inch round splice boxes. Follow these steps for proper installation:
- Sluk for strømmen: Before starting, ensure the power to the electrical box is completely turned off at the circuit breaker or fuse box. Verify with a voltage tester.
- Forbered kassen: Ensure the 4-inch round splice box is clean and free of debris.
- Placer pakningen: Place the provided gasket onto the back of the weatherproof cover, aligning the screw holes. The gasket creates a seal against moisture.
- Juster dækslet: Position the cover with the gasket over the 4-inch round splice box, aligning the screw holes on the cover with those on the box. The cover supports horizontal/vertical mounting.
- Fastgør dækslet: Insert the provided mounting screws through the cover and gasket into the splice box. Tighten the screws evenly until the cover is snug and the gasket is compressed, creating a weatherproof seal. Do not overtighten.
- Bekræft installationen: Once installed, gently attempt to move the cover to ensure it is securely fastened and does not wobble.
- Gendan strøm: After confirming secure installation, restore power to the circuit.
Figur 5.1: Forside view of the BELL 5374-0 weatherproof cover, showing its blank, round design and screw holes.
Figure 5.2: Diagram illustrating the dimensions of the BELL 5374-0 cover, showing a diameter of 4.125 inches and a thickness of 0.063 inches.
6. Operating the Cover
The BELL 5374-0 is a blank weatherproof cover designed to seal and protect the contents of a 4-inch round electrical splice box from environmental elements such as rain, dust, and debris. Once properly installed, the cover operates passively by maintaining a sealed enclosure. No active operation is required.
7. Vedligeholdelse
Regular maintenance ensures the longevity and effectiveness of your weatherproof cover:
- Rensning: Periodically wipe the cover with a damp cloth to remove dirt, dust, or grime. Avoid abrasive cleaners that could damage the powder-coated finish.
- Inspektion: Annually inspect the cover and gasket for any signs of wear, cracking, or damage. Ensure the mounting screws remain tight. If the gasket appears compromised, it should be replaced to maintain the weatherproof seal.
- Genmaling: While the powder coat finish is durable, if the cover needs to be repainted to match a new exterior color, ensure the paint is suitable for metal and outdoor use.
8. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Cover does not fit flush. | Incorrect box size; debris behind cover; gasket misaligned. | Ensure box is 4-inch round. Clean mounting surface. Realign gasket. |
| Water ingress around cover. | Gasket damaged or missing; screws not tightened sufficiently; improper installation. | Inspect and replace gasket if damaged. Tighten screws evenly. Re-install following instructions carefully. |
| Cover appears scratched or faded. | Normal wear and tear; exposure to harsh elements. | Clean the surface. Consider repainting with an appropriate outdoor metal paint if desired. |
9. Specifikationer
| Attribut | Detalje |
|---|---|
| Modelnummer | 5374-0 |
| Mærke | KLOKKE (Hubbell) |
| Materiale | Metal, Stål |
| Farve | Grå |
| Slutte | Pulverlakeret |
| Dimensioner (produkt) | Approximately 4.125 inches (Diameter) x 0.063 inches (Thickness) |
| Varens vægt | 2.24 ounce |
| Monteringstype | Screw In (Horizontal/Vertical) |
| NEMA Rating | 3R (Vejrbestandig) |
| Certificeringer | CSA certified, UL listed |
| Kompatibilitet | 4-inch Round Splice Boxes |
10. Garanti og support
For information regarding product warranty, please refer to the documentation provided at the time of purchase or visit the official BELL (Hubbell) website. For technical support or inquiries, please contact BELL customer service directly.
Fabrikant: Hubbell
Mærke: KLOKKE
Webwebsted: www.hubell.com (General Hubbell site, as specific BELL site not provided)
