SOLO 418 One-Hand Pressure Sprayer Instruction Manual

1. Produktet er slutview

The SOLO 418 One-Hand Pressure Sprayer is a versatile tool designed for various applications including gardening, fertilizing, cleaning, and general spraying tasks. Its ergonomic design and efficient pressure system make it easy to use for both indoor and outdoor needs.

Nøglefunktioner:

• Unique Drift/Drip Guards: Allows for controlled spraying, minimizing overspray and drips.
• Reduces Hand Fatigue: Features a lock-on trigger for continuous spraying without constant pressure from the user.
• Letvægtsdesign: Easy to carry and maneuver for various tasks.
• Nem at bruge: Simple filling, pressurization, and spraying mechanism.
• Multi-Directional Nozzle: Adjustable nozzle for various spray patterns.
• Viton® Seals: Durable seals for compatibility with a range of chemicals.

2. Sikkerhedsoplysninger

Always read and understand all instructions before using this sprayer.

• Do not spray towards face or eyes. Always wear appropriate eye protection when spraying.
• Pressure may build up - use caution.
• Do not puncture or burn the container.
• Use only recommended chemicals. Ensure the chemical is compatible with Viton® seals.
• Opbevares utilgængeligt for børn.
• Dispose of properly according to local regulations for both the sprayer and any chemical residues.
• Avoid contact with spray and spray solutions.
• Do not put heated or self-heating solutions into the sprayer.
• Inspect sprayer before each use. If any component shows damage, replace before using the sprayer.
• Release pressure if you are unable to spray or before opening the tank.
• Carefully read labels on the chemicals being used in this sprayer. Make sure this sprayer is the proper tool to use with the chemicals being sprayed.

3. Opsætning

3.1 Udpakning og første inspektion

Carefully remove all components from the packaging. Inspect the sprayer for any signs of damage that may have occurred during shipping. Ensure all parts are present as listed in the product documentation.

3.2 Fyldning af tanken

1. Unscrew the pump assembly from the tank by turning it counter-clockwise.
2. Pour the desired liquid (water, herbicide, pesticide, fertilizer, cleaning solution) into the tank. Do not exceed the maximum fill line (1 Liter / 0.26 Gallons).
3. Screw the pump assembly back onto the tank, ensuring it is securely tightened to prevent leaks.

4. Betjening

4.1 Pressurizing the Tank

With the tank filled and the pump assembly securely attached, pump the handle up and down approximately 30 times until resistance is felt. This builds pressure within the tank, allowing for continuous spraying.

4.2 Justering af dysen

The nozzle can be adjusted to produce various spray patterns, from a fine mist to a solid stream. Turn the nozzle tip clockwise for a finer mist and counter-clockwise for a coarser spray or stream.

4.3 Sprøjtning

1. Aim the nozzle at the target area.
2. Press the trigger on the handle to begin spraying.
3. For continuous spraying, push the red lock-on trigger forward while holding the main trigger. Release the red lock to stop continuous spraying.

4.4 Relateretasing Tryk

Before refilling or storing the sprayer, it is important to release any remaining pressure. Pull the small green pressure release valve located on the top of the tank to safely depressurize the unit.

5. Vedligeholdelse

5.1 Rengøring efter brug

After each use, especially when using chemicals, thoroughly clean the sprayer. Fill the tank with clean water and spray until the tank is empty to flush out any residues. Disassemble the nozzle and rinse all components.

5.2 Oiling the Pump

Periodically, apply a small amount of lubricant (e.g., silicone oil, not WD40 as it may degrade seals) to the pump rod where it enters the pump assembly. This ensures smooth operation and extends the life of the pump seals. If the pump does not build pressure effectively, it may need oiling or the seals may need inspection.

5.3 Opbevaring

Store the sprayer in a cool, dry place away from direct sunlight. Always release pressure from the tank before storing. Do not store with chemicals inside for extended periods.

6. Fejlfinding

6.1 Sprayer Not Building Pressure

• Check if the pump assembly is securely tightened to the tank.
• Inspect the O-rings and seals for wear or damage. Replace if necessary.
• Ensure the pump rod is adequately lubricated.

6.2 Nozzle Clogging or Uneven Spray

• Disassemble the nozzle and clean any debris.
• Ensure the liquid being sprayed is free of particles that could cause blockages.
• Adjust the nozzle tip to achieve the desired spray pattern.

6.3 Leaking from Pump Handle or Tank

• Kontroller alle forbindelser for tæthed.
• Inspect O-rings and seals for damage or improper seating. Replace worn seals.
• Ensure the pressure release valve is fully seated when not in use.

7. Specifikationer

8. Officiel produktvideo

9. Garanti og support

For warranty information, replacement parts, or further support, please refer to the official SOLO product webwebstedet eller kontakt deres kundeservice. Gem din købskvittering til garantikrav.