1. Introduktion
The Gardner Bender PS-75 Insulated Staples are designed for securely fastening Romex, UF, and NM non-metallic cables. These staples feature UV-resistant polyethylene saddles and zinc-plated nails, ensuring durability and protection for your wiring installations. They are engineered for fast and easy installation, preventing wood splitting and cable damage.
2. Nøglefunktioner
- UV-Resistant Polyethylene Saddle: Designed to resist rust, rot, and deterioration, ensuring long-lasting performance in various environments.
- Zinc-Plated Nails: Provides enhanced resistance against rust and corrosion.
- Fast and Easy Installation: Nails drive together without splitting wood, simplifying the installation process.
- Recessed Nail Heads: Minimizes exposure for a cleaner finish and reduced snagging.
- Smooth Saddle Design: The 3/8-inch wide saddle prevents damage to cable insulation.
- Alsidig kompatibilitet: Suitable for 1/2" and 3/4" Romex cables, and UF and NM cables up to 3-conductor (#10).
3. Produktspecifikationer
| Specifikation | Detalje |
|---|---|
| Fabrikant | Gardner Bender |
| Varenummer | PS-75 |
| Varens vægt | 1.6 ounces (0.1 pund) |
| Størrelse | ¾ tomme |
| Farve | Hvid |
| Stil | 50 stk |
| Slutte | Forzinket |
| Materiale | UV-Resistant Polyethylene Saddle with Zinc-Plated Nails |
| Antal stykker | 50 |
| Kompatibelt fastgørelsessortiment | 1/2" and 3/4" Romex cables, UF and NM cable up to 3-conductor (#10) |
4. Installationsvejledning
Follow these steps for proper installation of Gardner Bender PS-75 Insulated Staples:
- Forbered kablet: Ensure the cable you intend to secure is properly routed and ready for fastening.
- Position the Staple: Place the insulated staple over the cable, ensuring the cable sits snugly within the polyethylene saddle. The saddle is designed to protect the cable's insulation.
- Align the Nails: Position the staple against the wooden surface (e.g., stud, joist) where the cable needs to be secured. Ensure the two zinc-plated nails are aligned to drive straight into the wood.
- Hammer the Nails: Using a hammer, gently tap both nails simultaneously until the staple is firmly secured to the surface. The design allows both nails to drive together without splitting the wood. Ensure the nails are driven flush, with the recessed heads minimizing exposure.
- Bekræft sikkerhed: After installation, gently tug on the cable to ensure it is securely held by the staple and there is no excessive movement.
These staples are suitable for securing a single cable or multiple cables (up to four electrical wires, depending on their gauge and the staple's capacity) within a single staple, provided they fit without pinching or damaging the insulation.
5. Retningslinjer for brug
The PS-75 insulated staples are intended for organizing and securing non-metallic sheathed cables (Romex, UF, NM) in residential and commercial wiring applications. Their primary function is to keep cables neatly routed and protected along wooden framing members. Always ensure the cable is not compressed or damaged during installation to maintain electrical integrity and safety.
6. Pleje og vedligeholdelse
Gardner Bender PS-75 Insulated Staples require minimal maintenance. Store them in a dry place to prevent any potential corrosion of the zinc-plated nails, although they are designed to resist rust. Inspect installed staples periodically to ensure they remain securely fastened and that cables are not damaged. Replace any staples that appear loose or compromised.
7. Fejlfinding
- Staple Not Holding Securely: Ensure the nails are driven fully into the wood. If the wood is too soft or damaged, relocate the staple to a more solid area.
- Wood Splitting During Installation: This product is designed to prevent wood splitting. If splitting occurs, ensure you are driving both nails simultaneously and not applying excessive force. Consider pre-drilling a small pilot hole in very hard wood, though typically not required.
- Kabelskade: If the cable insulation appears pinched or damaged after installation, the staple may be too small for the cable size, or it was installed improperly. Remove the staple and replace it with an appropriately sized staple, ensuring the cable fits loosely within the saddle before fastening.
8. Sikkerhedsadvarsler
ADVARSEL: Dette produkt kan udsætte dig for kemikalier, herunder bly, som i staten Californien er kendt for at forårsage kræft og fosterskader eller anden reproduktiv skade. For mere information gå til www.P65Warnings.ca.gov.
- Always disconnect power before working with electrical wiring.
- Use appropriate personal protective equipment (PPE) such as safety glasses.
- Ensure staples are correctly sized for the cable to avoid damaging insulation or conductors.
- Do not over-tighten staples, as this can compress the cable and lead to electrical issues.
- Follow all local electrical codes and regulations for cable installation.
9. Garanti og support
For information regarding warranty, technical support, or product inquiries, please contact Gardner Bender customer service or visit their official website. Specific warranty details may vary and are typically provided with the product packaging or on the manufacturer's webwebsted.
