1. Introduktion
This manual provides essential instructions for the safe operation, setup, maintenance, and troubleshooting of your DEWALT DW715 12-Inch Compound Miter Saw. Designed for precision and durability, this saw is equipped with a powerful 15 Amp motor, delivering 4,000 rpm for efficient cutting of various materials. Please read this manual thoroughly before operating the saw to ensure proper use and to prevent injury.
Vigtige sikkerhedsoplysninger: For safe operation, always read and understand the instruction manual completely before using this product. Failure to follow all instructions may result in serious injury.
2. Opsætning og montering
Upon receiving your DEWALT DW715 miter saw, carefully unpack all components and inspect for any damage. Ensure all parts listed in the packing contents are present. The saw comes partially assembled, requiring minimal setup before use.
2.1 Bladinstallation
The saw includes a carbide blade and a blade wrench for installation. Refer to the detailed instructions in the full manual for safe blade attachment and removal. Always ensure the saw is unplugged before performing any blade-related tasks.
2.2 Fastgørelse af saven
For stable and accurate operation, securely mount the miter saw to a workbench or a compatible miter saw stand. Ensure the mounting surface is level and capable of supporting the saw's weight and operational forces.
3. Betjeningsvejledning
The DEWALT DW715 is designed for precise cutting applications. Familiarize yourself with its controls and adjustments before making any cuts.
3.1 Power and Performance
The saw is powered by a 15 Amp motor, delivering a no-load speed of 4,000 revolutions per minute (rpm). This power is suitable for cutting framing lumber, molding, and other crosscutting and miter-cutting tasks.
3.2 Miter Angle Adjustments
The precise miter system features an adjustable stainless steel miter detent plate with 11 positive stops for common miter angles. To adjust the miter angle:
- Loosen the cam-lock miter handle.
- Rotate the turntable to the desired angle. The detent plate allows for quick stops at common angles.
- For angles between detents, use the detent override feature.
- Securely tighten the cam-lock miter handle to lock the angle in place.
The saw offers a wide miter capacity of 0 to 50 degrees to both the left and the right.
3.3 Bevel Angle Adjustments
The saw allows for bevel cuts with a capacity of 0 to 48 degrees to the left and 0 to 3 degrees to the right. Hardened steel bevel stops are provided at 0, 33.9, 45, and 48 degrees for quick and accurate settings.
3.4 Fence System
The tall sliding fence supports crown molding up to 5-1/4 inches nested vertically and base molding up to 6-1/2 inches vertically against the fence. For bevel cuts, the fence can be easily slid out of the way to accommodate the blade angle.
3.5 Skærekapacitet
The 12-inch blade allows for crosscuts through dimensional lumber up to 2x8 inches.
3.6 Bærbarhed
Weighing approximately 42 pounds, the DW715 features a built-in carry handle for convenient transport around the jobsite or for storage.
4. Vedligeholdelse
Regular maintenance ensures the longevity and optimal performance of your DEWALT DW715 miter saw.
4.1 Rengøring
After each use, disconnect the saw from power and clean sawdust and debris from the motor vents, blade guard, and table surface. The included dust bag should be emptied regularly to maintain efficient dust collection.
4.2 Pleje og udskiftning af knive
Periodically inspect the blade for sharpness and damage. A dull or damaged blade can lead to poor cut quality and increased motor strain. Use the provided blade wrench for safe blade replacement. Always use a 12-inch blade compatible with your saw's specifications.
5. Fejlfinding
This section addresses common issues you might encounter during the operation of your miter saw.
- Saven starter ikke: Ensure the power cord is securely plugged into a functional outlet. Check for tripped circuit breakers.
- Dårlig skærekvalitet (ru kanter, brændende brændemærker): The blade may be dull, dirty, or incorrect for the material being cut. Replace or clean the blade as necessary. Ensure the material is properly supported and clampudg.
- Unøjagtige snit: Verify that the miter and bevel scales are correctly set and locked. Check for any play in the saw's components or if the fence is misaligned. Calibration may be required.
- Overdreven vibration: Ensure the saw is securely mounted. Check if the blade is properly installed and not warped.
For issues not covered here, or if problems persist, contact DEWALT customer support or a qualified service technician.
6. Specifikationer
| Feature | Specifikation |
|---|---|
| Modelnummer | DW715 |
| Strømkilde | Elektrisk med ledning |
| Voltage | 120 volt |
| Ampslette | 15 Amps |
| Hastighed uden belastning | 4000 RPM |
| Bladets diameter | 12 tommer |
| Miter Capacity (Left/Right) | 0-50 grader |
| Bevel Capacity (Left/Right) | 0-48 degrees Left, 0-3 degrees Right |
| Varens vægt | 42 lbs (ca. 21.3 kg) |
| Produktdimensioner | 26.1 cm L x 19.6 cm B x 17.2 cm H |
| Bladmateriale | Stainless Steel (Carbide blade included) |
| Håndtag Materiale | Aluminium |
7. Garanti og support
Your DEWALT DW715 12-Inch Compound Miter Saw is backed by a comprehensive warranty package:
- 3-års begrænset garanti: Covers defects in materials or workmanship.
- 1-årig gratis servicekontrakt: Provides free maintenance for one year from the date of purchase.
- 90-dages pengene-tilbage-garanti: Allows for a full refund within 90 days if you are not completely satisfied.
For warranty claims, service, or technical support, please refer to the contact information provided with your product packaging or visit the official DEWALT webwebsted.
