Produkt overview
The Peerless ST630P Tilt Wall Mount is designed to securely hold flat panel displays ranging from 10 to 29 inches. This mount offers a discreet installation, keeping your display close to the wall, and features a one-touch tilt mechanism for easy angle adjustments.
Image: The Peerless ST630P Tilt Wall Mount, showcasing its black metal construction and VESA mounting plate.
Nøglefunktioner
- VESA 75mm and 100mm compatible
- One-touch tilt adjustment: +15° to -5° without tools
- Weight capacity: 80 lbs (36.3 kg)
- Ability to lock desired tilt angle
- Holdbar metalkonstruktion
Pakkens indhold
Kontroller, at alle komponenter er til stede, før installationen påbegyndes.
- Smartmount Universal 10"-29" Tilt Wall Mount
- Mounting Hardware Kit (various screws and adapters for display and wall mounting)
Opsætning og installation
Vigtige sikkerhedsoplysninger: Read all instructions before installation. If you have any doubts about your ability to safely install this mount, consult a qualified professional. Ensure the mounting surface can support the combined weight of the mount and the display.
Nødvendige værktøjer (ikke inkluderet)
- Phillips hovedskruetrækker
- Bore
- Stolpefinder (til montering af træstolper)
- Niveau
- Blyant
- Målebånd
Monteringsmuligheder
The ST630P mount can be installed on a single wood stud, concrete, or cinder block.
- Bestem monteringssted: Choose a location on the wall that is structurally sound and allows for optimal viewing. Use a stud finder to locate the center of a wood stud if mounting to wood.
- Marker borehuller: Hold the wall plate against the wall at the desired height and use a level to ensure it is straight. Mark the drill hole locations with a pencil.
- Bor pilothuller:
- For wood stud: Drill pilot holes according to the recommended size in the full instruction manual.
- For concrete/cinder block: Drill pilot holes and insert appropriate anchors.
- Fastgør vægplade: Secure the wall plate to the wall using the provided mounting hardware. Ensure it is firmly attached.
- Attach Display Brackets: Attach the VESA compatible brackets to the back of your display using the appropriate screws from the hardware kit. Ensure the brackets are centered and securely fastened.
- Monter skærm: Carefully lift the display and hook the brackets onto the wall plate. Ensure the display is securely seated on the mount.
- Juster hældning: Use the one-touch tilt mechanism to adjust the display to your desired viewing angle. The tilt can be adjusted from +15° to -5°.
- Lock Tilt (Optional): If a fixed tilt angle is desired, the mechanism allows for locking the tilt in place.
Billede: En eksample of the Peerless ST630P Tilt Wall Mount installed in a home setting, showcasing a display mounted above a bar area.
Betjeningsvejledning
The Peerless ST630P mount is designed for simple operation once installed.
Justering af hældningsvinkel
To adjust the vertical tilt of your display, simply grasp the top or bottom edge of the display and gently push or pull to achieve the desired angle. The one-touch tilt mechanism allows for smooth adjustment between +15 degrees (upward tilt) and -5 degrees (downward tilt) without the need for tools.
Locking Tilt Angle
For applications where a fixed tilt angle is preferred, the mount includes a feature to lock the display in position. Refer to the detailed installation guide for specific instructions on engaging the tilt lock mechanism.
Opretholdelse
The Peerless ST630P Tilt Wall Mount requires minimal maintenance.
- Periodically check all mounting screws and connections to ensure they remain secure.
- Rengør holderen med en blød, tør klud. Undgå slibende rengøringsmidler eller opløsningsmidler.
- Do not attempt to lubricate any moving parts.
Fejlfinding
If you encounter issues with your Peerless ST630P mount, refer to the following common solutions:
- Skærmen er ikke i vater: Ensure the wall plate was installed using a level. If not, carefully remove the display, loosen the wall plate screws, adjust, re-level, and re-tighten.
- Skærmen føles ustabil: Verify that all mounting hardware is securely tightened to both the wall and the display. Ensure the display's weight does not exceed the mount's 80 lbs capacity.
- Vanskeligheder med at justere hældningen: Check for any obstructions behind the display. Ensure the tilt locking mechanism (if engaged) is disengaged before attempting to adjust.
For further assistance, contact Peerless-AV customer support.
Specifikationer
| Attribut | Værdi |
|---|---|
| Model | ST630P |
| Mærke | Peerless-AV |
| Kompatible skærmstørrelser | 10 til 29 tommer |
| Vægt kapacitet | 80 lbs (36.3 kg) |
| VESA-kompatibilitet | 75 mm x 75 mm, 100 mm x 100 mm |
| Tilt justering | +15° / -5° |
| Monteringstype | Vægmontering |
| Materiale | Metal |
| Produktmål (L x B x H) | 6.6 x 6.2 x 2.23 tommer (16.8 x 15.7 x 5.7 cm) |
| Varens vægt | 1.65 pund (0.75 kg) |
Garantioplysninger
The Peerless ST630P Tilt Wall Mount comes with a 5 års begrænset garanti. Denne garanti dækker fejl i materialer og udførelse ved normal brug.
Vigtig: Garantien dækker ikke misbrug af produktet.
For full warranty terms and conditions, please refer to the official Peerless-AV webwebsted eller kontakt kundesupport.
Support og kontakt
For technical support, replacement parts, or further inquiries, please contact Peerless-AV customer service.
Webwebsted: www.peerless-av.com
Fabrikant: Uovertrufne industrier
