PROXIMITY RADAR MOTION SENSOR DEI 508D User Manual

1. Introduktion

The Phoenix DEI 508D Proximity Radar Motion Sensor is designed to enhance the security of your vehicle by detecting motion both inside and outside the vehicle. This dual-zone sensor provides an early warning system, triggering your car alarm upon detecting unauthorized proximity or intrusion. This manual provides detailed instructions for installation, operation, and maintenance to ensure optimal performance and longevity of your sensor.

2. Sikkerhedsoplysninger

• Always disconnect the vehicle's battery before beginning any electrical installation to prevent short circuits or electrical shock.
• Ensure all wiring connections are secure and properly insulated to prevent fire hazards or system malfunctions.
• Do not attempt to modify the sensor's internal components. Unauthorized modifications can void the warranty and pose safety risks.
• Consult a professional automotive technician if you are unsure about any installation steps.
• Keep the sensor away from excessive moisture, heat, and direct sunlight to prevent damage.

3. Pakkens indhold

Når du åbner pakken, skal du kontrollere, at alle komponenter er til stede og ubeskadigede:

• DEI 508D Proximity Radar Motion Sensor Unit
• Ledningsnet
• Installationsvejledning (denne manual)

Figure 3.1: The Phoenix DEI 508D Proximity Radar Motion Sensor shown in its clear retail packaging, displaying the main sensor unit with its green circuit board visible, and a bundled wiring harness with multiple colored wires (red, black, blue, green, purple) connected to a white connector. The packaging also features the 'Directed INSTALL essentials' logo and text indicating 'Dual Zone Motion Sensor' and 'Motion detector for the interior and exterior of your vehicle.'

4. Opsætning og installation

4.1 Tjekliste før installation

• Sørg for, at køretøjets batteri er frakoblet.
• Gather necessary tools: wire strippers, crimpers, electrical tape, zip ties, multimeter.
• Identify a suitable mounting location for the sensor.

4.2 Ledningsdiagram og tilslutninger

The DEI 508D sensor typically connects to your existing car alarm system. Refer to your car alarm's manual for specific input requirements. Common connections are:

• Rød ledning: +12V Constant Power. Connect to a fused constant 12V source.
• Sort ledning: Ground. Connect to a solid chassis ground point.
• Blå ledning: Zone 1 Output (Warn-Away). Connect to the alarm's warn-away or pre-warn input. This output is typically a negative pulse.
• Grøn ledning: Zone 2 Output (Full Trigger). Connect to the alarm's full trigger input. This output is typically a negative pulse.
• Lilla ledning: Ignition Input. Connect to a switched 12V source that is active when the ignition is ON. This wire is used to disable the sensor when the vehicle is running.

4.3 Montering af sensoren

Choose a central location within the vehicle's cabin, such as under the dashboard, center console, or behind the glove compartment. The sensor should be mounted securely and away from direct metal obstructions that could interfere with its radar field. Ensure the sensor is level and not obstructed by large metal objects or wiring harnesses.

• Use zip ties or double-sided automotive tape to secure the sensor firmly.
• Avoid mounting near large speakers or other devices that emit strong electromagnetic fields.
• Test the sensor's coverage after mounting to ensure optimal detection zones.

5. Betjeningsvejledning

The DEI 508D sensor operates automatically once properly installed and connected to your car alarm system. It creates two distinct detection zones: an outer

Relaterede dokumenter - DEI-508D

	Brugsanvisning til elektronisk lås i Phoenix DS2500E-serien Omfattende betjeningsvejledning til den elektroniske lås i Phoenix DS2500E-serien, der dækker opsætning, kodehåndtering, dobbeltstyring, alarmfunktioner og batteriudskiftning.
	Phoenix-løsning LGR-ydeevne AmpLifier brugermanual og installationsvejledning Brugermanual, installations-, betjenings- og servicevejledning til Therma-Stor Phoenix Solution LGR Performance AmpLifier (PN 4026600). Lær om dens specifikationer, opsætning, vedligeholdelse og garanti.
	Brugermanual og servicevejledning til Phoenix 250 MAX LGR affugter Omfattende brugermanual til Phoenix 250 MAX LGR affugteren fra Therma-Stor. Dækker installation, betjening, vedligeholdelse, fejlfinding, specifikationer og garanti for dette højkapacitets restaureringsudstyr.
	Phoenix-løsning LGR-ydeevne Ampinstruktionsbog til lifier Brugermanual til Therma-Stor Phoenix Solution LGR Performance Amplifier, der dækker installation, betjening, service, specifikationer, fejlfinding og garantioplysninger.
	Phoenix 200 MAX LGR Affugter brugermanual: Installations-, drifts- og servicevejledning Omfattende brugermanual til Phoenix 200 MAX LGR højkapacitetsaffugteren, der dækker installation, betjening, vedligeholdelse, fejlfinding og garantioplysninger fra Therma-Stor.
	Brugermanual til Phoenix 200 HT LGR affugter | Installation, betjening, service Omfattende brugermanual til Phoenix 200 HT LGR affugteren fra Therma-Stor. Dækker specifikationer, betjening, vedligeholdelse, fejlfinding, service, reservedele og garanti for dette højtydende restaureringsudstyr.