Indledning
This instruction manual provides detailed guidance for the assembly, operation, and maintenance of your Piko 62019 G Furniture Werke Franz Huber model kit. This highly detailed model is designed for G scale model railway layouts and is suitable for both indoor and outdoor use due to its weather-resistant properties. Please read all instructions carefully before beginning assembly.
Anbefalet alder: 14 år og opefter.
Produkt overview
Billede: The Piko 62019 G Furniture Werke Franz Huber model kit, featuring a multi-story factory building with a prominent chimney and water tower, alongside a G scale train and associated railway infrastructure. The scene depicts a bustling industrial setting, highlighting the intricate details of the model structure and its integration into a railway environment.
The Piko 62019 is a meticulously designed model kit representing a furniture factory, "Werke Franz Huber," intended for G scale model railway enthusiasts. This kit allows for the creation of a realistic industrial building that enhances any G scale layout. Its robust construction ensures durability, and its weather-resistant design makes it suitable for both indoor and outdoor display.
Pakkens indhold
Before beginning assembly, please verify that all components are present and undamaged. Refer to the parts list diagram (not provided in this digital format, typically found in the physical kit) to identify each piece.
- All plastic molded parts for the factory building structure.
- Klare plastikplader til vinduer.
- Decal sheet for signage and details.
- Samlingsvejledning (denne manual).
- Note: Adhesives and paints are not included and must be purchased separately.
Opsætning og montering
Assembly of the Piko 62019 model kit requires careful attention to detail. It is recommended to work on a clean, well-lit surface.
Nødvendige værktøjer og materialer (medfølger ikke):
- Plastmodelcement (f.eks. polystyrencement)
- Hobbykniv eller sprue-skærere
- Lille files or sandpaper for deburring
- Tweezers for small parts
- Paints (optional, for detailing)
- Small brushes (optional, for painting)
Monteringstrin:
- Forberedelse: Carefully remove all parts from the sprues using sprue cutters or a hobby knife. Clean any excess plastic (flash) with a hobby knife or fine sandpaper.
- Vægmontering: Begin by assembling the main wall sections. Ensure proper alignment before applying cement. Hold parts firmly together until the cement sets.
- Vindue- og dørinstallation: Insert clear plastic sheets into window frames from the inside. Attach door frames and doors as indicated in the diagrams.
- Roof and Chimney: Assemble the roof sections, ensuring a snug fit. Attach the chimney and any other roof details.
- Detaljer: Apply decals as per the provided diagram for signage and architectural details. Allow decals to dry completely.
- Afsluttende samling: Join all major sub-assemblies (e.g., main building, annexes, water tower) to form the complete structure.
- Placering: Once fully assembled and dry, the model can be placed on your G scale layout. Ensure the base is level for stability.
Driftsmæssige overvejelser
The Piko 62019 is a static model building and does not have operational components. Its primary function is to enhance the realism and aesthetic appeal of your G scale model railway layout.
- Integration: Position the factory building strategically on your layout to complement railway tracks, roads, and other scenery elements.
- Lighting (Optional): The model is designed to allow for internal lighting. If you wish to illuminate the building, install miniature LED lights or grain-of-wheat bulbs (not included) during assembly, routing wires discreetly. Consult a qualified electrician if unsure about wiring.
- Figures and Vehicles: Enhance the scene by adding G scale figures and vehicles around the factory to depict daily operations and activity.
Opretholdelse
Proper maintenance will ensure the longevity and appearance of your Piko 62019 model.
- Rensning: Støv modellen regelmæssigt af med en blød børste eller en dåse trykluft. Tør genstridigt snavs forsigtigt af med en børste.amp en klud og en mild sæbe, og tør derefter straks. Undgå skrappe kemikalier eller slibende rengøringsmidler.
- Udendørs brug: While weather-resistant, prolonged exposure to extreme weather conditions (e.g., direct sunlight, heavy rain, snow, freezing temperatures) can affect the model over time. Consider bringing the model indoors during harsh weather or providing additional protection.
- Reparationer: If parts become detached or damaged, use plastic model cement to reattach them. Small chips or scratches can be touched up with appropriate model paints.
Fejlfinding
This section addresses common issues that may arise during or after assembly.
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Parts do not fit together properly. | Excess plastic (flash) on parts; misalignment during assembly; incorrect part selection. | Carefully trim flash with a hobby knife. Ensure parts are correctly oriented before cementing. Double-check part numbers against the assembly diagrams. |
| Cement does not hold parts. | Insufficient cement applied; incorrect type of cement used; parts not held long enough. | Apply a thin, even coat of plastic model cement. Ensure you are using cement specifically for polystyrene plastic. Hold parts firmly for the recommended drying time. |
| Model appears unstable on layout. | Uneven base surface; parts not fully seated during assembly. | Ensure the surface where the model is placed is level. Re-check all major joints for proper seating. Consider adding weight to the base if necessary (e.g., small lead weights, sand). |
| Decals do not adhere or wrinkle. | Surface not clean; improper application technique; air bubbles trapped. | Ensure the surface is clean and smooth. Follow decal application instructions carefully, using water and a soft brush to position and remove air bubbles. Consider using decal setting solution. |
Specifikationer
| Feature | Detalje |
|---|---|
| Produktnavn | Piko G Furniture Werke Franz Huber |
| Modelnummer | 62019 |
| Skala | G Scale (Garden Railway) |
| Produkttype | Model Kit (Building Structure) |
| Materiale | Holdbar plastik |
| Vejrbestandighed | Yes, suitable for indoor or outdoor use |
| Anbefalet alder | 14 years and up (as per product description) |
| Omtrentlig varevægt | 10.56 pund (4.79 kg) |
| ASIN | B00092CXOU |
| Fabrikant | Piko |
| Udgivelsesdato | 1. april 2016 |
Garanti og support
Piko products are manufactured to high quality standards. For specific warranty information or technical support regarding your Piko 62019 model kit, please refer to the official Piko webwebstedet eller kontakt deres kundeservice direkte. Gem din købsbevis til eventuelle garantikrav.
Fabrikant: Piko
For further assistance, please visit the official Piko webwebstedet eller kontakt deres kundesupportkanaler.
