Indledning
This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Liebherr GNP 3376 freestanding vertical freezer. Please read these instructions carefully before using the appliance and retain them for future reference.
Image: The Liebherr GNP 3376 freestanding vertical freezer, depicted with its door open, revealing several transparent storage drawers. These drawers are filled with various frozen food items, illustrating the appliance's storage capacity and organization.
Sikkerhedsinstruktioner
Overhold altid følgende sikkerhedsforanstaltninger for at forhindre personskade eller skade på apparatet:
- Sørg for, at apparatet er korrekt jordforbundet, før du tilslutter det til strømmen.
- Beskadig ikke kølemiddelkredsløbet. Hvis der opstår skader, skal du undgå åben ild og udlufte rummet.
- Hold ventilationsåbninger fri af forhindringer.
- Brug ikke mekaniske anordninger eller andre midler til at fremskynde afrimningsprocessen, ud over dem, der anbefales af producenten.
- Opbevar ikke eksplosive stoffer såsom spraydåser med et brændbart drivmiddel i dette apparat.
- Dette apparat er kun beregnet til husholdningsbrug.
- Tag stikket ud af stikkontakten før rengøring eller vedligeholdelse.
Opsætning
1. Udpakning
Carefully remove all packaging materials. Inspect the appliance for any transport damage. Report any damage immediately to your supplier.
2. Placering
Place the freezer on a firm, level surface away from direct sunlight, heat sources (e.g., radiators, ovens), and areas of high humidity. Ensure adequate ventilation around the appliance. Maintain a minimum clearance of 5 cm from walls and other appliances.
3. Elektrisk tilslutning
Connect the appliance to a dedicated, properly grounded electrical outlet. The voltage (2.3E+2 VAC) must match the rating on the appliance's data plate. Do not use extension cords or multiple socket adapters.
4. Dørvending
The door hinge is reversible. If you wish to change the door opening direction, refer to the detailed instructions provided in the separate door reversal kit or consult a qualified technician. This process typically involves relocating hinges and handles.
Drift
1. Initial Start-up and Temperature Control
After connecting the appliance, allow it to stand for at least 4 hours before switching it on. This allows the refrigerant to settle. Switch on the freezer using the power button. Set the desired temperature using the control panel. The recommended temperature for freezing is -18°C (0°F).
2. Retningslinjer for opbevaring
Organize food items in the drawers to allow for proper air circulation. Avoid overloading drawers. For optimal freezing, place fresh food in the top drawers or designated fast-freeze compartment if available. Label and date all frozen items.
3. Freezing Fresh Food
To freeze fresh food, activate the SuperFrost function (if available) approximately 24 hours before placing the food in the freezer. This rapidly lowers the temperature, preserving vitamins and flavor. Once the food is frozen, the function will automatically switch off.
Opretholdelse
1. Rensning
Regularly clean the interior and exterior of the freezer. Disconnect the appliance from the power supply before cleaning. Use a soft cloth and a mild, non-abrasive cleaning solution. Do not use steam cleaners or abrasive agents. Dry all surfaces thoroughly.
2. Afrimning
This freezer features NoFrost technology, which prevents the formation of ice and frost, eliminating the need for manual defrosting. However, it is still recommended to periodically clean the interior and ensure air vents are clear.
3. Care of Door Seals
Inspect the door seals regularly for cleanliness and damage. Clean them with warm water and a mild detergent. A clean, intact seal ensures efficient operation and prevents cold air loss.
Fejlfinding
Før du kontakter kundeservice, bedes du se følgende tabel for almindelige problemer og løsninger på disse:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Fryseren køler ikke | No power; thermostat set too high; door not closed properly; excessive ice build-up. | Check power supply; adjust thermostat; ensure door is sealed; defrost if necessary (though NoFrost, check for obstructions). |
| Usædvanlige lyde | Appliance not level; objects vibrating inside; normal operating sounds (e.g., refrigerant flow). | Adjust leveling feet; reposition items; normal sounds are not a fault. |
| Døren lukker ikke ordentligt | Door gasket dirty or damaged; items obstructing closure. | Clean gasket; remove obstructions; replace damaged gasket. |
If the problem persists after attempting these solutions, please contact Liebherr customer service.
Specifikationer
- Mærke: Liebherr
- Modelnavn: BNI 3376
- Modelnummer: GNP3376-20
- ASIN: B0007TIS3U
- GTIN: 04016803096627
- Wattage: 245 kilowatt-hours (annual energy consumption)
- Voltage: 230 VAC
- Dørhængsel: Vendbar
- Første tilgængelige dato: 21. februar 2020
Garanti og support
For warranty information, please refer to the warranty card included with your appliance or visit the official Liebherr webwebsted. Gem din købsbevis til garantikrav.
For technical support, spare parts, or service requests, please contact Liebherr customer service. Have your model number (GNP3376-20) and serial number ready when contacting support.
You can find contact details on the Liebherr official webwebstedet eller i den dokumentation, der fulgte med dit apparat.
