Rectorseal EP-400 Epoxy Putty Instruction Manual

1. Produktet er slutview

The Rectorseal EP-400 Epoxy Putty is a high-grade, pre-measured epoxy and hardener system designed for various repairs. It comes in a convenient stick form, allowing users to easily break off the required amount for each application. This putty bonds effectively to most surfaces and begins to harden within 15 to 20 minutes, achieving a full cure in 24 hours. Once cured, it can be sanded, painted, drilled, taped, or machined, offering versatile repair solutions.

Image 1.1: Rectorseal EP-400 Epoxy Putty 4 oz stick. The packaging is red and gray, indicating the product name EP-400 and its net weight.

Nøglefunktioner:

• Pre-measured epoxy and hardener in a single stick.
• Bonds to a wide range of surfaces.
• Hardens in 15-20 minutes; full cure in 24 hours.
• Can be sanded, painted, drilled, taped, and machined after curing.
• Pressure tested to 1300 psi.
• Withstands continuous temperatures up to 500°F.
• Effective even when hardening underwater.
• Asbestos-free formulation.
• No specialized tools required for application.
• Certified to NSF/ANSI Standard 61, Annex G (for 4-Ounce size).

2. Sikkerhedsoplysninger

Always read and understand all safety warnings and instructions before using this product. Failure to do so may result in injury or property damage.

• Brug beskyttelseshandsker: Always use appropriate protective gloves (e.g., latex or nitrile) when handling and mixing the epoxy putty to prevent skin contact.
• Ventilation: Anvendes i et godt ventileret område.
• Øjenbeskyttelse: Wear safety glasses or goggles to protect eyes from splashes or contact.
• Hudkontakt: In case of skin contact, wash thoroughly with soap and water. If irritation persists, seek medical attention.
• Indtagelse: Må ikke indtages. Fremkald ikke opkastning ved indtagelse. Søg omgående lægehjælp.
• Opbevaring: Store in a cool, dry place, away from direct sunlight and out of reach of children and pets.
• Bortskaffelse: Dispose of cured material and packaging according to local regulations.

3. Preparation and Application

3.1 Overfladeforberedelse

For optimal adhesion, ensure the repair surface is clean, dry, and free from grease, oil, dirt, or loose debris. Lightly roughen smooth surfaces with sandpaper for better bonding.

3.2 Mixing the Putty

1. Cut or break off the desired amount of putty from the stick. It is recommended to work with smaller amounts for larger repairs to ensure workability before hardening.
2. Knead the putty thoroughly with your gloved hands until it reaches a uniform color (typically gray). The mixing process activates the epoxy and hardener. Warming the putty slightly can make it easier to knead.
3. The putty will become warm during mixing, indicating the chemical reaction is occurring.

3.3 Anvendelse

1. Immediately apply the mixed putty firmly to the repair area.
2. Press the putty into cracks, holes, or gaps, ensuring good contact with the surface. For filling larger voids, you may need to build up the putty in layers or use a backing material like wire mesh.
3. Shape and smooth the putty as needed before it begins to harden (within 15-20 minutes).

4. Curing and Finishing

4.1 Curing Time

• The putty will begin to harden within 15 to 20 minutes after mixing.
• Allow 24 hours for the putty to achieve its full cure strength. Avoid stressing the repaired area during this period.

4.2 Efterbehandling

Once fully cured, the Rectorseal EP-400 Epoxy Putty can be:

• Sanded to a smooth finish.
• Painted to match the surrounding surface.
• Drilled for fasteners or other attachments.
• Taped or machined as required for specific applications.

5. Specifikationer

6. Fejlfinding

• Putty not hardening: Ensure the putty was thoroughly kneaded until a uniform color was achieved. Incomplete mixing of the epoxy and hardener will prevent proper curing. Ensure ambient temperature is within recommended range for epoxy products (typically above 50°F/10°C).
• Poor adhesion: Verify that the surface was clean, dry, and free of contaminants (grease, oil, dust). Roughening smooth surfaces can significantly improve adhesion.
• Short working time: The putty has a working time of 15-20 minutes. Work quickly after mixing. For large repairs, mix smaller batches to manage working time effectively.

7. Garanti og support

Specific warranty information for the Rectorseal EP-400 Epoxy Putty is not provided within this manual. For details regarding product warranty, technical support, or further assistance, please contact Rectorseal directly through their official webwebsted eller kundeservicekanaler.

Manufacturer: The Rectorseal Corporation