Behringer TRUTH B2031A Studiemonitor Brugermanual

1. Introduktion

This manual provides essential information for the proper setup, operation, and maintenance of your Behringer TRUTH B2031A High-Resolution, Active 2-Way Reference Studio Monitor. Please read this manual thoroughly before using the product to ensure optimal performance and safety.

The Behringer TRUTH B2031A is designed to deliver a neutral sound with an extremely flat frequency response, making it suitable for critical listening environments such as recording studios and mixing rooms.

2. Vigtige sikkerhedsinstruktioner

Always follow these basic safety precautions when using your Behringer TRUTH B2031A monitor:

• Strømkilde: Tilslut kun enheden til den angivne strømforsyningsvolumen.tage.
• Ventilation: Sørg for tilstrækkelig ventilation. Bloker ikke ventilationsåbningerne.
• Vand og fugt: Udsæt ikke enheden for regn eller fugt. Placer ikke genstande fyldt med væsker oven på enheden.
• Varme: Hold enheden væk fra varmekilder såsom radiatorer, varmeregistreringsapparater, komfurer eller andre varmeproducerende apparater.
• Kabler: Beskyt strømledninger mod at blive trådt på eller klemt.
• Service: Forsøg ikke selv at servicere dette produkt. Overlad al service til kvalificeret servicepersonale.
• Rensning: Rengør kun med en tør klud.

3. Pakkens indhold

Ved udpakning skal du kontrollere, at alle komponenter er til stede og i god stand:

• Behringer TRUTH B2031A Studio Monitor unit
• Strømkabel
• Brugervejledning (dette dokument)

Hvis nogen dele mangler eller er beskadiget, bedes du straks kontakte din forhandler.

4. Produktet er slutview

The Behringer TRUTH B2031A is an active 2-way reference studio monitor featuring a high-resolution ferrofluid-cooled tweeter and a long-throw 8.75-inch woofer. It incorporates built-in 150-watt and 75-watt power amplifiers with independent limiters for low and high-frequency overload protection. The monitor is designed for precise sound reproduction across a frequency range of 50 Hz to 21 kHz.

Figur 4.1: Front view of the Behringer TRUTH B2031A Studio Monitor, showcasing the tweeter, woofer, and front-facing ports.

Nøglefunktioner:

• High-resolution ferrofluid-cooled tweeter for clear high frequencies.
• Long-throw 8.75-inch woofer for tight, deep bass response.
• Integrated 150-watt (LF) and 75-watt (HF) power amplivførere.
• Separately controlled limiters for low and high-frequency overload protection.
• Room Compensation EQ for adjusting to various acoustic environments.
• XLR and 1/4-inch TRS servo-balanced inputs for versatile connectivity.

5. Opsætning

5.1 Placering

Proper placement is crucial for optimal sound reproduction. Consider the following guidelines:

• Stereobilleddannelse: Position the monitors to form an equilateral triangle with your listening position.
• Afstand fra vægge: Avoid placing monitors directly against walls or in corners, as this can exaggerate bass frequencies. Utilize the Room Compensation EQ on the rear panel to adjust for room acoustics.
• Højde: The tweeters should ideally be at ear level when you are in your primary listening position.

Figur 5.1: Example setup of Behringer TRUTH B2031A Studio Monitors on stands in a room, demonstrating typical placement for a listening environment.

5.2 Forbindelser

The B2031A offers flexible input options:

• XLR-indgang: For balanced audio connections from professional audio interfaces, mixers, or preamplivførere.
• 1/4-inch TRS Input: Also for balanced audio connections, commonly used with audio interfaces or other studio equipment.

Ensure all audio connections are made before connecting the power cable.

5.3 Strømtilslutning

Connect the supplied power cable to the AC inlet on the rear of the monitor and then to a suitable power outlet. Ensure the monitor's power switch is in the OFF position before connecting to power.

6. Betjening

6.1 Indledende tænding

1. Sørg for, at alle lydforbindelser er sikre.
2. Turn the volume control on the monitor to its minimum setting.
3. Flip the power switch on the rear panel to the ON position. The power indicator on the front will illuminate.
4. Øg gradvist lydstyrken til det ønskede lytteniveau.

6.2 Adjusting Sound Characteristics

The B2031A features rear-panel controls to fine-tune its sound to your environment:

• Lydstyrkekontrol: Adjusts the overall output level of the monitor.
• Room Compensation EQ: This feature allows you to adapt the monitor's frequency response to your room's acoustics. Refer to the detailed instructions on the rear panel or a more comprehensive technical manual for specific settings based on monitor placement (e.g., free-standing, near wall, in corner).
• High and Low Frequency Adjustments: Dedicated controls for boosting or cutting high and low frequencies to further tailor the sound.

Experiment with these settings to achieve the most accurate and balanced sound in your listening space.

7. Vedligeholdelse

To ensure the longevity and optimal performance of your Behringer TRUTH B2031A monitors, follow these maintenance guidelines:

• Rensning: Brug en blød, tør klud til at rengøre de udvendige overflader. Undgå slibende rengøringsmidler, opløsningsmidler eller voks.
• Støv: Regularly dust the speaker grilles and ventilation openings to prevent dust buildup, which can affect performance and cooling.
• Opbevaring: If storing the monitors for an extended period, keep them in a dry, temperature-controlled environment, ideally in their original packaging.
• Undgå påvirkning: Protect the speaker cones and tweeters from physical impact.

8. Fejlfinding

If you encounter issues with your Behringer TRUTH B2031A, consult the following table for common problems and solutions:

If the problem persists, contact qualified service personnel or your dealer.

9. Tekniske specifikationer

10. Garanti og support

Behringer products are designed for reliability and performance. This product comes with a limited warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Behringer webwebsted.

For technical support, service, or spare parts, please contact your authorized Behringer dealer or visit the Behringer support page online. When contacting support, please have your product model number (B2031A) and serial number ready.

Online ressourcer:

• Behringer Service & Support
• Behringer Downloads (Manuals, Drivers)