Indledning
This manual provides instructions for the proper setup, operation, and maintenance of your Bianchi Accumold 7310 Mini Light Holder. This holder is designed to securely carry AA-cell lights, featuring durable construction and a versatile belt attachment system. Please read these instructions carefully before use to ensure optimal performance and longevity of your product.
Produktegenskaber
Figur 1: Bianchi Accumold 7310 Mini Light Holder. This image displays the black holder from the front, highlighting its compact design and the secure flap closure.
- AccuMold Trilaminate Construction: Features a ballistic weave exterior and Coptex lining for enhanced durability and protection.
- Secure Flap Closure: Equipped with a full flap and an exclusive Roll Top lid to firmly secure the light in position.
- Versatile Belt Loop: Dobbelt web belt loop design accommodates both 2 inch (50 mm) and 2.25 inch (58 mm) belt widths for flexible attachment.
- Kompatibilitet: Specifically designed to accommodate standard AA-cell lights.
- Closure Options: Available with either hook & loop or hidden snap enclosure for the flap.
Opsætning og installation
- Attaching to a Belt:
The light holder features a dual web belt loop. Thread your duty belt through the loops on the back of the holder. Ensure the belt is fully seated within both loops for a secure fit. This design is compatible with both 2 inch (50 mm) and 2.25 inch (58 mm) wide belts.
- Inserting the Light:
Open the top flap of the holder. Carefully insert your AA-cell light into the main compartment of the holder. Ensure the light is fully seated at the bottom of the holder.
- Sikring af lyset:
Close the top flap over the inserted light. The exclusive Roll Top lid design, combined with either the hook & loop or hidden snap closure, will secure the light firmly in place, preventing accidental dislodgement during activity.
Betjeningsvejledning
The Bianchi Accumold 7310 Mini Light Holder is designed for straightforward operation.
- To Access Your Light: Unfasten the top flap by disengaging the hook & loop or snap closure. Pull the flap upwards to retrieve your light.
- To Store Your Light: Place the AA-cell light into the holder and firmly close the top flap, ensuring the Roll Top lid engages with the closure mechanism to secure the light.
Opretholdelse
To ensure the longevity and continued performance of your Bianchi Accumold 7310 Mini Light Holder, follow these simple maintenance guidelines:
- Rensning: Tør det udvendige af med adamp cloth to remove dirt and debris. For more stubborn stains, a mild soap solution can be used, followed by rinsing with a damp cloth. Avoid harsh chemicals or abrasive cleaners, as these can damage the AccuMold material.
- Tørring: Allow the holder to air dry completely before storing or re-using. Do not expose to direct heat sources.
- Inspektion: Periodically inspect the belt loops, flap, and closure mechanism for any signs of wear or damage. If significant wear is observed, consider replacing the holder to ensure secure retention of your light.
Fejlfinding
| Spørgsmål | Mulig årsag | Løsning |
|---|---|---|
| Light does not fit securely. | Light is not an AA-cell size or is too large for the holder. | Ensure your light is an AA-cell type. This holder is designed for specific dimensions. |
| Holder feels loose on the belt. | Belt not properly threaded or belt width is incompatible. | Verify your belt is fully threaded through both loops. Ensure your belt width is either 2 inches (50 mm) or 2.25 inches (58 mm). |
| Flap closure is not secure. | Debris in hook & loop, or snap mechanism wear. | Clean any debris from the hook & loop fasteners. If using a snap, ensure it is fully engaged. If wear is significant, consider replacement. |
Specifikationer
| Mærke | BIANCHI |
| Modelnavn | Accumold 7310 Mini Light Holder |
| Varemodelnummer | 1016170 |
| Materiale | AccuMold Trilaminate (Ballistic Weave Exterior, Coptex Lining) |
| Farve | Sort |
| Produktdimensioner | 12.7 x 12.7 x 12.7 cm (5 x 5 x 5 tommer) |
| Varens vægt | 45.4 g (1.6 oz) |
| Belt Compatibility | 2 inch (50 mm) and 2.25 inch (58 mm) belts |
| Lukketype | Hook & Loop or Snap (model dependent) |
Garanti og support
For information regarding warranty coverage or product support, please refer to the official Bianchi webwebstedet eller kontakt deres kundeserviceafdeling direkte. Gem din købskvittering som købsbevis.
