C2G 29551

C2G 29551 4-ports VGA (UXGA) skærmsplitter/forlænger brugermanual

Model: 29551

Indledning

The C2G 29551 4-Port VGA (UXGA) Monitor Splitter/Extender is designed to distribute a single VGA video signal to up to four different video outputs while maintaining high picture quality. This device is ideal for applications requiring multiple displays from a single source, such as presentations, digital signage, or educational setups. It supports high-resolution video signals up to UXGA (1600 x 1200 pixels) and can extend the signal distance up to 210 feet. The splitter is easy to use, requiring no software installation or complex configuration.

Produkt overview

Top view of the C2G 4-Port VGA Splitter/Extender, a black rectangular device with the C2G logo on the front.

Figur 1: Øverst view of the C2G 4-Port VGA Splitter/Extender. This image shows the sleek, black metal housing of the device with the C2G branding visible on the top surface.

Bag view of the C2G 4-Port VGA Splitter/Extender showing one input port labeled 'Input' and four output ports labeled 'Out 1' through 'Out 4'.

Figur 2: Bagside view of the C2G 4-Port VGA Splitter/Extender. This image highlights the HD15 VGA input port and the four HD15 VGA output ports, clearly labeled for easy connection.

Pakkens indhold

  • C2G 4-Port VGA (UXGA) Monitor Splitter/Extender Unit
  • Strømadapter
  • Brugervejledning (dette dokument)

Opsætning og installation

  1. Sluk for enheder: Ensure all source devices (e.g., computer) and display devices (e.g., monitors) are powered off before making any connections.
  2. Forbind kilde: Connect one end of an HD15 Male to Female VGA cable (not included) to the VGA output port of your source device (e.g., computer). Connect the other end of this cable to the Input port on the C2G VGA Splitter/Extender.
  3. Tilslut skærme: Connect one end of up to four HD15 Male to Male VGA cables (not included) to the VGA input ports of your display devices (e.g., monitors). Connect the other end of these cables to the Ud 1, Ud 2, Ud 3, og Ud 4 ports on the C2G VGA Splitter/Extender.
  4. Tilslut strøm: Plug the included power adapter into the power input jack on the splitter unit. Then, plug the power adapter into a standard electrical outlet.
  5. Tænd enheder: Power on your display devices first, then power on your source device. The power and activity LED indicators on the splitter unit should illuminate.

Note: For optimal performance and to achieve the true potential resolution of this splitter, ensure all VGA cables used support UXGA resolution (1600 x 1200 pixels) or higher. The term "extender" refers to the product's ability to extend the distance of your cable runs up to 210 feet, not to provide "extended desktop" functionality where different information is displayed on each monitor.

Betjeningsvejledning

Once all connections are made and devices are powered on, the C2G 4-Port VGA Splitter/Extender will automatically duplicate the video signal from your source to all connected displays. No additional software or drivers are required for basic operation.

  • Signalfordeling: The splitter will mirror the source display across all connected monitors. All monitors will show the same content.
  • Opløsning: The splitter supports resolutions up to 1920 x 1440 pixels at 80 Hz. The output resolution will be determined by the source device and the capabilities of the connected displays.
  • Daisy-Chaining: Multiple units can be daisy-chained together to achieve more outputs. Connect an output from one splitter to the input of another splitter.

Opretholdelse

The C2G 4-Port VGA Splitter/Extender requires minimal maintenance. Follow these guidelines to ensure longevity:

  • Rensning: Brug en blød, tør klud til at rengøre enhedens yderside. Brug ikke flydende rengøringsmidler eller aerosolspray.
  • Ventilation: Sørg for, at enheden er placeret et godt ventileret område for at forhindre overophedning. Bloker ikke ventilationsåbninger.
  • Opbevaring: Når enheden ikke er i brug i længere perioder, skal den opbevares køligt og tørt, væk fra direkte sollys og ekstreme temperaturer.
  • Kabelstyring: Avoid bending or crimping cables excessively, as this can damage them and affect signal quality.

Fejlfinding

ProblemMulig årsagLøsning
Ingen videoudgang på skærmene.
  • Strømadapteren er ikke tilsluttet eller defekt.
  • Kablerne er løse eller forkert tilsluttet.
  • Source device or displays are off.
  • Forkert input valgt på displayet.
  • Ensure power adapter is securely connected and unit is receiving power (check LED indicators).
  • Verify all VGA cables are securely connected to both the splitter and the displays/source.
  • Ensure source device and all displays are powered on.
  • Check display settings and select the correct VGA input.
Poor video quality (ghosting, blurry image).
  • Low quality or damaged VGA cables.
  • Cable length exceeds recommended distance.
  • Resolution setting is too high for cables/displays.
  • Use high-quality UXGA-rated VGA cables.
  • Ensure total cable length does not exceed 210 feet.
  • Adjust the resolution on your source device to a lower setting to see if quality improves.
Only some displays show video.
  • Faulty output port on splitter.
  • Faulty cable to specific display.
  • Issue with the specific display.
  • Swap cables between working and non-working outputs to isolate the issue.
  • Test the problematic display with a different source or cable.

Specifikationer

FeatureDetalje
Modelnummer29551
MærkeC2G
Connector TypeVGA (HD15)
Input1 x HD15 Male
Produktion4 x HD15 Female
Maksimal opløsning1920 x 1440 pixels at 80 Hz (UXGA)
Video båndbredde350 MHz
Signal Extension DistanceOp til 210 fod (64 meter)
Power Adapter Current600 mA
Materiale til husMetal
FarveSort
Dimensioner (L x B x H)10 x 8 x 6 tommer (ca.)
Varens vægt1 pund
OverholdelseTAA-kompatibel

Garanti og support

For warranty information and technical support, please refer to the official C2G website or contact C2G customer service directly. Contact details are typically available on the manufacturer's webwebsted eller produktemballage.

Fabrikant: C2G
Webwebsted: www.c2g.com (This is a general placeholder, actual link might vary)

Relaterede dokumenter - 29551

Preview C2G HDMI HDBaseT + RS232 og IR over Cat Extender Box Sender til modtager - 4K 60Hz Brugermanual
Omfattende brugermanual til C2G HDMI HDBaseT + RS232 og IR over Cat Extender Box (model C2G30026), der dækker produkt overview, funktioner, installation, ledningsføring, sikkerhedsoplysninger og garanti.
Preview C2G 29973 Trådløs konferencerumsvideohub - HDMI og USB-C brugermanual
Brugermanual til C2G 29973 Wireless Conference Room Video Hub, der indeholder detaljerede instruktioner om opsætning, installation, betjening, fejlfinding, produktspecifikationer og firmwareopdateringer til problemfri trådløs HDMI- og USB-C-video- og lydtransmission.
Preview C2G USB-C Triple Display Dockingstation - 4K 60Hz
Omfattende guide til C2G USB-C Triple Display Docking Station (model C2G54535), med produkter overview, funktioner, pakkeindhold, installation, sikkerhed og garantioplysninger. Understøtter op til 4K-opløsning ved 60 Hz.
Preview C2G 1.8 m SCSI-2 MD50 M/M-kabel - Produktspecifikationer
Detaljerede specifikationer for det udgåede C2G 6ft (1.8m) SCSI-2 MD50 M/M-kabel (varenr. CG-03564), inklusive generelle oplysninger, dimensioner og tekniske detaljer.
Preview C2G 6 m ultrafleksibelt højhastigheds-HDMI-kabel - 4K 60Hz, Low Profile Stik (CG-41364)
Opdag C2G 1.8 m ultrafleksibelt højhastigheds-HDMI-kabel med lav profile Stik, der understøtter 4K 60Hz opløsning og HDMI 2.0-funktioner. Ideel til hjemmebiograf og desktop-applikationer.
Preview C2G 15 m premium højhastigheds HDMI-kabel - 4K 60Hz, CMG-klassificeret
Udforsk C2G 15 fod (4.6 m) Performance Series Premium High Speed ​​HDMI-kablet, der understøtter 4K 60 Hz opløsning, 18 Gbps båndbredde, HDR og dobbelte videostreams. Ideel til hjemmebiograf og digital skiltning.