Produkt overview
This manual provides essential information for the safe and effective use of the LENOX Bi-Metal Reciprocating Saw Blade, 8-inch, 10 TPI, 25-Pack (Model 20590B810R).
The LENOX Bi-Metal Reciprocating Saw Blades are engineered with T2 technology tooth design, which contributes to extended blade life and improved cutting performance on heavy materials. Their bi-metal construction ensures flexibility and resistance to breakage. These blades are designed to minimize friction and heat buildup, allowing them to cut through a wide variety of metal materials, as well as nail-embedded wood. The 10 teeth per inch (TPI) configuration is optimized for cutting thick metals, for metal demolition, and for fire and rescue applications.
Nøglefunktioner:
- Bi-metal construction: Allows blades to bend and flex without breaking, enhancing durability.
- 8% cobalt edge: Contributes to tough sharpness and extended blade life.
- Shatterproof precision-milled teeth: Ensures a more aggressive cut and high wear resistance.
- T2 Technology: Advanced tooth design for longer blade life and efficient cutting.
Opsætning og installation
Proper installation of the reciprocating saw blade is crucial for safety and optimal performance. Always refer to your reciprocating saw's instruction manual for specific blade installation procedures.
- Sikkerhed først: Ensure the reciprocating saw is unplugged or its battery is removed before attempting to install or remove any blade. Wear appropriate personal protective equipment, including safety glasses and gloves.
- Valg af klinge: Select the appropriate LENOX Bi-Metal Reciprocating Saw Blade (8-inch, 10 TPI) for your cutting application. This blade is suitable for thick metals, metal demolition, and nail-embedded wood.
- Klinge Clamp Mekanisme: Find bladkl.amp mechanism on your reciprocating saw. This mechanism typically involves a lever, button, or twist collar that opens the blade receiver.
- Indsæt blad: Insert the tang (the non-toothed end) of the LENOX blade fully into the saw's blade receiver. Ensure the blade is seated firmly and correctly.
- Sikker klinge: Slip bladet clamp mechanism to secure the blade in place. Gently pull on the blade to confirm it is locked and cannot be easily removed. A properly installed blade will not wobble or come loose during operation.
- Kontrol før operation: Before starting the saw, visually inspect the blade for any damage or misalignment. Ensure no debris is obstructing the blade or the blade clamp.
Figure 1: LENOX Bi-Metal Reciprocating Saw Blade (Model B810R). This image shows the full length of the 8-inch blade, highlighting its bi-metal construction and tooth design. The LENOX brand logo and "WOOD & METAL" designation are visible on the blade surface.
Betjeningsvejledning
These blades are designed for use with reciprocating saws. Always follow the safety guidelines and operating procedures provided by your reciprocating saw manufacturer.
- Personligt beskyttelsesudstyr (PPE): Always wear safety glasses, hearing protection, and work gloves when operating a reciprocating saw with this blade.
- Materiale kompatibilitet: This LENOX blade is optimized for cutting thick metals, metal demolition, and nail-embedded wood. Ensure the material you are cutting is compatible with the blade's specifications.
- Fastgørelse af emne: Secure the workpiece firmly to prevent movement during cutting. Use clamps, a vise, or other appropriate methods.
- Start af klipningen: Place the shoe of the reciprocating saw firmly against the workpiece. Start the saw before the blade makes contact with the material.
- Skæreteknik: Apply steady, consistent pressure. Allow the blade to do the work; do not force the cut. Maintain a firm grip on the saw. For optimal blade life and cutting efficiency, use a slight orbital motion if your saw supports it, or a rocking motion to engage more teeth.
- Varmestyring: If cutting metal, consider using cutting fluid to reduce heat buildup and extend blade life. The bi-metal construction of these blades is designed to minimize heat, but external cooling can further improve performance on demanding cuts.
- Afslutning af snittet: Reduce pressure as you near the end of the cut to prevent kickback. Ensure the blade has completely stopped before removing it from the workpiece.
Figur 2: Nærbillede view of the LENOX Bi-Metal Reciprocating Saw Blade's teeth. This image highlights the precision-milled teeth and the bi-metal construction, which contribute to the blade's cutting efficiency and durability.
Opretholdelse
Proper maintenance of your LENOX reciprocating saw blades will ensure their longevity and continued performance.
- Rensning: After each use, clean the blade to remove any accumulated debris, sawdust, or metal shavings. A stiff brush or compressed air can be used. Ensure the blade is dry before storage.
- Inspektion: Regularly inspect blades for signs of wear, damage, or dullness. Look for bent teeth, cracks, or excessive wear on the cutting edge. A dull blade will reduce cutting efficiency and can put undue strain on your saw.
- Opbevaring: Store blades in a dry environment to prevent rust. The original packaging or a dedicated blade storage case is recommended to protect the teeth from damage and to prevent accidental injury. Keep blades out of reach of children.
- Bortskaffelse: Dispose of worn or damaged blades responsibly according to local regulations. Dull blades can still be sharp enough to cause injury.
Fejlfinding
This section addresses common issues that may arise during the use of LENOX reciprocating saw blades.
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Blade not cutting efficiently or quickly. | Dull blade, incorrect blade for material, insufficient pressure, or saw speed too low. | Replace with a new LENOX blade. Ensure blade TPI matches material. Apply steady pressure. Adjust saw speed if applicable. |
| Blade bending or breaking. | Excessive force, cutting incompatible material, or blade overheating. | Reduce force. Ensure blade is suitable for material. Use cutting fluid for metal. Allow blade to cool. |
| Overdreven vibration eller støj. | Loose blade, damaged blade, or worn saw components. | Ensure blade is securely installed. Replace damaged blade. Inspect saw for issues. |
| Blade getting stuck in workpiece. | Workpiece not secured, blade binding due to kerf closing, or forcing the cut. | Secure workpiece. Use wedges if necessary to keep kerf open. Do not force the cut. |
Specifikationer
Detailed specifications for the LENOX Bi-Metal Reciprocating Saw Blade (Model B810R).
- Mærke: LENOX
- Modelnummer: B810R (Part Number: 20590B810R)
- Stil: 8-Inch, 10 TPI, 25-Pack
- Bladlængde: 8 tommer (200 mm)
- Tænder pr. tomme (TPI): 10
- Materiale: Bi-Metal (with 8% Cobalt Edge)
- Tykkelse: 0.05 tommer (1.27 mm)
- Kompatible materialer: Thick metals, metal demolition, nail-embedded wood, general wood, plastic.
- Pakkemængde: 25 blade pr. pakke
- Approximate Item Weight (per pack): 45.4 g
- Product Dimensions (packaging): Cirka 25 x 4.8 x 3 cm
- Fabrikant: Stanley Black og Decker
- UPC: 082472205909, 082472205589
Figure 3: Retail packaging for the LENOX Bi-Metal Reciprocating Saw Blade 25-Pack. The packaging displays key product information such as blade length, TPI, and quantity, along with the LENOX branding.
Garanti og support
For information regarding product warranty, technical support, or to inquire about specific applications, please contact LENOX customer service or visit their official webwebsted.
While specific warranty details are not provided in this manual, LENOX is known for manufacturing high-quality tools and accessories. Any claims regarding defects in material or workmanship should be directed to the manufacturer.
Fabrikant: Stanley Black og Decker
Forretningssted: East Longmeadow, MA 01028, US
For the most current support information, please refer to the official LENOX webhjemmeside eller kontakt deres kundeserviceafdeling direkte.
