Indledning
This manual provides detailed instructions for the operation and maintenance of your GPX FRS200 2-Mile 14-Channel FRS Two-Way Radio. Please read this manual thoroughly before using your device to ensure proper function and to maximize your communication experience.
Image of the GPX FRS200 2-Mile 14-Channel FRS Two-Way Radio, showing its silver casing, antenna, LCD screen displaying '14-00', and control buttons including FUNC, ENTER, LOCK, and CALL.
Produktegenskaber
- 14 kanaler: Provides access to 14 Family Radio Service (FRS) channels for clear communication.
- 38 Subcodes: Enhances privacy by allowing you to filter out unwanted conversations on the same channel.
- Easy Push-to-Talk Operation: Simple button press for instant communication.
- Opkaldsknap: Transmits an audible tone to alert other users on the same channel.
- 2-Mile Range: Offers communication up to 2 miles under ideal conditions. Actual range may vary based on terrain and obstructions.
- Baggrundsbelyst LCD: Provides clear visibility of channel and subcode information, especially in low-light conditions.
Pakkens indhold
Tjek venligst pakken for følgende varer:
- GPX FRS200 Two-Way Radio Unit
- Antenne
- Battery (Note: The product description indicates 4 AAA batteries are required for operation. Please refer to the product packaging for exact battery type and quantity included or required.)
- Brugervejledning (dette dokument)
Opsætning
1. Batteriinstallation
- Find batteridækslet på bagsiden af radioen.
- Skub eller afklips dækslet for at åbne rummet.
- Isæt fire (4) AAA-batterier, og sørg for korrekt polaritet (+/-) som angivet i batterirummet.
- Sæt dækslet til batterirummet på igen, og sørg for, at det klikker sikkert på plads.
Note: For optimal performance, use high-quality alkaline batteries. Rechargeable batteries may also be used, but their performance characteristics may differ.
2. Tænd/sluk
- For at tænde radioen skal du trykke på og holde MAGT button (or the designated power control) until the LCD screen illuminates.
- For at slukke radioen skal du trykke på og holde MAGT button again until the LCD screen turns off.
Betjeningsvejledning
1. Basic Communication (Push-to-Talk)
- Ensure both radios are powered on and set to the same channel and subcode.
- For at sende, tryk og hold nede PUSH-TO-TALK (PTT) button located on the side of the radio. Speak clearly into the microphone.
- Slip PTT knappen for at lytte efter et svar.
2. Kanalvalg
- Tryk på FUNK button once to enter channel selection mode. The channel number on the LCD will flash.
- Brug UP or NED buttons (often integrated with other controls) to select one of the 14 available FRS channels.
- Tryk på ENTER knappen for at bekræfte dit valg.
3. Subcode Selection (CTCSS/DCS)
- Når du har valgt en kanal, skal du trykke på FUNK button again to enter subcode selection mode. The subcode number on the LCD will flash.
- Brug UP or NED buttons to select one of the 38 available subcodes.
- Tryk på ENTER knappen for at bekræfte dit valg.
- Note: Both radios must be set to the same channel and subcode to communicate. Setting the subcode to '00' typically disables the subcode function.
4. Opkaldsknap
- Tryk på RING button to transmit a short, audible call tone to other radios tuned to the same channel and subcode. This alerts them to an incoming transmission.
5. Baggrundsbelyst LCD
- The LCD screen features a backlight for improved visibility. This function is often activated automatically when a button is pressed or can be manually toggled. Refer to the radio's specific button layout for backlight activation (e.g., a short press of the PTT button might activate it).
6. Tastaturlås
- To prevent accidental changes to settings, press the LÅSE button. The lock icon will appear on the LCD.
- For at låse op, tryk på LÅSE knappen igen.
Opretholdelse
- Rensning: Tør radioen af med en blød, damp klæde. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
- Batteripleje: Remove batteries if the radio will not be used for an extended period to prevent leakage. Dispose of used batteries responsibly.
- Opbevaring: Opbevar radioen et køligt, tørt sted væk fra direkte sollys og ekstreme temperaturer.
- Vandeksponering: Denne radio er ikke vandtæt. Undgå at udsætte den for regn, stænk eller nedsænkning i vand.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Ingen strøm | Døde eller forkert installerede batterier. | Check battery polarity. Replace batteries with fresh ones. |
| Kan ikke kommunikere med andre radioer | Radios on different channels or subcodes; out of range. | Ensure all radios are on the same channel and subcode. Move closer to the other radio. Check for obstructions. |
| Statisk eller dårlig lydkvalitet | Weak signal; interference; out of range. | Move to an open area. Reduce distance between radios. Check for sources of electrical interference. |
| Call button transmits static (as noted in product description) | Potential manufacturing inconsistency or specific unit issue. | If this issue persists, consider contacting customer support or the retailer. |
| Buttons are difficult to press or unresponsive | Fysisk obstruktion; indre problem. | Ensure no debris is lodged around buttons. If issue persists, contact customer support. |
Specifikationer
- Modelnummer: FRS200
- Kanaler: 14 FRS-kanaler
- Subcodes: 38 CTCSS/DCS Subcodes
- Rækkevidde: Up to 2 miles (under ideal conditions)
- Vise: Baggrundsbelyst LCD
- Tuner teknologi: UHF
- Strømkilde: 4 x AAA Batteries (not included, refer to packaging for exact details)
- Farve: Sort
- Varens vægt: Cirka 0.798 ounce (uden batterier)
- Pakkedimensioner: 8.9 x 5.8 x 1.8 tommer
- UPC: 047323002502
- Fabrikant: GPX
Garanti og support
For warranty information, please refer to the documentation included with your purchase or contact the retailer where the product was acquired. For technical support or service inquiries, please visit the official GPX webwebstedet eller kontakt deres kundeserviceafdeling direkte. Gem din købskvittering som købsbevis i tilfælde af garantikrav.
