Produkt overview
The Werner D1524-2 is an extra heavy-duty aluminum extension ladder designed for industrial use, featuring a 300-pound (Type IA) duty rating. It incorporates advanced design elements for stability, durability, and ease of use, including slip-resistant rungs, robust rail construction, and smooth operating locking mechanisms.

Figure 1: Werner D1524-2 24-foot extension ladder in its extended position.
Nøglefunktioner
- Mechanics Extension Flat D Rung: Features 1-3/4 inch flat-top rungs for comfortable and secure footing.
- Rail Design: Equipped with 3-inch stacked full I-beam rails for enhanced strength and rigidity.
- Alflo trinled: Werner's exclusive Alflo rung joint connection ensures twist-proof performance, enhancing ladder stability.

Figure 2: Detail of the Alflo rung joint, designed for twist-proof performance.
- Låsemekanisme: Includes free-sliding glides and die-cast aluminum spring-loaded gravity locks for secure extension.
- Rope and Pulleys: Featured on 20-foot and larger models for easy extension and retraction.

Figure 3: The rope and quick clip system for smooth ladder operation.
- Heavy-Duty Shoes with Shu-Lok: Rugged shoes provide stability, with the Shu-Lok feature allowing the shoe to rest flat or be held in a spur position.

Figure 4: The Shu-Lok feature on the ladder's foot, allowing for flat or spur positioning.
- Certificeringer: UL listed and labeled, meets OSHA standards, ensuring compliance with safety regulations.
Opsætning og drift
1. Inspektion før brug
Before each use, inspect the ladder for any damage, loose parts, or missing components. Ensure all rungs, rails, and locking mechanisms are in good working order. Verify that the rope and pulley system (if applicable) operates smoothly and is free from fraying or tangles.
2. Positioning the Ladder
- Place the ladder on a firm, level surface. Avoid soft ground, uneven terrain, or slippery surfaces.
- Ensure the ladder's feet are properly engaged with the ground. Utilize the Shu-Lok feature to adjust the shoe position for optimal grip.
- Maintain a safe angle: For every four feet of ladder height, the base should be one foot away from the wall or support structure.
- Ensure the top of the ladder extends at least three feet above the landing surface.
3. Extending the Ladder
For models 20 feet and larger, use the integrated rope and pulley system to extend the fly section. Pull the rope steadily to raise the upper section to the desired height. Ensure the spring-loaded gravity locks fully engage the rungs before climbing. Verify both locks are securely in place.
4. Retracting the Ladder
To retract, slightly extend the ladder to disengage the gravity locks, then carefully lower the fly section using the rope. Ensure hands and fingers are clear of moving parts to prevent pinching.
5. Safe Climbing Practices
- Vend altid mod stigen, når du stiger op eller ned.
- Maintain three points of contact (two hands and one foot, or two feet and one hand) at all times.
- Do not overreach; reposition the ladder as needed.
- Ensure only one person is on the ladder at a time.
- Do not use the ladder near electrical wires or in stormy conditions.
Opretholdelse
Regular maintenance ensures the longevity and safe operation of your Werner extension ladder.
- Rensning: Clean the ladder regularly with mild soap and water. Avoid harsh detergents or abrasive cleaners that could damage the aluminum finish or safety labels.
- Smøring: Periodically lubricate moving parts such as the pulley system and gravity locks with a silicone-based lubricant to ensure smooth operation.
- Opbevaring: Store the ladder in a dry, protected area, away from extreme temperatures and direct sunlight. Store horizontally on racks or vertically against a wall to prevent warping or damage.
- Rebinspektion: Regularly check the rope for any signs of wear, fraying, or damage. Replace the rope immediately if any damage is observed.
Fejlfinding
This section addresses common issues you might encounter with your extension ladder.
- Ladder Not Extending/Retracting Smoothly:
- Check for obstructions in the rail channels.
- Ensure the rope is not tangled or frayed.
- Lubricate the pulley system and glides.
- Gravity Locks Not Engaging:
- Ensure the ladder is fully extended to the next rung.
- Check for debris or damage preventing the locks from seating properly.
- Lubricate the lock mechanisms.
- Ladder Instability:
- Verify the ladder is placed on a firm, level surface.
- Adjust the Shu-Lok feet for proper ground contact.
- Ensure the ladder is set at the correct 4:1 angle.
Specifikationer
| Attribut | Detalje |
|---|---|
| Mærke | Werner |
| Modelnummer | D1524-2 |
| Størrelse | 24 fod |
| Materiale | Aluminium |
| Belastningskapacitet | 300 lbs (Type IA Industrial Duty Rating) |
| Varens vægt | 44 pund |
| Maksimal højde | 288 Inches (24 feet) |
| Antal trin | 28 |
| Certificeringer | UL Listed and Labeled, Meets OSHA Standards |
| UPC | 094703434194, 051751012330 |
Garanti og support
This Werner extension ladder comes with a manufacturer's warranty. For specific warranty details, claims, or technical support, please refer to the documentation included with your product or visit the official Werner webwebsted.
For kundesupporthenvendelser, besøg venligst produktside på Amazon or contact Werner directly.





