1. Introduktion
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your 6L Instant Tankless LPG Water Heater, Model JSD10. Please read this manual thoroughly before installation and use, and keep it for future reference.
Figur 1: Forside view of the JSD10 Water Heater
2. Sikkerhedsoplysninger
ADVARSEL: Forkert installation, justering, ændring, service eller vedligeholdelse kan forårsage skade på ejendom, personskade eller død. Læs installations-, betjenings- og vedligeholdelsesinstruktionerne grundigt, før du installerer eller servicerer dette udstyr.
- This appliance uses Liquefied Petroleum Gas (LPG). Ensure proper ventilation and gas connections are made by a qualified professional.
- DO NOT install this appliance in an enclosed room. As indicated by the product design, it is intended for outdoor use or in a well-ventilated area to prevent carbon monoxide buildup.
- Ensure all gas and water connections are leak-free before operation.
- Hold brændbare materialer væk fra vandvarmeren.
- Do not obstruct the flue exhaust.
- Børn skal være under opsyn for at sikre, at de ikke leger med apparatet.
Figur 2: Side view highlighting ventilation requirements
3. Pakkens indhold
Kontroller, at alle komponenter er til stede og ubeskadigede ved udpakning:
- 1 x 6L Instant Tankless LPG Water Heater (JSD10)
- 1 x Mounting Hook Kit
- Brugervejledning (dette dokument)
- Necessary fittings for gas and water connections (may vary by package)
4. Specifikationer
| Feature | Specifikation |
|---|---|
| Model | JSD10 |
| Bind | 6 liter |
| Brændstoftype | LPG (flydende gas) |
| Fast type | Krog |
| Installationssted | Outdoor or well-ventilated area (Flue Type exhaust) |
| Voltage | 3V (for ignition/display, typically battery-powered) |
| Vandtryk | 0.02~0.8 Mpa |
| Energibesparelsesfunktion | Winter-Summer Mode |
| Advantage | Instant Water Heating |
| Brug | Shower Hot Water |
| Dimensioner (L x B x H) | 43 cm x 34 cm x 45 cm |
| Vægt | 12.0 kg |
5. Opsætning og installation
Installation should only be performed by a qualified and licensed professional in accordance with local codes and regulations.
5.1. Placeringsvalg
- Choose an outdoor location or a well-ventilated area where the flue exhaust can safely dissipate combustion gases.
- Ensure the mounting surface is sturdy enough to support the water heater's weight (12.0 kg).
- Maintain adequate clearance around the unit for ventilation and servicing.
5.2. Montering
- Use the provided hook kit to securely mount the water heater to the chosen surface.
- Sørg for, at enheden er i vater.
5.3. Gastilslutning
- Connect the LPG supply line to the gas inlet on the water heater.
- Use appropriate gas-rated fittings and sealant.
- Perform a leak test on all gas connections using a soapy water solution.
5.4. Vandtilslutninger
- Tilslut koldtvandstilløbet til den dertil beregnede port på vandvarmeren.
- Tilslut varmtvandsudløbet til dit VVS-system.
- Ensure all water connections are tight and leak-free.
5.5. Flue Exhaust Installation
- Install the flue exhaust system according to local building codes and manufacturer instructions.
- Ensure the flue is clear of obstructions and extends sufficiently to safely vent combustion gases.
5.6. Batteriinstallation
- Locate the battery compartment (usually at the bottom or side of the unit).
- Insert two D-cell batteries (3V total) for ignition and digital display power. Ensure correct polarity.
6. Betjeningsvejledning
6.1. Indledende opstart
- Åbn hovedgasforsyningsventilen.
- Open a hot water tap in your home. The water heater should automatically ignite and begin heating water.
- Det digitale display viser den aktuelle vandtemperatur.
6.2. Justering af vandtemperatur
- Gaskontrolknap: Adjusts the gas flow to the burner, influencing the heat output. Turn towards 'Max' for hotter water, 'Min' for cooler.
- Water Control Knob: Adjusts the water flow rate. Lower flow rates generally result in hotter water, while higher flow rates result in cooler water.
6.3. Winter/Summer Mode
- The unit features a 'Winter-Summer Mode' switch.
- Select 'Winter' mode for higher heat output during colder months.
- Select 'Summer' mode for reduced heat output, saving energy when ambient water temperature is higher.
6.4. Nedlukning
- To turn off the water heater, simply close all hot water taps. The unit will automatically shut down.
- For extended periods of non-use, close the main gas supply valve and drain the water heater to prevent freezing in cold climates.
7. Vedligeholdelse
Regelmæssig vedligeholdelse sikrer optimal ydeevne og levetid for din vandvarmer.
- Årlig inspektion: Have a qualified technician inspect the unit annually, including gas connections, water lines, and the flue system.
- Rent ydre: Tør ydersiden af med en blød, damp klæde. Brug ikke slibende rengøringsmidler.
- Tjek for lækager: Periodically check gas and water connections for any signs of leaks.
- Flue Inspection: Ensure the flue exhaust is free from blockages (e.g., bird nests, debris).
- Afkalkning: In areas with hard water, periodic descaling may be necessary to prevent mineral buildup. Consult a professional for this service.
- Udskiftning af batteri: Replace the D-cell batteries when the digital display dims or ignition becomes inconsistent.
8. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Intet varmt vand | No gas supply, low water pressure, dead batteries, ignition failure | Check gas valve, ensure adequate water flow (0.02-0.8 Mpa), replace batteries, check ignition electrodes. |
| Vand ikke varmt nok | Gas/water control settings, high water flow, Summer mode selected in cold weather | Adjust Gas Control to Max, Water Control to Min, switch to Winter mode if applicable. |
| Unit does not ignite | No water flow, low water pressure, dead batteries, gas supply off | Ensure water tap is open, check water pressure, replace batteries, open gas supply. |
| Lugt af gas | Gaslækage | Immediately shut off gas supply, ventilate the area, and contact a qualified technician. Do not operate the unit. |
9. Brugertips
- For optimal performance, ensure your LPG tank has sufficient gas pressure.
- In very cold weather, consider insulating exposed water pipes to prevent freezing.
- Always use the Winter/Summer mode to match the season for better energy efficiency.
10. Garanti og support
This product comes with a standard manufacturer's warranty against defects in materials and workmanship. For specific warranty terms, duration, and to obtain support, please contact your point of purchase or the manufacturer directly. Keep your purchase receipt as proof of purchase.
