Indledning
The PRUVEEO HWK-08 Smart ACC Hardwire Kit is designed to provide a stable and continuous power supply to your dash camera and other 12V-30V devices. This kit features intelligent voltage regulation, ACC detection technology for automatic mode switching, and a low voltage cutoff function to protect your vehicle's battery. It ensures consistent performance for 4K dash cams and enables 24-hour parking monitoring.
Sikkerhedsoplysninger
- Always ensure the vehicle's ignition is off before beginning installation.
- Incorrect wiring can damage your vehicle's electrical system or the device. If unsure, consult a professional.
- Do not expose the hardwire kit to moisture or extreme temperatures.
- Sørg for, at alle forbindelser er sikre for at forhindre kortslutninger.
- Only use the provided fuse taps and ensure they are correctly sized for your vehicle's fuse box.
Pakkens indhold
The PRUVEEO HWK-08 Smart ACC Hardwire Kit typically includes the following components:
- PRUVEEO HWK-08 Hardwire Kit with integrated control box
- Various fuse taps (for different fuse types)
- Wiring harness (Yellow, Red, Black wires)
- USB output cable (Type-C and Mini USB ports)
- Pry tool for trim removal
Specifikationer
| Feature | Specifikation |
|---|---|
| Model | HWK-08 |
| Input bindtage | DC 12V - 30V |
| Udgang Voltage/Strøm | DC 5V / 3.0A |
| Lav voltage Afskærmningsbeskyttelse | Adjustable from 11V - 13V (Default: 11.5V, 11.8V, 12V) |
| Udgangsporte | Type-C and Mini USB |
| Trådforbindelser | Yellow (BAT+), Black (GND-), Red (ACC) |
| Frames Per Second (Dash Cam) | 25 (when used with compatible dash cams) |
| Samlingstilstand | Bærbar optager |
| Varetype | Bil DVR |
Opsætning og installation
Follow these steps carefully to install your PRUVEEO HWK-08 Hardwire Kit:
1. Identify Fuse Box Location
Locate your vehicle's fuse box. It is often found under the dashboard, near the steering column, or in the engine bay. Some fuse boxes may be located next to the B-pillar. Refer to your vehicle's owner's manual for the exact location.
2. Ledningstilslutning
The hardwire kit has three wires that need to be connected to your vehicle's electrical system via the fuse box. It is crucial to plug them into the correct fuse slots.
- Yellow Wire (BAT+): Connect this to a constant 12V power source (a fuse that is always on, even when the ignition is off). This provides continuous power for parking monitoring.
- Red Wire (ACC): Connect this to an Accessory (ACC) power source (a fuse that is only on when the ignition is on). This allows the dash cam to switch between driving and parking modes.
- Sort ledning (GND-): Connect this to a metal part of the vehicle's chassis for a ground connection.
Use the provided fuse taps to connect the yellow and red wires to the appropriate fuse slots in your vehicle's fuse box. Ensure the fuse tap is inserted correctly and the original fuse is placed in the correct slot within the tap.
3. Adjusting Low Voltage Afskæring
The HWK-08 intelligently recognizes your vehicle's status. When the ignition is on, it powers your dash cam for driving mode recording. When the ignition is off, it automatically switches to parking mode, utilizing the continuous power from the BAT+ connection for 24-hour monitoring.
The HWK-08 features adjustable low voltage cutoff to protect your vehicle's battery. There are 3 default voltage values: 11.5V, 11.8V, and 12V. The low voltage value can be adjusted from 11V to 13V to match your vehicle's battery voltage. The manufacturer recommends 11.8V as the cut-off voltage.
- Press and hold any button on the control box for 3 seconds to turn on the LED display.
- Use the '+' or '-' buttons to adjust the desired cut-off voltage.
- After adjusting, press and hold any button again until the LED flashes 3 times. Your setting is now confirmed.
Betjeningsvejledning
ACC Detection Technology
The HWK-08 intelligently recognizes your vehicle's status. When the ignition is on, it powers your dash cam for driving mode recording. When the ignition is off, it automatically switches to parking mode, utilizing the continuous power from the BAT+ connection for 24-hour monitoring.
24-Hour Parking Monitoring
With the hardwire kit installed, your dash cam can continuously monitor your vehicle even when parked. This feature is essential for capturing incidents like hit-and-runs or vandalism while your vehicle is unattended. The low voltage cutoff ensures that your vehicle's battery is not drained below a safe level.
Fejlfinding
- No Power to Dash Cam:
- Check all wire connections (Yellow, Red, Black) for proper seating.
- Verify that the fuse taps are correctly installed and the original fuses are intact.
- Sørg for, at køretøjets batterivolumen ertage er over den indstillede lave lydstyrketage afskæring.
- Parking Mode Not Activating:
- Confirm the Red (ACC) wire is connected to a fuse that powers off with the ignition.
- Ensure the Yellow (BAT+) wire is connected to a constant power fuse.
- Vehicle Battery Drains Quickly:
- Check the set low voltage cutoff. A higher cutoff voltage will preserve more battery charge.
- Ensure your dash cam's parking mode settings (e.g., motion detection sensitivity, recording duration) are optimized.
Brugertips
Ingen specifikke brugertips fra reviews or Q&A were provided for this product. However, general tips for hardwire kits include:
- When routing cables, tuck them neatly along the vehicle's trim to avoid interference with airbags or other safety features.
- Test all connections before fully reassembling your vehicle's interior panels.
- Regularly check your vehicle's battery health, especially if using parking mode extensively.
Opretholdelse
- Keep the hardwire kit and its connections clean and free from dust or debris.
- Periodically inspect the wiring for any signs of wear or damage.
- Ensure the control box is not obstructed to allow for proper heat dissipation.
Garanti og support
For warranty information or technical support, please refer to the seller's contact information or the official PRUVEEO webwebstedet. Behold din købskvittering som købsbevis.
