1. Introduktion
The TAKSTAR MS-189 is a professional wired gooseneck condenser microphone designed for table conference and speech applications. It features a back electret condenser transducer, offering high sensitivity and low noise for clear and bright vocal pickup. The microphone includes an on/off button with an LED indicator on its base and gooseneck, providing easy control. It supports optional phantom power or battery operation, ensuring versatility in various setups. Its robust design ensures excellent quality and low power consumption.
Figure 1: TAKSTAR MS-189 Table Conference Microphone
2. Hvad er der i æsken
Når du åbner pakken, skal du kontrollere, at alle følgende varer er inkluderet:
- Conference Microphone (1 PC)
- Brugervejledning (1 pc)
- Windscreen (1 PC)
- XLR Cable (1 PC)
Video 1: Unboxing the TAKSTAR MS-189 Microphone, showing all included components.
Figure 2: All components included in the TAKSTAR MS-189 package.
3. Opsætning
- Insert Batteries (Optional): If not using phantom power, open the battery compartment on the underside of the microphone base. Insert two 1.5V AA batteries, ensuring correct polarity. Close the compartment securely.
- Attach Gooseneck Microphone: Gently insert the gooseneck microphone into the XLR input on the top of the microphone base. Ensure it clicks into place firmly.
- Tilslut XLR-kabel: Connect one end of the provided XLR cable to the output port on the back of the microphone base. Connect the other end of the XLR cable to your audio mixer, amplifter eller optageenhed.
- Apply Windscreen: Place the foam windscreen over the microphone capsule at the top of the gooseneck to reduce plosives and wind noise.
Figure 3: Battery compartment on the microphone base.
Figure 4: Assembled microphone on its base.
Figure 5: XLR connectors for audio connection.
4. Betjeningsvejledning
- Tænd/sluk: Locate the ON/OFF switch on the microphone base. Slide the switch to the 'ON' position to activate the microphone. The LED indicator on the base and gooseneck will illuminate. Slide to 'OFF' when not in use.
- Juster svanehals: Position the flexible gooseneck to direct the microphone capsule towards the speaker's mouth. For optimal sound quality, maintain a distance of approximately 15-30cm (6-12 inches) from the speaker.
- Lydstyrkejustering: Adjust the input volume on your connected audio mixer or ampfor at opnå det ønskede lydniveau.
- Fantomkraft: If your mixer/amplifier provides 9-52V phantom power, the microphone will automatically draw power from it, and batteries are not required. Ensure phantom power is enabled on your audio device.
5. Vedligeholdelse
- Rensning: Use a soft, dry cloth to clean the microphone and its base. Do not use liquid cleaners or solvents.
- Opbevaring: Når mikrofonen ikke er i brug, skal den opbevares tørt og støvfrit.
- Udskiftning af batteri: If using batteries, replace them when the LED indicator dims or the sound quality deteriorates. Always use fresh, high-quality AA batteries.
- Undgå fugt: Keep the microphone away from water and high humidity to prevent damage.
6. Fejlfinding
- Ingen lydoutput:
- Check if the microphone is switched 'ON' and the LED indicator is lit.
- Verify that the XLR cable is securely connected to both the microphone base and the audio device.
- If using batteries, ensure they are correctly inserted and not depleted.
- If using phantom power, confirm it is enabled on your audio mixer/amplivligere.
- Check the volume levels on your audio device.
- Dårlig lydkvalitet / Forvrængning:
- Ensure the microphone is positioned correctly, not too close or too far from the speaker.
- Reduce the input gain on your audio device if the sound is distorted.
- Tjek for interferens fra andre elektroniske enheder.
- Udskift batterierne, hvis de er lave.
- Feedback (hylende lyd):
- Flyt mikrofonen længere væk fra højttalere eller skærme.
- Reducer den samlede lydstyrke eller mikrofonens inputforstærkning.
- Adjust the microphone's position to avoid pointing directly at speakers.
7. Specifikationer
| Feature | Beskrivelse |
|---|---|
| Transducerprincip | Elektret kondensator på bagsiden |
| Directivity Characteristic | Unidirektionel (kardioid) |
| Frekvensrespons | 100Hz-16kHz |
| Følsomhed | -33dB±3dB (0dB=1V/Pa ved 1kHz) |
| Udgangsimpedans | 340Ω±30% (ved 1kHz) |
| Belastningsimpedans | ≥1000Ω |
| Strømbehov | 9-52V phantom power or 2pcs 1.5V AA battery |
| Nettovægt | 500 g |
| Stil | Svanehals mikrofon |
| Meddelelse | Kablet |
| Bruge | Konferencemikrofon |
8. Brugertips
- For best results in a conference setting, ensure each speaker has their own microphone or is within the optimal pickup range of a shared microphone.
- Always turn off the microphone when not in use to conserve battery life, especially if not using phantom power.
- Experiment with microphone placement to find the sweet spot that minimizes background noise and maximizes vocal clarity for your specific environment.
9. Garanti og support
This product is covered by a manufacturer's warranty. For detailed warranty information, technical support, or service inquiries, please refer to the official Takstar webwebstedet eller kontakt din lokale autoriserede forhandler. Gem din købskvittering som købsbevis i tilfælde af garantikrav.
