ErGear Glass Standing Desk Brugermanual

Indledning

Thank you for choosing the ErGear Glass Standing Desk. This electric adjustable height desk features a durable tempered glass top, integrated storage drawer, and convenient USB charging ports, designed to enhance your workspace with both elegance and functionality. This manual provides essential information for the safe and efficient use of your new desk.

Opsætning

The ErGear Glass Standing Desk is designed for simple assembly. The glass top comes pre-assembled, significantly reducing setup time. Follow these general steps for assembly:

1. Carefully unpack all components and ensure all parts are present.
2. Attach the desk legs to the pre-assembled desktop frame.
3. Secure the feet to the bottom of the desk legs.
4. Connect the power cable and ensure all connections are secure.

Refer to the included assembly diagram for detailed instructions specific to your model.

Betjeningsvejledning

Højdejustering

Your ErGear standing desk features smooth electric height adjustment. Use the control panel located on the front edge of the desk to adjust the height.

• Op/ned-knapper (+/-): Press and hold the '+' button to raise the desk and the '-' button to lower it. Release the button at your desired height.
• Hukommelsesforudindstillinger (1, 2, 3): Save up to three preferred height settings. To save a height, adjust the desk to the desired level, then press 'M' followed by the number button (1, 2, or 3) you wish to assign. The desk will beep to confirm. To recall a saved height, simply press the corresponding number button.

USB-opladningsporte

The desk is equipped with two USB charging ports (Type-A and Type-C) on the control panel for convenient charging of your devices.

• Simply plug your device's charging cable into the appropriate USB port.
• Ensure the desk is powered on for the charging ports to function.

Opbevaringsskuffe

The integrated two-section drawer provides discreet storage for your office essentials, helping to keep your workspace tidy.

Opretholdelse

To ensure the longevity and optimal performance of your ErGear Glass Standing Desk, follow these maintenance guidelines:

• Rengøring af glaspladen: The tempered glass surface is easy to clean. Use a soft, damp cloth with a mild glass cleaner. Avoid abrasive cleaners or harsh chemicals that could damage the surface. For dry-erase functionality, use only dry-erase markers and wipe clean with a dry-erase eraser or soft cloth.
• Stel og ben: Wipe down the metal frame and legs with a soft, dry cloth to remove dust.
• Regelmæssig kontrol: Kontrollér regelmæssigt alle skruer og bolte for at sikre, at de er stramme. Efterspænd om nødvendigt.
• Undgå overbelastning: Do not exceed the maximum weight capacity of 110 lbs (50 kg) to prevent damage to the lifting mechanism.

Fejlfinding

If you encounter any issues with your ErGear Glass Standing Desk, please refer to the following common troubleshooting tips:

• Skrivebordet bevæger sig ikke: Check if the power cable is securely plugged into both the desk and the wall outlet. Ensure there are no obstructions under or around the desk that might impede its movement.
• Uneven Height: If the desk appears uneven, try resetting the system. Consult the full product manual for specific reset procedures, which typically involve holding down certain buttons for a few seconds.
• Fejlkoder: If the control panel displays an error code, unplug the desk for 10-15 minutes, then plug it back in. If the error persists, contact customer support.
• USB-porte oplader ikke: Verify the desk is powered on. Try a different USB cable or device to rule out issues with the cable or device itself.

For more complex issues or if troubleshooting steps do not resolve the problem, please contact ErGear customer support.

Specifikationer

Brugertips

• Utilize the Dry-Erase Surface: The tempered glass top doubles as a dry-erase board. Keep a dry-erase marker and eraser handy for quick notes, reminders, or brainstorming sessions directly on your desk.
• Optimize with Memory Presets: Program your ideal sitting and standing heights into the memory presets (1, 2, 3) for quick and effortless transitions throughout your workday.
• Hold det organiseret: Make full use of the integrated drawer to store pens, notebooks, and other small items, maintaining a clutter-free and productive workspace.
• Kabelstyring: Consider using cable ties or clips to manage power cords and charging cables, keeping them tidy and out of the way for a cleaner aesthetic and safer environment.

Garanti og support

ErGear products are designed for quality and durability. For warranty information, product support, or to report any issues, please contact ErGear customer service through the retailer where you purchased the product or visit the official ErGear website. Please have your model number (EGESD32) and purchase date available when contacting support.