1. Produktet er slutview
The JPT YDFLP-E series fiber laser source is a high-quality, versatile laser component designed for various industrial applications, primarily laser marking. Available in 20W, 30W, and 50W configurations, these sources offer stable output power and are air-cooled for efficient operation. They are certified with CE, FDA, and ROSH standards, ensuring reliability and safety.
2. Opsætningsvejledning
This section outlines the general steps for setting up your JPT Fiber Laser Source. Professional installation is recommended.
- Udpakning og inspektion: Carefully unpack all components. Verify that all items listed in your packing slip are present and undamaged. Report any discrepancies or damage immediately.
- Mounting the Laser Source: Securely mount the laser source unit within your laser marking machine's enclosure. Ensure adequate ventilation around the unit, especially near the cooling fans.
- Connecting the Laser Head: Connect the fiber optic cable from the laser source to the laser head (galvanometer scanner). Ensure the connection is clean and secure to prevent power loss or damage.
- Elektriske forbindelser: Connect the power supply unit to the laser source and the main power outlet. Ensure all electrical connections comply with local safety standards and the specified voltage requirements (24V DC for the laser source).
- Integration af kontrolsystem: Connect the laser source to your machine's control board (e.g., marking card) using the provided data cables. Refer to your specific machine's manual for detailed wiring diagrams.
- Software installation: Install the necessary laser control software on your computer. Configure the software according to the laser source specifications and your application requirements.
3. Betjeningsvejledning
Before operating the laser, ensure all safety precautions are understood and followed. Always wear appropriate laser safety eyewear.
3.1 Grundlæggende betjening
- Tænd: Turn on the main power switch for the laser marking machine.
- Software lancering: Launch the laser control software on your computer.
- Parameterindstilling: Load or create your marking design. Adjust laser parameters such as power, frequency, speed, and pulse duration according to the material and desired marking effect.
- Fokusjustering: Sørg for, at laseren er korrekt fokuseret på materialeoverfladen.
- Start markering: Initiate the marking process through the software. Monitor the process for any anomalies.
- Sluk: After use, exit the software, turn off the laser source, and then the main power switch.
3.2 Ansøgninger
The JPT YDFLP-E series is suitable for a wide range of applications:
- Scribing and Drilling
- Marking on the fly (dynamic marking)
- Sheet metal cutting and welding
- Laser derusting
- Overfladebehandling
- Metal surface processing and peeling coating
4. Vedligeholdelse
Regular maintenance ensures optimal performance and longevity of your laser source.
- Rensning: Periodically clean the exterior of the laser source and controller, especially the cooling fan vents, to prevent dust accumulation. Use a soft, dry cloth.
- Optical Path Inspection: Regularly inspect the laser head's protective lens for dust or damage. Clean with optical-grade wipes and solution if necessary.
- Kabelforbindelser: Ensure all electrical and fiber optic cable connections are secure and free from damage.
- Miljøforhold: Maintain the operating environment within specified temperature and humidity ranges to prevent condensation and overheating.
5. Fejlfinding
This section provides solutions to common issues. For complex problems, contact technical support.
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Ingen laserudgang | Power cable loose, emergency stop engaged, software error, laser source fault. | Check all power connections, release emergency stop, restart software/system, contact support. |
| Weak or inconsistent marking | Incorrect focus, dirty lens, low laser power setting, material issues. | Adjust focus, clean protective lens, increase laser power, test on different material. |
| Overophedning | Blocked cooling vents, high ambient temperature, fan malfunction. | Clean vents, ensure proper room temperature, check fan operation. |
| Software communication error | Data cable loose, incorrect driver, software conflict. | Check data cable connections, reinstall drivers, try different USB port. |
6. Specifikationer
Detailed specifications for the JPT YDFLP-E series fiber laser sources:
| Parameter | Enhed | YDFLP-E-20-LP-S | YDFLP-E-30-LP-S | YDFLP-E-50-LP-R |
|---|---|---|---|---|
| M² | < 1.5 | < 1.5 | < 1.8 | |
| Armored Cable Length | m | 2 | 2 | 3 |
| Normal Average Output Power | W | > 20 | > 30 | > 50 |
| Max puls energi | mJ | 0.8 | 0.8 | 1.25 |
| Pulsgentagelsesfrekvensområde | kHz | 1 ~ 600 | ||
| Puls Varighed | ns | 200 | ||
| Udgangseffektstabilitet | % | < 5 | ||
| Afkølingsmetode | Luftafkølet | |||
| Supply DC Voltage | V | 24 | ||
| Environmental Supply Current | A | > 5 | > 7 | > 10 |
| Max strømforbrug | W | < 110 | < 150 | < 220 |
| Center Emission Wavelength | nm | 1064 | ||
| Emissionsbåndbredde@3dB | nm | < 15 | ||
| Polarization Orientation | Tilfældig | |||
| Udgangsstrålediameter | mm | 7±0.5 | ||
| Udgangseffektjusteringsområde | % | 0 ~ 100 | ||
| Driftstemperatur | °C | 0 ~ 40 | ||
| Opbevaringstemperatur | °C | -10 ~ 60 | ||
| Nettovægt | KG | 3.75 | 4.25 | 8.2 |
| Størrelse (L×B×H) | mm | 245x200x65 | 245x200x65 | 325x260x75 |
7. Brugertips
- Materialetest: Always perform test markings on scrap material before processing your final workpiece to optimize parameters and ensure desired results.
- Ventilation: Ensure proper ventilation in your workspace to remove fumes and debris generated during laser processing.
- Almindelig kalibrering: Periodically check and calibrate your galvanometer scanner and focusing lens for consistent marking quality.
- Softwareopdateringer: Keep your laser control software updated to benefit from new features and bug fixes.
8. Garanti og support
This JPT Fiber Laser Source comes with a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to your purchase documentation or contact your supplier.
For technical assistance, troubleshooting beyond this manual, or spare parts inquiries, please contact the vendor or authorized service center. Provide your product model number and serial number for efficient support.