1. Produktet er slutview
This manual provides essential information for the safe and efficient operation of your Aninerel 6.2kW 48V Hybrid Solar Inverter and 51.2V 100AH Rack Mount LiFePO4 Battery System. This system is designed for home solar applications, offering reliable power conversion and energy storage.
The system includes a high-performance hybrid solar inverter and a durable LiFePO4 battery, capable of managing smart loads, supporting various output priorities, and offering remote monitoring via WiFi.
2. Nøglefunktioner
Inverter (ANL-6200T-48L-W-PRO) Features:
- Dobbelt output: For smart load management.
- Aktivering af litiumbatteri: Functionality via PV or Utility.
- Colored LCD with RGB Lights: For clear status indication.
- LiFePO4-batterikompatibilitet: Works seamlessly via RS485 communication.
- Høj PV-indgang: Up to 500Vdc Max.
- Built-in MPPT 120A: Efficient solar charging.
- Batterifri drift: Kan fungere uden batteri.
- Aftageligt støvdæksel: Designed for harsh environments.
- WIFI Remote Monitoring: For convenient system oversight.
- Understøttelse af flere outputprioriteter: UTL, SOL, SBU, SUB, SUF.
- EQ-funktion: Optimerer batteriets ydeevne og forlænger levetiden.
Battery (ANJ-48V-100AH-P) Features:
- Nominel bindtage: 51.2V
- Nominel kapacitet: 100 Ah (0.5 C)
- Kommunikationsprotokol: CAN RS485
- Built-in BMS: 16S 100A, supports up to 15 units in parallel.
- Energi: 5120Wh
- Lang cyklus levetid: >6000 cyklusser ved 0.2°C (80 % kapacitet ved levetidens udløb).
- Robust design: Metal case with IP21 water and dust resistance.
3. Opsætning og installation
Proper installation is crucial for the safety and optimal performance of your solar system. It is highly recommended that installation be performed by a qualified electrician or solar professional.
3.1 Systemapplikationsdiagram
The system integrates solar panels, utility grid, and a generator with the inverter and battery to power various household appliances.
3.2 Inverter Component Identification
Familiarize yourself with the inverter's ports and indicators before installation.
3.3 Battery Component Identification
Familiarize yourself with the battery's ports and indicators.
3.4 Retningslinjer for tilslutning af PV
When connecting PV modules, observe the following critical parameters:
- The Open Circuit Vol.tage (Voc) for PV-moduler må ikke overstige den maksimale PV-generators åbne kredsløbsvolumentage af inverteren.
- The Open Circuit Vol.tage (Voc) for PV-moduler bør være højere end batteriets minimumsvolumentage.
3.5 Batteritilslutning
Connect the battery to the inverter following the diagram and safety warnings. Ensure correct polarity.
ADVARSEL: Fare for stød! Installation skal udføres med omhu på grund af høj batterivolumentage i serie.
- Placer ikke genstande mellem den flade del af inverterterminalen. Ellers kan der opstå overophedning.
- Påfør ikke antioxidanter på terminalerne, før terminalerne er tæt forbundet.
- Før du laver den endelige DC-forbindelse eller lukker DC-afbryderen/afbryderen, skal du sikre dig, at positiv (+) skal forbindes til positiv (+) og negativ (-) skal være tilsluttet negativ (-).
3.6 Parallel Battery Connection (Optional)
The ANJ-48V-100AH-P battery supports up to 15 units in parallel to meet higher energy demands.
3.7 Inkluderet tilbehør
The product package typically includes the following accessories:
- Upper computer cable *1
- Strømkabel *2
- Communication cable *1
4. Betjening
Once installed, the system operates to convert solar energy and manage power flow to your home.
4.1 Power Flow
The inverter manages power from solar panels, the utility grid, and the battery to supply connected loads. Excess solar energy can be fed back into the grid, and utility power will supplement loads if solar energy is insufficient.
4.2 Overvågning og kontrol
The system features a built-in WiFi module for remote monitoring and control via a dedicated smartphone application. This allows you to check the status of your device from anywhere.
4.3 Indstillinger for udgangsprioritet
The inverter supports multiple output priorities, including UTL (Utility first), SOL (Solar first), SBU (Solar-Battery-Utility), SUB (Solar-Utility-Battery), and SUF (Solar-Utility-Feed-in). Refer to the inverter's display or app for configuration options.
5. Vedligeholdelse
Regular maintenance ensures the longevity and efficiency of your solar system.
- Visuel inspektion: Periodically check all connections for corrosion, damage, or loose wiring.
- Rensning: Keep the inverter and battery free from dust and debris. The inverter has a detachable dust cover for easier cleaning in harsh environments.
- Batteriets sundhed: Monitor battery performance via the LCD display or mobile app. The EQ function helps optimize battery performance.
- Softwareopdateringer: Ensure your inverter's firmware and monitoring app are up-to-date for optimal performance and security.
- Professionelt tjek: Consider an annual inspection by a qualified technician to ensure all components are functioning correctly and safely.
6. Fejlfinding
Dette afsnit indeholder grundlæggende fejlfindingstrin til almindelige problemer. Kontakt teknisk support ved komplekse problemer.
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Inverteren tænder ikke | No AC input, battery disconnected, or power switch off. | Check AC input, ensure battery is connected, and verify power switch is ON. |
| No power output to loads | Overload, fault condition, or incorrect output priority. | Reduce load, check for fault codes on LCD, adjust output priority settings. |
| Batteriet oplades ikke | PV input too low/high, solar panels dirty, or battery communication error. | Tjek PV voltage/current, clean solar panels, verify RS485 communication. |
| WiFi-overvågning virker ikke | No internet connection, incorrect WiFi settings, or app issue. | Check router, reconfigure WiFi settings on inverter, restart app/phone. |
| Usædvanlige lyde eller lugte | Intern komponentfejl. | Immediately power off the system and contact technical support. Do not attempt to repair. |
7. Specifikationer
7.1 Inverter (ANL-6200T-48L-W-PRO) Specifications
| Kategori | Punkt | Specifikation |
|---|---|---|
| Generel | Model | ANL-6200T-48L-W-PRO |
| Fase | 1-fase ind / 1-fase ud | |
| Maksimal PV-indgangseffekt | 6500W | |
| Max Main Output Power | 6200VA/6200W | |
| Maksimal anden udgangseffekt | 6200VA/6200W | |
| Maksimal samlet udgangseffekt | 6200VA/6200W | |
| Parallel kapacitet | INGEN | |
| Aktivering af litiumbatteri | JA (via PV eller forsyningsselskab) | |
| Meddelelse | Kommunikation med litiumbatteri | JA (RS485) |
| Built-in Wifi | JA | |
| AC indgang | Nominel bindtage | 230VAC |
| Acceptable VoltagRækkevidde | 170-280 VAC (Til personlig computer); 90-280 VAC (Til husholdningsapparater) | |
| Frekvens | 50/60 Hz (Automatisk registrering) | |
| AC udgang | Nominel bindtage | 220/230VAC ± 5% |
| Surge Power | 12400VA | |
| Frekvens | 50/60 Hz | |
| Bølgeform | Ren Sine Wave | |
| Dobbelt udgange | Ja | |
| Overførselstid | 10 ms (til personlig computer); 20 ms (til husholdningsapparater) | |
| Maksimal effektivitet | 94 % | |
| Overbelastningsbeskyttelse | 5s@>=140% belastning; 10s@110%~140% belastning | |
| Batteri | Batteri Voltage | 48VDC |
| Floating Charge Voltage | 54VDC | |
| Overopladningsbeskyttelse | 63VDC | |
| Opladningstilstand | CC/CV | |
| Solcelleoplader og AC-oplader | Solar oplader type | MPPT |
| Maks. PV Array Power | 6500W | |
| Maks. PV Array Open Circuit Voltage | 500VDC | |
| PV Array MPPT VoltagRækkevidde | 60VDC-500VDC | |
| Maks. Solindgangsstrøm | 27A | |
| Maks. Solar Ladestrøm | 120A | |
| Maks. AC-ladestrøm | 80A | |
| Fysisk | Dimensioner, DxBxH(mm) | 438x312x122 |
| Package Dimensions, D x W x H(mm) | 540x390x210 | |
| Nettovægt (kg) | 9.3 | |
| Kommunikationsgrænseflade | RS485(RJ45) | |
| LCD | Farverig skærm + RGB-lys | |
| Miljø | Driftstemperaturområde | -10°C til 55°C |
| Opbevaringstemperatur | -15°C ~ 60°C | |
| Fugtighed | 5 % til 95 % relativ fugtighed (ikke-kondenserende) | |
| Beskyttelse mod indtrængen | IP21 |
7.2 Battery (ANJ-48V-100AH-P) Specifications
| Punkt | Specifikation | Bemærkninger |
|---|---|---|
| Typisk kapacitet | 5120Wh | 0.5 C ladeafladning for voltage |
| Kombinationsmetode | 16S1P | |
| Nominel bindtage | 51.2V | |
| Intern impedans | Batteri: ≤0.7 mΩ | AC 1KHz after standard charge |
| Charge Voltage (V) | 58.4V | |
| Standard opladningsstrøm | 50A | |
| Maks. Ladestrøm | 100A | |
| Kontinuerlig afladningsstrøm | 100A | |
| Pulsstrøm | 200A | |
| Forsendelse Voltage Krav | ≥51.2V | |
| Driftstemperatur | 0°C~+55°C | Opladning |
| -20°C~+55°C | Afladning | |
| -20°C~+45°C | Mindre end 1 måned | |
| Opbevaringstemperatur | -20°C~+35°C | Mindre end 6 måneder |
| EVE-fremstillet celle | 50160116-100 Ah | LiFePO4 |
| BMS | 16S100A | |
| Stik |
8. Brugertips
Based on common user experiences with similar solar inverter and battery systems:
- Indledende opkrævning: Ensure the battery is fully charged before its first major discharge cycle to calibrate the BMS.
- Overvågningsapp: Regularly check the mobile application for system status, performance data, and any alerts.
- Ventilation: Ensure adequate ventilation around both the inverter and battery to prevent overheating, especially during peak operation.
- Kabelstyring: Keep all wiring neat and secure to prevent accidental disconnections or damage.
- Støvkontrol: Utilize the detachable dust cover and clean regularly, particularly in dusty environments, to maintain optimal cooling and prevent component degradation.
9. Garanti og support
For warranty information, technical support, or service inquiries, please refer to the documentation provided with your purchase or contact Aninerel customer service directly. Keep your purchase receipt and product serial numbers handy for faster service.
Kontaktoplysninger: Please refer to the seller's official website or your purchase platform for the most up-to-date contact details for Aninerel support.