1. Introduktion
Thank you for choosing the Aigostar 50W Solar Street Light. This product is designed to provide efficient, ecological, and completely autonomous outdoor lighting. With its advanced features like an integrated motion sensor, remote control, and IP65 waterproof rating, it offers a sustainable and convenient lighting solution for various outdoor spaces.
Figure 1: Aigostar 50W Solar Street Light (front and solar panel view)
2. Sikkerhedsinstruktioner
- Ensure the product is installed by a qualified individual if you are unsure about the process.
- Forsøg ikke at adskille eller ændre produktet, da dette kan ugyldiggøre garantien og udgøre en sikkerhedsrisiko.
- Hold solpanelet rent for at sikre optimal opladningseffektivitet.
- Avoid placing the light in areas where it might be obstructed by trees or buildings, which could reduce sun exposure.
- This product is designed for outdoor use and is IP65 waterproof; however, avoid submerging it in water.
3. Pakkens indhold
Markér venligst feltet for følgende elementer:
- 1 x Aigostar 50W solcelledrevet gadebelysningsenhed
- 1 x fjernbetjening
- Monteringsudstyr (skruer, ankre)
Note: The wall mount bracket is NOT included and must be purchased separately.
Figure 2: Package contents and dimensions (Light: 390x193mm, Solar Panel: 390x193mm, Remote: 120x45mm, Bracket: 110x25mm)
4. Specifikationer
| Feature | Specifikation |
|---|---|
| Mærke | AIGOSTAR |
| Varetype | Gadelys |
| Strømkilde | Solar (Photovoltaic Panel) |
| Wattage | 50W svarende til |
| Lysstrøm | 500 lumen |
| Udsender farve | Kold hvid |
| Vandtæt vurdering | IP65 |
| Solopladningstid | 4-6 hours (optimal sunlight) |
| Arbejdstid | Op til 12 timer |
| Bevægelsessensor rækkevidde | Op til 8 meter |
| Bevægelsessensorvinkel | 120° |
| Installationsmetode | Assembly (Wall Mount) |
| Anbefalet installationshøjde | 3-6 meter |
| Dimensioner (lysenhed) | 390 x 193 x 57 mm |
Figure 3: IP65 Waterproof and Weather Resistance
5. Opsætning
5.1 Valg af installationssted
For optimal performance, select a location that receives direct sunlight for 4-6 hours daily. Avoid shaded areas from trees, buildings, or other obstructions that could hinder solar charging.
5.2 Montering af lyset
- Attach the mounting bracket (not included) to the desired surface using appropriate screws and anchors. Ensure the surface is sturdy enough to support the light.
- Secure the solar street light unit to the mounting bracket.
- Juster solpanelets vinkel for at maksimere soleksponeringen.
The recommended installation height is between 3 to 6 meters for optimal light distribution and motion sensor effectiveness.
Figure 4: Recommended Installation Height and Sensing Range
6. Betjeningsvejledning
6.1 Indledende drift
Upon initial installation, allow the solar street light to charge for at least one full day (4-6 hours of direct sunlight) before its first use to ensure the battery is sufficiently charged.
6.2 Fjernbetjeningsfunktioner
The included remote control allows you to manage various functions of your solar street light:
Figur 5: Fjernbetjeningsfunktioner
- TÆND SLUK: Force turn the light on or off.
- Fremhævningstilstand: Activates 100% brightness that does not dim slowly. This button is valid when the light is on.
- Induktionstilstand: The light operates at 8% brightness when no motion is detected and switches to 100% brightness when people are present.
- 3H Timing: The light operates at 75% brightness and turns off automatically after 3 hours.
- 6H Timing: The light turns on according to the 'AUTO' mode and turns off automatically after 6 hours.
- Induction after Timing 4H: The light turns on according to 'AUTO' mode. After 4 hours, it operates at 60% brightness when people are present and 8% brightness when no one is detected.
- Automatisk tilstand (AUTO): Engages a slow dimming mode, transitioning between 60% and 8% brightness based on ambient light and motion.
6.3 Smart Bevægelsessensor
The integrated motion sensor detects presence up to 8 meters away within a 120° angle. This feature optimizes energy saving and security:
- Ingen bevægelse: The light maintains a dim 8% brightness to conserve energy.
- With Movement: The light instantly switches to 100% full illumination for maximum visibility and safety.
Figure 6: Induction Mode Operation
7. Vedligeholdelse
- Rengør solpanelet: Tør solpanelet regelmæssigt af med en blød, tør klud.amp klud til at fjerne støv, snavs eller affald. Et rent panel sikrer maksimal absorption af sollys og opladningseffektivitet.
- Tjek for forhindringer: Periodically inspect the area around the light to ensure no new obstructions (e.g., growing branches) are blocking sunlight from reaching the solar panel.
- Batteripleje: The integrated battery is designed for long-term use. Avoid prolonged storage in a completely discharged state.
8. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Lyset tænder ikke om natten. | Insufficient solar charge; ON/OFF switch is off; faulty sensor. | Ensure the solar panel receives 4-6 hours of direct sunlight. Check if the light is turned ON via the remote or manual switch. |
| Lyset er svagt eller forbliver kun tændt i en kort periode. | Insufficient solar charge; dirty solar panel; battery degradation. | Relocate the light to a sunnier spot. Clean the solar panel. If the problem persists after several sunny days, the battery may need replacement (contact support). |
| Bevægelsessensoren fungerer ikke korrekt. | Sensor obstructed; incorrect mode selected; sensor malfunction. | Ensure the sensor lens is clean and unobstructed. Verify the correct induction mode is selected on the remote. |
| Fjernbetjeningen reagerer ikke. | Remote battery depleted; remote out of range; signal obstruction. | Replace the remote control battery. Ensure you are within the 8-meter remote control distance. Remove any obstructions between the remote and the light. |
9. Brugertips
- Maksimér sollys: Always aim to install your solar street light in a location that receives maximum direct sunlight throughout the day, especially during winter months when sunlight is scarcer.
- Regelmæssig rengøring: A quick wipe of the solar panel once a month can significantly improve charging efficiency and overall light performance.
- Testtilstande: Experiment with the different remote control modes (e.g., 3H, 6H, AUTO, Induction) to find the best setting for your specific needs and energy saving preferences.
10. Garanti og support
Aigostar products are manufactured to high-quality standards. For any issues or questions regarding your solar street light, please contact the seller or manufacturer's customer support. Keep your purchase receipt as proof of purchase for warranty claims.