JEYI 4-Bay RAID NVMe Enclosure User Manual

1. Introduktion

The JEYI 4-Bay RAID NVMe Enclosure (Model JF2464X4) is a high-performance external storage solution designed for users requiring fast data transfer and flexible storage configurations. It supports up to four NVMe M.2 2280 SSDs, offering a total capacity of up to 32TB. With compatibility for Thunderbolt 4/3 and USB4 (40Gbps), it ensures rapid data access. The enclosure features a high-performance ASM2464PDX chip and a built-in turbine fan for efficient cooling, maintaining optimal performance during intensive operations.

This manual provides detailed instructions for setting up, operating, and maintaining your JEYI 4-Bay RAID NVMe Enclosure.

Figure 1: JEYI 4-Bay RAID NVMe Enclosure overview, highlighting 4-Bay, RAID 0/1/2/5/JBOD, 40Gbps Thunderbolt 4/3 compatibility, and Smart Fan.

2. Pakkens indhold

Tjek venligst pakken for følgende varer:

• 1 x JEYI 4-Bay RAID Enclosure
• 1 x skruetrækker
• Thermal pads (set)
• 1 x 80Gbps Cable

Figur 2: Visuel repræsentation af den medfølgende pakkes indhold.

3. Specifikationer

Note: All speed tests are based on PCIe 4.0 NVMe SSDs. Speeds may be lower with PCIe 3.0 SSDs.

Figur 3: Ydeevne i forhold tilview for various PCIe configurations.

Figure 4: Detailed speed table for Isolated, RAID 0, RAID 1, RAID 5, and JBOD modes.

Figure 5: Illustrates support for NVMe M.2 2280 SSDs (M-Key, B&M-Key) and incompatible sizes.

4. Opsætningsvejledning

4.1 SSD installation

1. Open the aluminum case: Use the provided screwdriver to carefully open the enclosure.
2. Insert SSD(s): Gently insert your NVMe M.2 2280 SSD(s) into the available slots. Ensure they are seated correctly. No SSD screws are required for installation.
3. Cover with thermal pads: Place the silicone thermal pads over the installed SSDs to ensure proper heat dissipation.
4. Luk sagen: Carefully put the aluminum case back together and secure it.
5. Tilslut strøm: The 4-bay RAID SSD Enclosure requires external power. Connect a 12V/3A PD (Power Delivery) adapter to the 'PD Input' port. Note: A power adapter is not included in the package.
6. Connect to host: Connect the enclosure to your computer using the provided 80Gbps cable via the 'Host' port.

Figure 6: Step-by-step guide for installing SSDs into the enclosure.

Figure 7: Port identification for Host connection and PD Power Input.

5. Betjeningsvejledning

5.1 Usage Modes: Isolated vs. RAID

The enclosure supports two primary usage modes:

• Isolated Mode (Non-RAID): Each installed SSD is recognized as an individual drive by your operating system. This allows you to use 1, 2, 3, or 4 drives separately.
• RAID Mode: Multiple SSDs are combined into a single logical unit for improved speed, redundancy, or both, depending on the RAID level chosen.

Figure 8: Comparison of Isolated Mode (multiple volumes) and RAID Mode (single volume).

5.2 RAID-konfiguration

The enclosure supports various RAID levels:

• Windows-systemer: Supports RAID 0, RAID 1, RAID 5, and JBOD.
• macOS-systemer: Supports RAID 0, RAID 1, and JBOD.

Vigtig bemærkning: RAID configuration is unsupported over standard USB connections. Setting up a RAID array requires a USB 4.0 or Thunderbolt interface. Drives connected via standard USB will be recognized as individual volumes.

Figure 9: RAID level support matrix for macOS and Windows.

Figure 10: Diagram illustrating RAID 0 (striping) data distribution.

Figure 11: Diagram illustrating RAID 1 (mirroring) data redundancy.

Figure 12: Diagram illustrating RAID 5 (distributed parity) data protection.

5.3 Ventilatorstyring

The enclosure features a built-in turbine fan to manage heat. You can control the fan speed by pressing the button on the enclosure:

• Tryk på knappen tre gange consecutively to cycle through fan modes.
• The indicator light color corresponds to the current fan speed:
• Hvid: Fan Stopped
• Blå: Lav hastighed
• Orange: Middel hastighed
• Lilla: Høj hastighed

Figure 13: Fan speed control and corresponding LED indicators.

6. Vedligeholdelse

• Rensning: Use a soft, dry cloth to clean the exterior of the enclosure. Do not use liquid cleaners or aerosols.
• Ventilatorpleje: Periodically check the fan vents for dust accumulation. Use compressed air to gently clear any dust to ensure optimal airflow and cooling performance.
• Termiske puder: The included thermal pads are crucial for heat transfer from the SSDs to the aluminum case. Ensure they are properly placed during installation.
• Opbevaring: Når kabinettet ikke er i brug, skal det opbevares køligt og tørt, væk fra direkte sollys og ekstreme temperaturer.

Figur 14: Intern view showing the cooling design with fan and thermal elements.

7. Fejlfinding

7.1 Generelle problemstillinger

• Indkapsling ikke genkendt:
  • Ensure the 12V/3A PD power adapter is connected and providing power.
  • Verify the 80Gbps cable is securely connected to both the enclosure and your computer's USB4 or Thunderbolt port.
  • Try connecting to a different port on your computer.
  • Check if the SSDs are properly installed and seated within the enclosure.
• Langsomme overførselshastigheder:
  • Ensure you are using a USB4 or Thunderbolt port on your computer. Older USB standards (e.g., USB 3.0/3.1/3.2) will result in lower speeds.
  • Confirm your SSDs are NVMe PCIe 4.0 for optimal performance. PCIe 3.0 SSDs will yield lower speeds.
  • Check your computer's drivers for USB/Thunderbolt ports.
  • Ensure the fan is operating to prevent thermal throttling.

7.2 RAID Configuration Specifics

WARNING: Changing RAID Mode Erases All Data!

Before performing any RAID operation (configuring or unconfiguring), ensure you have backed up all critical data from the drives. All data on the drives will be permanently deleted during RAID mode changes.

After changes, the drive(s) must be re-initialized and a new volume created before use.

Figure 15: Critical warning regarding data loss and re-initialization during RAID configuration.

7.3 Compatibility Notice for AMD Systems

While fully compatible with Intel and Apple systems, the Quad Enclosure (ASM2464PDX) may experience issues with some AMD-based devices, primarily limited to their USB4.0 and Thunderbolt interfaces. Standard USB 3.2 ports on AMD systems are unaffected and will function normally. AMD users are strongly recommended to verify compatibility with their specific hardware before purchase.

Figure 16: Visual reminder of potential AMD system compatibility limitations.

8. Brugertips

• For optimal performance, always use the highest speed port available on your computer (Thunderbolt 4/3 or USB4).
• Regularly check the fan status, especially during prolonged high-load operations, to ensure effective cooling and prevent performance degradation.
• Consider using RAID 0 for maximum speed in applications like video editing, but always back up your data due to lack of redundancy.
• For data redundancy, RAID 1 is recommended, though it halves your total storage capacity.
• If you encounter any issues, ensure all cables are firmly connected and the external power adapter is functioning correctly.

9. Garanti og support

For warranty information and technical support, please refer to the official JEYI website or contact your retailer. A digital version of the user manual (PDF) may also be available for download from the manufacturer's support page: Brugervejledning (PDF).