1. Introduktion
The Freedconn F1 is a motorcycle intercom helmet Bluetooth headset designed to enhance your riding experience with seamless communication and entertainment. Featuring CVC/DSP noise cancellation, high-fidelity stereo music, Bluetooth 5.2 connectivity, and IP67 waterproof rating, the F1 ensures clear audio and reliable performance in various conditions. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to help you get the most out of your device.
Figure 1: Freedconn F1 Key Features Overview
2. Pakkens indhold
Markér venligst feltet for følgende elementer:
- F1 Main Unit x1
- Subwoofer High Fidelity Sound Quality Speaker x2
- 3M Tape Mounting Bracket x1
- Speaker Pads x2
- Speaker Booster Pad x2
- Brugervejledning x1
- USB-C kabel x1
Figure 2: Freedconn F1 Package Contents
3. Produktet er slutview
The Freedconn F1 unit features an intuitive operation panel and essential ports for connectivity and charging.
Figure 3: Operation Panel and Functional Parameters
3.1 Buttons and Ports:
- Volume Down Button / Previous Song: Sænker lydstyrken eller springer til det forrige spor.
- Volume Up Button / Next Song: Øger lydstyrken eller springer til næste spor.
- Power Button / Pairing: Powers the device on/off and initiates Bluetooth pairing.
- Multifunktionsknap: Controls various functions like answering calls, playing/pausing music, and activating voice assistant.
- USB-C Charge Port: Til opladning af enheden.
- Headset port: Connects the speakers and microphone.
3.2 Dimensions and Weight:
- Størrelse: 84 mm x 40 mm x 20 mm
- BT Unit Net Weight: 47 g
- Enkeltpakkevægt: 0.15 kg
4. Opsætning og installation
Follow these steps to install your Freedconn F1 headset on your helmet:
- Oplad enheden: Before first use, fully charge the F1 unit using the provided USB-C cable. A full charge takes approximately 2 hours.
- Monter hovedenheden: Attach the 3M Tape Mounting Bracket to the side of your helmet. Ensure the surface is clean and dry for optimal adhesion. Securely slide the F1 Main Unit onto the mounted bracket.
- Installer højttalere: Place the subwoofer high-fidelity speakers inside your helmet, aligning them with your ears. Use the provided speaker pads for comfort. If needed, use the speaker booster pads to bring the speakers closer to your ears for better sound quality.
- Connect Headset: Plug the speaker and microphone cable into the Headset Port on the F1 Main Unit.
5. Betjeningsvejledning
5.1 Tænd/sluk
- Tænd: Long press the Power Button until you hear an audible prompt.
- Sluk: Long press the Power Button until you hear an audible prompt.
5.2 Bluetooth -parring
The F1 uses Bluetooth 5.2 for faster, more stable, and reliable connections.
- Gå ind i parringstilstand: With the device off, long press the Power Button until the LED indicator flashes red and blue alternately, indicating it's in pairing mode.
- Connect to Phone/GPS: On your mobile phone or GPS device, enable Bluetooth and search for available devices. Select "F1" from the list. Once connected, the LED indicator will flash blue slowly.
- Dobbelt telefonforbindelse: The F1 can connect to two mobile phones simultaneously. Connect the first phone for music/GPS/FM, then connect the second phone for calls. Phone calls are prioritized.
5.3 Telefonopkald
- Besvar opkald: Incoming calls are answered automatically, allowing you to drive safely without manual operation.
- Afslut opkald: Tryk kort på multifunktionsknappen.
- Afvis opkald: Long press the Multi-Function Button.
5.4 Musikafspilning
- Afspil/pause: Tryk kort på multifunktionsknappen.
- Næste sang: Short press the Volume Up Button.
- Forrige sang: Short press the Volume Down Button.
- Lydstyrkekontrol: Long press the Volume Up or Volume Down buttons.
5.5 Samtaleanlægsfunktion
The F1 supports intercom communication for up to 2 riders with a maximum distance of over 1000m.
- Pairing Intercom Units: Ensure both F1 units are in pairing mode (LED flashes red and blue). Short press the Power Button on one unit to initiate intercom pairing. Once connected, both units will indicate successful pairing.
- Start/Slut samtaleanlæg: Short press the Multi-Function Button on either paired unit to start or end intercom communication.
5.6 Stemmeassistent
Activate your phone's voice assistant (Siri, Google Assistant, Bixby) with a single touch for hands-free control.
- Aktiver: Short press the Multi-Function Button twice.
Figure 4: Activating Voice Assistant
Video 1: Freedconn F1 Product Features (demonstrates automatic call answering, voice assistant, charging, dual phone connection, CVC/DSP noise reduction, 42mm speaker, Bluetooth 5.1, IP67 waterproof).
6. Vedligeholdelse
- Rensning: Brug en blød, damp cloth to clean the exterior of the F1 unit. Do not use harsh chemicals or abrasive cleaners.
- Vandtæthed: The F1 is IP67 waterproof and dustproof, protecting the internal circuit from dust and water intrusion. It is suitable for various driving conditions, including rain and snow. However, avoid submerging the device in water for extended periods.
- Opbevaring: Opbevar enheden på et køligt, tørt sted, når det ikke er i brug.
Figure 5: IP67 Waterproof and Dustproof
7. Fejlfinding
If you encounter issues with your Freedconn F1, try the following:
- Ingen strøm: Ensure the device is fully charged. Connect it to a power source using the USB-C cable.
- Kan ikke parre Bluetooth: Make sure the F1 is in pairing mode (LED flashing red and blue). Ensure your phone/GPS Bluetooth is on and discoverable. Try restarting both devices.
- Dårlig lydkvalitet: Check that the speakers are correctly positioned inside your helmet and close to your ears. Ensure the headset cable is securely plugged into the F1 unit. Verify that the volume is adjusted appropriately on both the F1 and your connected device.
- Intercom forbinder ikke: Ensure both F1 units are within range and in intercom pairing mode. Repeat the intercom pairing process.
- Stemmeassistent svarer ikke: Ensure your phone is connected via Bluetooth and its voice assistant feature is enabled.
8. Specifikationer
| Feature | Detalje |
|---|---|
| Mærke | FreedConn |
| Modelnavn | F1 |
| Varetype | Hjelm Bluetooth-headset |
| Materiale | ABS |
| Bluetooth version | 5.2 |
| Tilslutningstilstand | Bluetooth |
| Særlige funktioner | Waterproof, Universal Pairing Function, Noise Reduction (CVC/DSP) |
| Vandtæt vurdering | IP67 |
| Batterikapacitet | 1100mAh (indbygget batteri) |
| Arbejdstid | 42-48 hours (Music/Talking) |
| Opladningstid | 2 timer |
| Standby tid | 240 timer |
| Maksimal intercomafstand | >1000m |
| Maximum Number of Speakers (Intercom) | >6 (Supports multi-rider intercom) |
| Varedimensioner (L x B x H) | 9 cm x 4.5 cm x 2.2 cm |
| Varens vægt | 0.3kg (Package Weight: 0.15kg) |
| Gældende hjelmtype | Half Helmet, MODULAR, MOTOCROSS, Open face, Full Face, Flip Up Helmet, Universal |
| Certificeringer | CE, RoHS, FCC, ISO9001 |
9. Brugertips
- Køb af enkelt enhed: Please note that the standard purchase typically includes one F1 main unit. If you intend to use the intercom function with another rider, ensure you purchase two units.
- Optimal højttalerplacering: Experiment with the speaker placement inside your helmet. Using the booster pads can significantly improve sound clarity and bass response, especially for music.
- Voice Assistant Convenience: Utilize the one-touch voice assistant feature for hands-free control of navigation, calls, and music, enhancing safety during your ride.
- Batteristyring: For long rides, fully charge the device before departure. The 1100mAh battery provides ample working time, but keeping it topped up ensures uninterrupted communication and entertainment.
10. Garanti og support
The Freedconn F1 headset comes with a 365-day free warranty. This warranty covers manufacturing defects and ensures free replacement under specified terms and conditions. For any issues or support inquiries, please contact the seller or manufacturer directly.
Figure 6: 365 Days Free Warranty
