Philips TAS1009 Desktop Wireless Speaker

Indledning

The Philips TAS1009 Desktop Wireless Speaker delivers clear, rich sound in a compact and portable design. Ideal for both office and home environments, this speaker features Bluetooth 5.3 for stable wireless connectivity, a 1200mAh battery for extended playback, and True Wireless Stereo (TWS) pairing for an immersive audio experience. It also includes a built-in microphone for convenient hands-free calling.

Opsætning

1. Tænd/sluk

• At tænde: Tryk og hold ON/OFF-knappen nede i 1 sekund.
• At slukke: Tryk og hold ON/OFF-knappen nede i 3 sekunder.

2. Opladning

The speaker is powered by a built-in 1200mAh battery. Connect the speaker to a 5V DC power source using a compatible USB cable for charging. Fast charging is not supported.

3. Bluetooth-parring

To connect your Philips TAS1009 speaker to a Bluetooth-enabled device:

1. Sørg for, at højttaleren er tændt.
2. Aktiver Bluetooth på din enhed (f.eks. smartphone, tablet, computer).
3. Søg efter available Bluetooth devices and select "Philips TAS1009" from the list.
4. Once paired, the speaker will indicate a successful connection (e.g., an audible prompt or LED indicator change).

4. Ægte trådløs stereo (TWS) parring

For an immersive stereo experience, you can pair two Philips TAS1009 speakers together:

1. Sørg for, at begge højttalere er slukkede.
2. Tænd for begge højttalere.
3. On one of the speakers, quickly press the ON/OFF button three times consecutively. This initiates TWS pairing mode.
4. The speakers will automatically search for and connect to each other. Once connected, they will function as independent left and right channels.
5. To disconnect TWS pairing, quickly press the ON/OFF button three times again on either speaker.

Betjeningsvejledning

The Philips TAS1009 features intuitive key touch controls on its top surface.

1. ON/OFF knap

• Tænd: Tryk og hold i 1 sekunder.
• Sluk: Tryk og hold i 3 sekunder.
• TWS Pairing/Disconnect: Quickly press three times consecutively.

2. Afspil/pause knap

• Afspil/pause: Kort tryk.
• Disconnect Wireless Connection: Langt tryk.
• Næste sang: Quickly press twice.
• Forrige sang: Quickly press three times.

3. Volume Control (± Buttons)

• Adjust Volume by 1 Level: Short press the '+' or '-' button.
• Continuous Volume Adjustment: Long press the '+' or '-' button.

4. Opkaldsknap

• Besvar opkald: Kort tryk.
• Afslut opkald: Short press again.
• Afvis opkald: Langt tryk i 1 sekund.
• Genopkald sidste nummer: Dobbeltklik.

Opretholdelse

For at sikre din Philips TAS1009-højttalers levetid og optimale ydeevne skal du følge disse vedligeholdelsesretningslinjer:

• Rensning: Use a soft, dry cloth to wipe the speaker's exterior. Do not use abrasive cleaners, waxes, or solvents.
• Opbevaring: Opbevar højttaleren et køligt, tørt sted væk fra direkte sollys og ekstreme temperaturer.
• Batteripleje: For at forlænge batteriets levetid bør du undgå at aflade batteriet helt ofte. Oplad højttaleren regelmæssigt, selvom den ikke er i brug i længere perioder.
• Undgå vandeksponering: The speaker is not waterproof. Keep it away from liquids and moisture to prevent damage.

Fejlfinding

If you encounter issues with your Philips TAS1009 speaker, refer to the following common problems and solutions:

Ingen lyd

• Sørg for, at højttaleren er tændt og opladet.
• Kontroller, at lydstyrken på både højttaleren og din tilsluttede enhed er skruet op.
• Verify that the speaker is correctly paired via Bluetooth to your device.
• If using TWS, ensure both speakers are properly paired and connected.

Kan ikke parres via Bluetooth

• Make sure the speaker is in pairing mode (if applicable, after initial power on).
• Deaktiver og genaktiver Bluetooth på din enhed.
• Move the speaker closer to your device and away from other wireless interference sources.
• Prøv at genstarte både højttaleren og din Bluetooth-enhed.
• If two speakers are connected via TWS, ensure Bluetooth is enabled on your device and try adjusting the audio progress bar slightly to synchronize sound.

Opladningsproblemer

• Sørg for, at opladningskablet er korrekt tilsluttet til både højttaleren og strømkilden.
• Kontroller, at strømkilden er aktiv og leverer 5V DC.
• Prøv at bruge et andet USB-opladerkabel eller en anden strømadapter.

TWS-parring mislykkes

• Ensure both speakers are the same model (TAS1009).
• Make sure both speakers are fully charged or have sufficient battery.
• Follow the TWS pairing steps precisely: power off both, then power on both, and quickly press the ON/OFF button three times on one speaker.

Specifikationer

Brugertips

• TWS-opsætning: For the best stereo sound, place the two TWS-paired speakers equidistant from your listening position.
• Opkaldskvalitet: When making or receiving calls, ensure you are in a quiet environment for optimal clarity, as the built-in microphone is designed for general hands-free use.
• Batterilevetid: To maximize the 8-hour battery life, consider reducing the volume level.

Garanti og support

For detailed warranty information and further support, please refer to the official Philips documentation. A user manual in PDF format is available for download and can be accessed her.

If you require technical assistance or have questions not covered in this manual, please contact Philips customer support through their official webwebsted eller udpegede servicekanaler.