DOMRAEM ESP32 WLED Digital LED-controller Brugermanual

1. Introduktion

The DOMRAEM ESP32 WLED Digital LED Controller is a versatile and powerful device designed to control addressable LED strips. Featuring flexible power options including USB-C Power Delivery (PD) and dual DC inputs, it offers extensive compatibility and smart control capabilities through the pre-installed WLED firmware. This manual provides detailed instructions for setting up, operating, and maintaining your controller.

Nøglefunktioner omfatter:

• Fleksibel strømforsyning med dobbelt system: Supports Type-C PD 3.0 (5V/3A, 12V/3A, 20V/3A) and dual 5-24V DC inputs.
• 100+ Effects & Smart Control: Pre-installed WLED firmware with numerous lighting effects, mobile app, and web kontrollere.
• Bred kompatibilitet: Understøtter mainstream digitale LED'er som WS2812B, SK6812, APA102, der dækker DIMMER, CCT, RGB, RGBW og RGBCCT-typerne.
• Reliable Components: High-performance ESP32 module, NXP high-speed cache chip, solid-state and large electrolytic capacitors for stability.
• Sikkerhedsforsikring: Protected by a 16A fuse and features low standby power (~0.5W).
• Udvidelsesporte: Backup interface for IR receiver or physical PUSH switch.
• Modelspecifikke funktioner:
  • DOM-WLE-10P: Standard controller without microphone or UART download port.
  • DOM-WLE-11P: Includes a sensitive microphone for music reactive modes.
  • DOM-WLE-12P: Includes a sensitive microphone and a UART download port for easy DIY programming.

2. Sikkerhedsoplysninger

ADVARSEL: Når du bruger PD-strøm, skal du altid sørge for at lydstyrken ertage matches your LED strip's requirement before connecting to prevent damage to the LED strip and controller. Incorrect voltage vil beskadige LED-strimlen.

Always disconnect power before making any wiring changes. Ensure all connections are secure to prevent short circuits.

3. Produktet er slutview

3.1. Controller Components and Pinout

The DOMRAEM WLED controller features various input/output ports and control buttons. Refer to the diagrams below for specific pinout details for each model.

DOM-WLE-10P Pinout

Nøglekomponenter: GND, GPIO2, GPIO16, V+, 1033, 16A Fuse, Opt Button, Restart Button, Indicator Light (IL), USB-C Power Input, DC 5-12V-24V Barrel Jack Input.

DOM-WLE-11P Pinout

Nøglekomponenter: GND, GPIO2, GPIO16, V+, 1033, 16A Fuse, Microphone, Opt Button, Restart Button, Indicator Light (IL), USB-C Power Input, DC 5-12V-24V Barrel Jack Input.

DOM-WLE-12P Pinout

Nøglekomponenter: GND, GPIO2, GPIO16, V+, 1033, 16A Fuse, Microphone, UART Port, Opt Button, Restart Button, Indicator Light (IL), USB-C Power Input, DC 5-12V-24V Barrel Jack Input.

3.2. Internal Board Layout

DOM-WLE-10P Core Board

1. Powered by USB-C 5V/3A/12V/3A/20V/3A Max
2. PD-chip
3. Backup interface (IR receiver, PUSH switch)
4. NXP højhastigheds-cachechip
5. MOS reduces power consumption
6. ESP32-modul med høj stabilitet
7. 16A sikring
8. Large electrolytic capacitors for anti-interference
9. Solid-state capacitors for durability and stability

DOM-WLE-11P Core Board

1. Powered by USB-C 5V/3A/12V/3A/20V/3A Max
2. PD-chip
3. Backup interface (IR receiver, PUSH switch)
4. NXP højhastigheds-cachechip
5. MOS reduces power consumption
6. Følsom mikrofon
7. ESP32-modul med høj stabilitet
8. 16A sikring
9. Large electrolytic capacitors for anti-interference
10. Solid-state capacitors for durability and stability

DOM-WLE-12P Core Board

1. Powered by USB-C 5V/3A/12V/3A/20V/3A Max
2. PD-chip
3. UART-chip
4. Backup interface (IR receiver, PUSH switch)
5. NXP højhastigheds-cachechip
6. MOS reduces power consumption
7. Følsom mikrofon
8. ESP32-modul med høj stabilitet
9. 16A sikring
10. Large electrolytic capacitors for anti-interference
11. Solid-state capacitors for durability and stability

4. Specifikationer

4.1. WLED Remote Control (Optional Accessory)

5. Opsætningsvejledning

5.1. Tilslutning af strømforsyning

The controller offers two flexible power input options:

• USB-C PD-indgang: Connect a compatible USB-C PD charger or power bank (5V/3A, 12V/3A, or 20V/3A) to the USB-C port. This is ideal for convenient testing and portable setups.
• Dual DC Inputs: Use the barrel jack (Ø5.5mm x 2.1mm) or the quick-connect screw terminals for 5-24V DC power. Ensure the power supply matches the voltage requirements of your LED strip. The quick connect port supports up to 16A total output.

Vigtig: Always match the input voltage to your LED strip's voltage (e.g., 5V strip with 5V power, 12V strip with 12V power). Mismatched voltages will damage the LED strip.

Image: USB-C Power Delivery Support, showing compatibility with 5V/3A, 12V/3A, and 20V/3A protocols.

5.2. LED-strimmelledninger

Connect your addressable LED strip to the output terminals. The controller supports two channels. Ensure correct polarity (V+ to V+, GND to GND, Data to GPIO2 or GPIO16).

Generel ledningsføring:

• V+: Connect to the positive power input of your LED strip.
• GND: Connect to the ground of your LED strip.
• D (Data): Connect to the data input of your LED strip. The controller provides GPIO2 and GPIO16 for data output.

5.3. Initial WLED Configuration (App/Web)

The controller comes pre-installed with WLED firmware. Follow these steps to connect and configure your device:

1. Tænd: Power on the WLED controller using either USB-C PD or DC input.
2. Connect to WLED-Ap WiFi: On your mobile phone or computer, open WiFi settings. Find and connect to the network named "WLED-Ap". The default password is "wled1234".
3. Access WLED Interface: After a successful connection, your device should automatically redirect to the WLED page in a browser. If not, open a web browser and navigate to the WLED page (usually by typing 4.3.2.1 or wled.local in the address bar). Click "TO THE CONTROLS!".
4. Save WiFi Credentials: Enter your home WiFi network name (SSID) and password. Click "Save" at the top of the screen. Ensure you are connecting to a 2.4GHz WiFi network, as 5GHz is not supported.
5. Connect to Home WiFi: Connect your phone/computer to the same home WiFi network that you configured the WLED controller to use.
6. Åbn WLED-appen: Download and open the WLED app (search "WLED" or "WLED Native" on App Store/Google Play Store, or download from github.com/Aircoookie/WLED-App/releases).
7. Opdag controller: The app should discover your WLED controller on the local network. Tap on the controller to enter the WLED page for configuration.

Image: Step-by-step guide for connecting to the WLED controller via WiFi and configuring it through the WLED application.

6. Betjeningsvejledning

6.1. WLED-appstyring

The WLED app provides comprehensive control over your LED strips. You can:

• Skift farver: Use the color wheel to select static colors.
• Anvend effekter: Choose from over 100 built-in dynamic effects (Rainbow Gradient, Breathing, etc.).
• Segmentkontrol: Divide your LED strip into multiple independent segments, each with its own color and effect settings. This allows for highly customized lighting patterns.
• Music Sync (DOM-WLE-11P/12P): Utilize the built-in microphone to synchronize lighting effects with music in real-time.
• Synkroniseringseffekter: Synkroniser lyseffekter på tværs af flere WLED-controllere på det samme WiFi-netværk.

Image: WLED App control interface showing color selection, effects, segments, and presets.

Image: Segmented Color Control, demonstrating how to personalize each strip segment.

Image: Sync Effects feature, showing how lighting effects can be synchronized across controllers.

6.2. Fjernbetjening (valgfrit)

If you have the optional WLED remote control (Model DOM-WLE-RC005), you can use it for basic operations:

• TIL/FRA: Tænd eller sluk lysene.
• Lysstyrke: Juster lysstyrkeniveauer.
• Belysningstilstande: Switch between preset lighting modes (1-4).
• Natlys: Activate a night light function.
• Favorite Modes: The remote can be configured to set four favorite modes.

Image: The WLED Remote Control can set four favorite modes for quick access.

6.3. Button Functions (On-board)

The controller features two on-board buttons: Genstart og Opt.

DOM-WLE-10P Button Functions

Knap	Tid	Status	Indikatorlampe (IL)
Genstart	Langt tryk 8s	Skift til 5V/3A Maks.	Grøn
Genstart	Langt tryk 8s	Skift til 12V/3A Maks.	Gul
Genstart	Langt tryk 8s	Skift til 20V/3A Maks.	Rød
Opt	Hold 10s to reset; Briefly press to turn on/off; Press and hold for 2 seconds to switch colors.

DOM-WLE-11P/12P Button Functions

Knap	Tid	Status	Indikatorlampe (IL)
Genstart	Langt tryk 8s	Skift til 5V/3A Maks.	Grøn
Genstart	Langt tryk 8s	Skift til 12V/3A Maks.	Gul
Genstart	Langt tryk 8s	Skift til 20V/3A Maks.	Rød
Genstart	Kort tryk 1s	Skift til downloadtilstand	Blå
Opt	Hold 10s to reset; Briefly press to turn on/off; Press and hold for 2 seconds to switch colors.

6.4. Microphone Function (DOM-WLE-11P/12P)

For models with a microphone, after resetting the device, the microphone parameters need to be configured for the first time. The device will then need to be restarted.

Konfigurationsoplysninger:

• Mikrofontype: Generisk I2S PDM
• I2S SD-ben: 26
• I2S WS-ben: 21

6.5. DIY Programming (DOM-WLE-12P Only)

The DOM-WLE-12P model features a UART download port. This allows for easy DIY programming by connecting via USB-C without needing to open the case. This is useful for advanced users who wish to customize the firmware or add new functionalities.

7. Vedligeholdelse

• Rensning: Use a dry, soft cloth to clean the controller. Do not use liquid cleaners or aerosols.
• Opbevaring: Opbevar controlleren et køligt, tørt sted væk fra direkte sollys og ekstreme temperaturer.
• Firmwareopdateringer: Periodically check the official WLED project webwebsted eller fællesskabsfora for firmwareopdateringer for at sikre optimal ydeevne og adgang til nye funktioner.

8. Fejlfinding

• LED'erne lyser ikke:
  • Check power connections and ensure the power supply voltage matches the LED strip voltage.
  • Verify data line (D) connection to the correct GPIO pin.
  • Ensure the LED strip is compatible with the controller (WS281X, SK6812, APA102, etc.).
  • Check if the WLED app shows the controller as connected and if effects are enabled.
• Controlleren opretter ikke forbindelse til WiFi:
  • Ensure you are connecting to a 2.4GHz WiFi network.
  • Double-check the WiFi password.
  • Try resetting the controller's WiFi settings by holding the Opt button for 10 seconds.
• Music Sync not working (DOM-WLE-11P/12P):
  • Ensure the microphone parameters are correctly configured in the WLED settings after a reset.
  • Check if the controller is placed in an area where it can pick up sound clearly.
• Uventet opførsel:
  • Perform a soft reset via the WLED app or by briefly pressing the Opt button.
  • If issues persist, perform a factory reset by holding the Opt button for 10 seconds. Note that this will erase all custom settings.

9. Brugertips

• Strømforsyningstilpasning: Always use a power supply that matches the voltage of your LED strip. If using a 5V strip, use a 5V power supply. If using a 12V strip, use a 12V power supply. This is crucial to prevent damage.
• Varmestyring: For long LED strips or high brightness settings, ensure adequate ventilation around both the controller and the LED strip to prevent overheating.
• Eksperimentér med segmenter: The segment control feature in WLED is very powerful. Experiment with different segment lengths and effects to create unique and complex lighting patterns.
• Fællesskabsstøtte: The WLED community is very active. If you encounter advanced issues or want to explore more features, refer to the official WLED documentation and community forums online.

10. Garanti og support

This product comes with a standard manufacturer's warranty. Please retain your proof of purchase for any warranty claims. For technical support or further inquiries, please refer to the seller's contact information or the official WLED community resources.