GEYA GRT6-A/B-seriens elektroniske forsinkelsesrelæ, brugsanvisning

1. Introduktion

This manual provides detailed instructions for the GEYA GRT6-A/B series electronic delay time relays. The GRT6 series is designed for precise timing applications in various industrial and domestic settings. The GRT6-A model functions as an ON Delay relay, while the GRT6-B model functions as an OFF Delay relay. Both models offer a wide range of voltage support and time settings, making them versatile for different control requirements.

Front view of GEYA GRT6-A1 (ON Delay) and GRT6-B1 (OFF Delay) time relays, highlighting their functions and key specifications. — Figure 1: GEYA GRT6-A1 and GRT6-B1 Delay Time Relays

2. Nøglefunktioner

GRT6-A: Delay ON Function
GRT6-B: Delay OFF Function
Wide Range Voltage Support: AC/DC24~240V or AC230V
Nuværende vurdering: 10A/AC1
Outputkontakt: 1SPDT or 2SPDT (Single Pole Double Throw)
Tidsskala: 0.1 seconds to 10 days, divided into 10 selectable ranges.
Tidsindstilling: Adjustable via a potentiometer.
Statusindikation: Relay status indicated by LED.
Montering: 1 MODULE (18mm width) for DIN rail mounting.

Overview of GRT6 series time relays, illustrating key features such as delay functions, current rating, output contacts, and voltage muligheder. — Figure 2: GRT6 Series Key Features

3. Ansøgninger

The GEYA GRT6 series time relays are suitable for a variety of applications where precise timing and control are required. Common uses include:

General time switching tasks.
Controlling pump decay time after heating systems are switched off.
Switching and controlling fans.
Industrial automation fields.
Power system applications.
Integration into household appliances.
Automotive electronics systems.

Diagram illustrating various industries where GEYA GRT6 time relays can be applied, including industrial automation, power systems, household appliances, and automotive electronics. — Figure 3: Application Fields

4. Tekniske specifikationer

Refer to the table below for detailed technical parameters of the GRT6-A/B series.

Table of technical parameters for GRT6-A/B series, including supply terminals, voltage range, burden, power input, time ranges, output, current rating, and dimensions. — Figure 4: Technical Parameters Table

Table 1: Technical Parameters Overview
Parameter	GRT6-A1/B1	GRT6-A2/B2	GRT6-At/Bt
Fungere	A:delay ON; B:delay OFF	A:delay ON; B:delay OFF	A:delay ON; B:delay OFF
Forsyningsterminaler	A1-A2	A1-A2	A1-A2
Voltage rækkevidde	AC/DC 24-240V (50-60Hz)	AC/DC 24-240V (50-60Hz)	AC/DC 24-240V (50-60Hz)
Byrde	AC 0.09-3VA/DC 0.05-1.7W	AC 0.09-3VA/DC 0.05-1.7W	AC 0.09-3VA/DC 0.05-1.7W
Voltage rækkevidde	AC 230V (50-60Hz)	AC 230V (50-60Hz)	AC 230V (50-60Hz)
Strømindgang	AC max.6VA/1.3W	AC max.6VA/1.3W	AC max.6VA/1.3W
Forsyning voltage tolerance	-15 % +10 %	-15 % +10 %	-15 % +10 %
Udbudsindikation	grøn LED	grøn LED	grøn LED
Tidsintervaller	0.1s-10days, ON, OFF	0.1s-10days, ON, OFF	0.1s-10days, ON, OFF
Tidsindstilling	potentiometer	potentiometer	potentiometer
Tidsafvigelse	10%-mekanisk indstilling	10%-mekanisk indstilling	10%-mekanisk indstilling
Gentag nøjagtighed	0.2%-set værdi stabilitet	0.2%-set værdi stabilitet	0.2%-set værdi stabilitet
Temperatur koecient	0.05%/°C, at -20°C (0.05%/°F, at 68°F)	0.05%/°C, at -20°C (0.05%/°F, at 68°F)	0.05%/°C, at -20°C (0.05%/°F, at 68°F)
Produktion	1x SPDT	2x SPDT	1x SPDT (1xSPDT(Ins))
Nuværende vurdering	10A/AC1	10A/AC1	10A/AC1
Skift voltage	250 VAC / 24VDC	250 VAC / 24VDC	250 VAC / 24VDC
Min. brydeevne DC	500mW	500mW	500mW
Udgangsindikation	rød LED	rød LED	rød LED
Mekanisk liv	1 x 10⁷	1 x 10⁷	1 x 10⁷
Electrical life (AC1)	1 x 10⁵	1 x 10⁵	1 x 10⁵
Nulstil tid	max 200ms	max 200ms	max 200ms
Driftstemperatur	-20°C til +55°C (-4°F til 131°F)	-20°C til +55°C (-4°F til 131°F)	-20°C til +55°C (-4°F til 131°F)
Opbevaringstemperatur	-35°C til +75°C (-22°F til 158°F)	-35°C til +75°C (-22°F til 158°F)	-35°C til +75°C (-22°F til 158°F)
Montering/DIN-skinne	DIN-skinne EN/IEC 60715	DIN-skinne EN/IEC 60715	DIN-skinne EN/IEC 60715
Beskyttelsesgrad	IP40 for frontpanel/IP20 terminaler	IP40 for frontpanel/IP20 terminaler	IP40 for frontpanel/IP20 terminaler
Betjeningsposition	enhver	enhver	enhver
Overvoltage kategori	III.	III.	III.
Forureningsgrad	2	2	2
Max.cable size (mm²)	solid wire max.1x2.5 or 2x1.5/with sleeve max.1x2.5 (AWG 12)	solid wire max.1x2.5 or 2x1.5/with sleeve max.1x2.5 (AWG 12)	solid wire max.1x2.5 or 2x1.5/with sleeve max.1x2.5 (AWG 12)
Tilspændingsmoment	0.4 Nm	0.4 Nm	0.4 Nm
Dimensioner	90 x 18 x 64 mm	90 x 18 x 64 mm	90 x 18 x 64 mm
Vægte	S240-61g, A230-61g	S240-61g, A230-61g	S240-61g, A230-61g
Standarder	EN 61812-1, IEC60947-5-1	EN 61812-1, IEC60947-5-1	EN 61812-1, IEC60947-5-1

Dimensional drawing of the GRT6-A1 time relay in millimeters, indicating height, width, and depth. — Figure 5: Dimensions (MM)

5. Opsætning og installation

5.1 Montering

The GRT6 series relays are designed for DIN rail mounting. Ensure the relay is securely clipped onto a standard 35mm DIN rail (EN/IEC 60715). The compact 1 MODULE (18mm) width allows for efficient use of space in control panels.

5.2 Terminalforbindelser

The relays feature screw terminals for electrical connections. Ensure all connections are tight with a tightening torque of 0.4Nm. Use solid wires with a maximum size of 1x2.5 mm² or 2x1.5 mm² with sleeves (AWG 12).

Detaljeret view of GRT6-A1 and GRT6-A2 models, showing terminal connections for AC230V and AC/DC24-240V power supplies. — Figure 6: GRT6-A Terminal Configurations

Detaljeret view of GRT6-B1 and GRT6-B2 models, showing terminal connections for AC230V and AC/DC24-240V power supplies. — Figure 7: GRT6-B Terminal Configurations

5.3 Ledningsdiagrammer

Follow the specific wiring diagrams for your GRT6-A (ON Delay) or GRT6-B (OFF Delay) model. Connect the Line (L) and Neutral (N) to the appropriate supply terminals (A1-A2) and the load to the output contacts (15, 16, 18 for 1SPDT; 25, 26, 28 for 2SPDT).

Wiring diagram for GEYA GRT6-A1 (ON Delay) time relay, showing connections for Line (L), Neutral (N), and Load. — Figure 8: GRT6-A Wiring Diagram

Wiring diagram for GEYA GRT6-B1 (OFF Delay) time relay, showing connections for Line (L), Neutral (N), and Load. — Figure 9: GRT6-B Wiring Diagram

6. Betjening

6.1 Function Diagrams

The GRT6 series offers various timing functions, including simple ON Delay (A) and OFF Delay (B), as well as variations with instantaneous contacts (At, Bt). The diagrams below illustrate the timing behavior for each function.

Function diagrams for GRT6-A (Delay ON) and GRT6-B (Delay OFF) modes, including instantaneous contact variations, and instructions for time setting using potentiometers. — Figure 10: Function Diagrams and Time Setting

6.2 Tidsindstilling

Time setting is achieved using two potentiometers (knobs) on the front panel:

Knob 1 (Gear Setting): Selects the time range (e.g., 's' for seconds, 'm' for minutes, 'h' for hours, 'd' for days). It also includes 'ON' for relay open (15-18/25-28 closed) and 'OFF' for relay closed (15-18/25-28 open) for continuous operation modes.
Knob 2 (Fine Adjustment): Provides fine adjustment of the delay time, from 10% to 100% within the selected range.

Beregning Eksampdet:

To set 5 seconds: Set Knob 1 to '1-10s', and Knob 2 to 50%. Delay time = 10s * 50% = 5s.
To set 8 minutes: Set Knob 1 to '1-10min', and Knob 2 to 80%. Delay time = 10m * 80% = 8m.

6.3 LED-indikatorer

Green LED (Un): Indicates the supply voltage status.
Red LED (R): Indicates the output relay status.

7. Vedligeholdelse

The GEYA GRT6 series time relays are designed for reliable, long-term operation with minimal maintenance. However, regular checks can help ensure optimal performance:

Rensning: Keep the relay free from dust and debris. Use a soft, dry cloth for cleaning. Do not use abrasive cleaners or solvents.
Forbindelser: Periodically check all terminal connections to ensure they remain tight and secure. Loose connections can lead to intermittent operation or overheating.
Miljø: Ensure the operating environment remains within the specified temperature and humidity ranges to prevent damage to the internal components.
Visuel inspektion: Inspect the relay for any signs of physical damage, discoloration, or unusual odors, which may indicate a problem.

8. Fejlfinding

If you encounter issues with your GRT6 series time relay, consider the following common troubleshooting steps:

Ingen strømindikation (grøn LED slukket):
- Kontroller forsyningsvolumentage at terminals A1-A2.
- Sørg for, at voltage is within the specified range (AC/DC24~240V or AC230V).
- Verify power supply connections are secure.
Relay Not Activating/Deactivating (Red LED Not Changing Status):
- Confirm the time setting is correctly configured for the desired delay.
- Kontrollér lastforbindelserne, og sørg for, at lasten fungerer korrekt.
- Verify the output contact type (1SPDT or 2SPDT) matches your wiring.
- For GRT6-A (ON Delay), ensure the input signal is present for the duration of the delay.
- For GRT6-B (OFF Delay), ensure the input signal is removed to initiate the delay.
Upræcis timing:
- Re-check the potentiometer settings for both the gear and fine adjustment knobs.
- Ensure the operating temperature is within the specified range, as extreme temperatures can affect timing accuracy.
Overophedning:
- Ensure the current drawn by the load does not exceed the relay's rated current (10A/AC1).
- Verify proper ventilation around the relay.

If the problem persists after these checks, contact customer support for further assistance.

9. Brugertips

When setting the time, start with the coarse adjustment (Knob 1) to select the appropriate range, then use the fine adjustment (Knob 2) for precise timing.
Always double-check your wiring against the provided diagrams before applying power to prevent damage to the relay or connected equipment.
Consider the application's specific needs when choosing between 1SPDT and 2SPDT output contacts.

10. Garanti og support

GEYA products are manufactured to high-quality standards and are certified according to industry standards such as CE, RoHS, and WEEE. For specific warranty information, technical support, or service inquiries, please refer to the official GEYA website or contact your authorized distributor. Keep your purchase receipt for warranty claims.

GEYA company information, including establishment year, annual turnover, headquarters, and product certifications (CE, CB, SAA, ISO, UK CA, RoHS). — Figure 11: GEYA Company Information and Certifications

	GEYA GRT6-seriens enkeltfunktionstidsrelæ: Brugsanvisning og tekniske specifikationer Detaljeret brugsanvisning og tekniske specifikationer for GEYA GRT6-serien af tidsrelæer med én funktion (GRT6-A, GRT6-B). Dækker anvendelser, funktioner, ledningsdiagrammer og tekniske parametre.
	GEYA GRT8-EC Dobbeltfunktionstidsrelæ Brugsanvisning Brugsanvisning til GEYA GRT8-EC dobbeltfunktionstidsrelæet, der beskriver dets anvendelser, funktioner, tekniske specifikationer, ledningsdiagrammer og driftstilstande til industriel brug.
	GEYA GRT8-EC tidsrelæ - Tekniske specifikationer og funktioner Detaljerede tekniske specifikationer, funktioner og driftsvejledning til GEYA GRT8-EC tidsrelæet. Dette relæ er designet til industriel automatisering, styring af belysning, varmeelementer, motorer og ventilatorer, og tilbyder justerbare forsinkelsestider og DIN-skinnemontering.
	GEYA GRT8-M multifunktions tidsrelæ - brugsanvisning Omfattende instruktionsmanual til GEYA GRT8-M multifunktions-tidsrelæet, med detaljerede oplysninger om dets anvendelser, tekniske specifikationer, funktioner, ledningsføring og installation.
	GEYA GRT8-2T Double Delay Relay - Instruction Manual Detailed instruction manual for the GEYA GRT8-2T Double Delay Relay, covering applications, function features, technical specifications, panel and wiring diagrams, and setting instructions for industrial use.
	GEYA GRT8-A & B enkeltfunktionstidsrelæ instruktionsmanual Omfattende instruktionsmanual til GEYA GRT8-A & B-seriens enkeltfunktions-tidsrelæer. Dækker anvendelser, funktioner, detaljerede tekniske specifikationer, modelbetydninger, panel- og ledningsdiagrammer, funktionstiming, tidsindstillingsprocedurer og fysiske dimensioner.

GEYA GRT6-A/B ON/OFF DELAY TIME RELAY

GEYA GRT6-A/B Series Electronic Delay Time Relay