ThinkRider XXPRO Direct Drive Smart Bike Trainer Brugsanvisning

1. Produktintroduktion

Tak for købetasing the ThinkRider XX PRO Smart Bike Trainer. Please read this instruction manual carefully before use to ensure proper setup and operation.

2. Pakkens indhold

Kontroller venligst, at alle nedenstående varer er inkluderet i din pakke. Hvis der mangler eller er beskadigede varer, bedes du kontakte kundesupport.

• ThinkRider XX PRO Smart Bike Trainer
• Strømadapter
• 8-9-10 Speed Flywheel Washer
• Quick Release Adapters (Support 130/135mm)
• Thru Axle Adapters (Support 142/148mm)
• Basisskruer (x5)
• 17 mm skruenøgle
• Cassette Adjustment Spacers (x4)
• Hexnøgle
• Oil Disc Caliper Plug
• Barrel Shaft Non-Drive Side Converter
• Barrel Shaft Drive Side Converter
• Quick Remove Drive Side Special Pull
• Quickly Remove Non-Drive Side Converter
• Brugermanual (specifikation)

Særlig bemærkning: The cassette, thru axle release, quick release, BLE, and ANT+ USB receiver are not included as standard accessories and must be purchased separately from your dealer if needed.

3. Tekniske specifikationer

4. Opsætning og installation

4.1 Installation af træner

1. Place the trainer on a level surface, ensuring there are no obstacles or dangerous objects around.
2. Installer basen og stram skruerne for at sikre, at træneren er stabil.
3. Connect the trainer to a standard 110V-220V power outlet with the original power adapter.
4. The trainer comes with a standard freehub body, compatible with Shimano HG 8-12-speed cassettes, as well as SRAM 8-11-speed road and mountain bike cassettes.
   • Note: 11-speed standard cassettes can be installed directly. 8-10-speed cassettes require a spacer; please consult customer service for details.
   • Campagnolo or SRAM XDR freehub bodies must be purchased separately.

4.2 Adapters Installation

MEDDELELSE: The non-drive side adapter can be inserted in different directions to suit different sizes of axle spacing. Refer to the diagrams below.

130-135 Quick Release Adapter Installation

• Short end exposed: Adaptive for 130mm quick release. Suitable for 130mm spacing.
• Long end exposed: Adaptive for 135mm quick release. Suitable for 135mm spacing.
• Don't forget to install the quick release adapter.

142-148 Thru Axle Adapter Installation

• Short end exposed: Adaptive for 142mm thru axle. Suitable for 142mm spacing.
• Long end exposed: Adaptive for 148mm thru axle. Suitable for 148mm spacing.
• Don't forget to install the thru axle adapter.

5. Betjeningsvejledning

5.1 Smart Interaction and Connectivity

The ThinkRider XXPRO features built-in ANT+ FE-C and BLE FTMS wireless communication protocols, allowing it to connect with popular cycling applications and bike computers.

After downloading and installing cycling software on your mobile phone or computer, switch on the trainer. Open the software, find the device connection interface, and search for the "cycling trainer" signal to connect.

5.2 Enhanced Unplugged Riding

The XXPRO features improved self-power generation efficiency, providing an authentic riding experience even when unplugged. This means you can train without needing a constant power source.

5.3 Accurate Power Data

The trainer provides accurate power output data with a ±1% accuracy, ensuring true and reliable riding power metrics for your training analysis.

5.4 Virtual Shifting (Optional Accessory)

The VS200 Virtual Shifting Kit is available as an optional accessory. Configure it using ThinkRider Tools before first use to unlock smooth shifting and an enhanced riding experience. Once configured, the controller can connect directly to the smart trainer without additional software.

5.5 Firmwareopgradering

The cycling trainer's firmware can be upgraded. For firmware updates, download the "ThinkRider Tools" app on your mobile phone.

Særlig bemærkning: During the upgrade, keep your phone within 1 meter of the cycling trainer. Do not exit the upgrading interface, perform any other operations, or turn off the power of the cycling trainer until the firmware upgrade is complete.

A video guide for installation and firmware updates is available here: https://youtu.be/5TqY8dbD5YE

6. Vedligeholdelse

• Keep the trainer clean and free from dust and debris. Wipe down the unit with a soft, dry cloth after each use.
• Kontrollér regelmæssigt alle skruer og forbindelser for at sikre, at de er stramme og sikre.
• Inspect the quick-release lever or thru-axle mechanism before each use to ensure it is securely locked.
• Avoid exposing the trainer to excessive moisture or direct water contact. Water ingress can cause equipment failure.
• Do not apply lubricants or cleaning agents to the freewheel or internal components unless specifically instructed by the manufacturer.
• Opbevar træningsudstyret et tørt, køligt sted væk fra direkte sollys og ekstreme temperaturer.

7. Fejlfinding

Forbindelsesproblemer

• Trainer cannot connect to cycling app and bike computer simultaneously: Træneren kan ikke oprette forbindelse til en cykelapp og en cykelcomputer på samme tid, da dette kan forårsage dataoutput og dermed funktionsfejl.
• Smart trainer not found by the app: Hvis din smart trainer ikke kan findes af appen, kan det skyldes:
  • The same smart trainer cannot be connected to two apps simultaneously.
  • If the smart trainer is already connected to an app (a solid red light indicates it is connected), the next app will not be able to find the smart trainer.
  • Løsning: First, check and disconnect any previous connection (or unplug and restart the trainer; a flashing red light indicates a waiting connection state), and then proceed with the next app connection.

8. Brugertips

No specific user tips are available at this time. For optimal performance, ensure your trainer is always updated to the latest firmware and connected to compatible cycling software.

9. Garanti og support

9.1 Garantioplysninger

• Produktet er garanteret i et år fra købsdatoen.
• If the product fails during the warranty period due to an original device quality problem or assembly process, the company will provide free maintenance and spare parts replacement.
• Please use the original packing materials when shipping the product for service.

9.2 Undtagelser fra garanti

Product damage or malfunction caused by the following reasons is not covered by the warranty:

1. Damage caused by use or installation not in accordance with the instructions.
2. Produktskade forårsaget af menneskelige faktorer eller ulykke.
3. Unauthorized disassembly of the product without contacting the company or dealer for confirmation.
4. Ingress of water causing equipment failure.
5. Ældning og ridser forårsaget af normal brug.

* After the expiration of the warranty period, the company will continue to provide maintenance services, but corresponding maintenance costs will be charged.

9.3 Kundesupport

If you have any after-sales questions, please contact our engineers at: service2@thinkrider.com

10. Safety Warnings and Caveats

• Always install and use the trainer on a flat and sturdy surface.
• Før hver brug skal du omhyggeligt kontrollere, at dit hurtigudløsergreb eller din gennemgående aksel er sikkert fastgjort til stellet for at forhindre, at akslen løsner sig under brug, hvilket kan forårsage personskade og materielle skader.
• Rør ikke ved trænerens bevægelige dele med hænderne eller andre genstande.
• After long-term use, the trainer's freewheel may become hot; do not touch it.
• Hold børn og kæledyr væk fra træneren under cykling.
• Rør ikke ved frihjulet, og skil ikke cyklen ad, mens inertisvinghjulet stadig drejer.
• Hold træneren væk fra ild, vand og andre forhindringer under brug.
• Stå ikke på træneren, mens du træder i pedalerne; undgå overdreven gyngning; vær opmærksom på sikkerheden.
• Brugere med hjerte-kar- og cerebrovaskulære sygdomme eller andre tilstande, der er uegnede til højintensiv træning, er strengt forbudt at bruge træneren.
• Rådfør dig med en læge, før du starter eller ændrer en træningsplan.
• Personer, der ikke er i stand til at udvise ansvarlig adfærd, bør ikke bruge træneren.

Ansvarsfraskrivelse: The manufacturer is not responsible for personal and property damage caused by abnormal use of the trainer.