1. Introduktion
The GT SONIC ST36 Industrial Ultrasonic Cleaner is a high-performance cleaning device designed for a wide range of applications, from industrial and mining enterprises to laboratories and personal use. Utilizing ultrasonic technology, it provides efficient and consistent cleaning for various items, including electronic components, mechanical hardware, jewelry, eyeglasses, and auto parts. This manual provides essential information for the safe and effective operation and maintenance of your ultrasonic cleaner.
2. Sikkerhedsforanstaltninger
Please read and understand all safety instructions before operating the unit. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Sørg altid for, at enheden er korrekt jordforbundet.
- Do not operate the unit with an empty tank. Always fill the tank with cleaning solution before turning on the ultrasonic or heating functions.
- Nedsænk ikke hovedenheden i vand eller andre væsker.
- Hold enheden væk fra børn.
- Use appropriate cleaning solutions for the items being cleaned. Avoid flammable or corrosive solutions.
- Tag stikket ud af stikkontakten, før du rengør eller udfører vedligeholdelse.
- Do not touch the tank or solution when the heating function is active, as it can be hot.
3. Produktfunktioner
The GT SONIC ST36 Industrial Ultrasonic Cleaner is built with quality and performance in mind:
- Materiale: Constructed from durable stainless steel (SUS304) for the tank, housing, basket, and lid, featuring diamond-shaped figures for enhanced aesthetics and durability.
- Transducere: Equipped with high-performance transducers for powerful and efficient ultrasonic cleaning.
- Kontrolsystem: Features a secure and stable PCBA (Printed Circuit Board Assembly) for reliable operation.
- Certificeringer: CE/FCC tested and approved, ensuring compliance with safety and quality standards.
- Sweep Frequency: Incorporates a new sweep frequency capability for optimal cleaning results.
4. Opsætning
Follow these steps for initial setup of your ultrasonic cleaner:
- Udpakning: Carefully remove the ultrasonic cleaner and all accessories from the packaging. Retain packaging for future transport or storage.
- Placering: Place the unit on a stable, level, and heat-resistant surface. Ensure there is adequate ventilation around the unit.
- Strømtilslutning: Connect the power cord to a grounded electrical outlet matching the specified voltage (AC110V-120V 60Hz or AC220V-240V 50Hz).
- Fyld tank: Open the lid and fill the stainless steel tank with an appropriate cleaning solution. Ensure the liquid level is between the MIN and MAX marks, covering the items to be cleaned but not overflowing.
- Install Basket (Optional): If using the cleaning basket, place it inside the tank.
5. Betjeningsvejledning
Operating the GT SONIC ST36 is straightforward:
- Forbered varer: Place the items to be cleaned into the cleaning basket. Avoid overcrowding the basket to ensure optimal cleaning.
- Placer kurv: Carefully lower the basket with items into the cleaning tank. Ensure items are fully submerged.
- Indstil temperatur (valgfrit): If heating is desired, turn the 'HEATER' knob to set the desired temperature (20-80℃). Allow time for the solution to reach the set temperature.
- Indstil rengøringstid: Turn the 'TIMER' knob to select the desired cleaning duration. Cleaning times vary depending on the items and level of contamination.
- Start ultralydsrensning: Turn the 'SONIC' knob to activate the ultrasonic cleaning function. The unit will begin generating ultrasonic waves.
- Overvåg proces: Observe the cleaning process. For heavily soiled items, multiple cycles or a change of solution may be necessary.
- Slutcyklus: Once the cleaning cycle is complete, the unit will automatically stop the ultrasonic function. Turn off the heater if it was used.
- Fjern elementer: Carefully lift the basket out of the tank. Rinse the cleaned items with clean water and dry them thoroughly.
6. Vedligeholdelse og pleje
Proper maintenance ensures the longevity and optimal performance of your ultrasonic cleaner.
- Tømning af tanken: After each use or when the solution becomes dirty, drain the tank. Locate the drain valve on the side of the unit, open it to empty the solution into a suitable container, then close it securely.
- Rengøring af tanken: Wipe the inside of the tank with a soft cloth and mild detergent. Rinse thoroughly with clean water. Do not use abrasive cleaners or scourers.
- Udvendig rengøring: Rengør enhedens yderside med annonceamp klud. Undgå at vand kommer i kontakt med kontrolpanelet eller de elektriske komponenter.
- Opbevaring: When not in use, ensure the tank is empty and dry. Store the unit in a cool, dry place.
- Solution Disposal: Dispose of used cleaning solutions according to local environmental regulations.
7. Fejlfinding
If you encounter issues with your ultrasonic cleaner, refer to the following common problems and solutions:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Enheden tænder ikke | No power supply; Power cord not connected; Faulty outlet | Kontroller netledningens tilslutning; Prøv en anden stikkontakt; Sørg for, at tænd/sluk-knappen er tændt. |
| Ultralydsfunktionen virker ikke | Tank empty; Timer not set; 'SONIC' knob not activated | Fill tank with solution; Set timer; Turn 'SONIC' knob to desired setting. |
| Varmefunktionen virker ikke | 'HEATER' knob not set; Insufficient time for heating | Set 'HEATER' knob to desired temperature; Allow sufficient time for solution to heat up. |
| Dårlige rengøringsresultater | Incorrect cleaning solution; Insufficient cleaning time; Overcrowded tank; Solution too cold | Use appropriate solution; Increase cleaning time; Clean fewer items per batch; Increase solution temperature. |
| Overdreven støj eller vibrationer | Unit not on a stable surface; Tank empty or underfilled | Place on a stable surface; Ensure tank is filled to appropriate level. |
Hvis problemet fortsætter efter at have prøvet disse løsninger, bedes du kontakte kundesupport.
8. Specifikationer
| Feature | Specifikation |
|---|---|
| Model | ST36 |
| Tank materiale | Rustfrit stål SUS304 |
| Tank Size (L*W*H) | 510 x 300 x 250 mm |
| Enhedsstørrelse (L*B*H) | 570 x 360 x 450 mm |
| Bind | 36 liter |
| Ultralydsfrekvens | 28 KHz |
| Ultralydseffekt | 600 W |
| Varmekraft | 800 W |
| Opvarmningstemperaturområde | 20-80 ℃ |
| Strømforsyning | AC110V-120V 60Hz; AC220V-240V 50Hz |
| Vægt | 30 kg |
| Gældende industrier | Manufacturing Plant, Machinery Repair Shops, Printing Shops |
| Rengøringsproces | Cold Water Cleaning |
| Rengøringstype | Degreaser, Degreasing |
| Material (to be cleaned) | Metal / Coil |
| Kernekomponenter | Transducer |
9. Brugertips
Maximize your cleaning efficiency with these helpful tips:
- For optimal results, pre-rinse heavily soiled items to remove loose debris before ultrasonic cleaning.
- Use a specialized ultrasonic cleaning solution appropriate for the material and type of contamination. Water alone may not be sufficient for grease or stubborn dirt.
- Consider using a higher temperature (within the recommended range) for better degreasing and cleaning performance, especially for oils and greases.
- Always use the cleaning basket to keep items suspended in the solution and prevent them from resting directly on the tank bottom, which can reduce ultrasonic effectiveness.
- After cleaning, thoroughly rinse items to remove any residual cleaning solution and dry them immediately to prevent water spots or corrosion.
10. Garanti og support
The GT SONIC ST36 Industrial Ultrasonic Cleaner comes with a 1-year warranty covering the machine and its core components, including the transducer. This warranty covers manufacturing defects and malfunctions under normal use.
For technical support, warranty claims, or service inquiries, please contact your authorized GT SONIC dealer or the seller directly. Please have your product model and purchase information ready when contacting support.
