1. Introduktion
Thank you for choosing the Xiaomi Mijia Brushless Electric Drill 2. This multi-functional smart home power tool is designed for efficient drilling and screwing tasks around your home. Featuring a high-performance brushless motor, a large capacity battery, and versatile operating modes, it provides a powerful yet user-friendly experience. Please read this manual carefully before use to ensure safe and optimal operation.
Figure 1: Xiaomi Mijia Brushless Electric Drill 2 and its EVA storage case.
2. Generelle sikkerhedsretningslinjer
- Always wear appropriate personal protective equipment, such as safety glasses, gloves, and hearing protection, when operating the drill.
- Hold arbejdsområdet rent og godt oplyst. Rodede eller mørke områder inviterer til ulykker.
- Brug ikke elværktøj i eksplosive atmosfærer, såsom i nærheden af brændbare væsker, gasser eller støv.
- Hold børn og omkringstående væk, mens du betjener et elværktøj. Distraktioner kan få dig til at miste kontrollen.
- Ensure the drill bit or screwdriver bit is securely fastened in the chuck before operation.
- Undgå utilsigtet start. Sørg for, at kontakten er i slukket position, før du tilslutter batteriet, løfter eller bærer værktøjet.
- Gå ikke for langt. Hold altid ordentligt fodfæste og balance. Dette giver bedre kontrol over elværktøjet i uventede situationer.
- Frakobl batteripakken fra elværktøjet, før du foretager justeringer, skifter tilbehør eller opbevarer elværktøj.
- Brug det korrekte værktøj til din opgave. Brug ikke for meget kraft.
3. Pakkens indhold
Markér venligst feltet for følgende elementer:
- Elektrisk boremaskine x 1
- Bor x 5
- Borehovedhylster x 1
- Bit x 10
- Forlængerstang x 1
- Opbevaringspose x 1
- Brugervejledning x 1
Figure 2: The complete kit, including the drill, various bits, and storage case.
4. Produktet er slutview
The Xiaomi Mijia Brushless Electric Drill 2 is designed for versatility and ease of use. Key components and features include:
- Børsteløs motor: Provides powerful, efficient, and labor-saving operation with sensitive and fast response.
- 1900mAh litium-ion-batteri: Offers long battery life, capable of screwing approximately 600 screws or drilling about 200 holes on a full charge.
- Multi-mode switch: Easily switch between different modes to meet various drilling and screwing needs.
- 32-gearjustering: Precise control over drilling and screwing strength. Gears 1-20 are for screwing/unscrewing, and gears 21-32 are for fine drilling.
- Intelligent 'A'-gear: Automatically matches the proper torque, preventing over-tightening and damage to screws, ideal for new users.
- Ratchet Self-locking Chuck: Ensures tight occlusion and firm clamping of bits and drill bits, preventing shaking during operation.
- LED lys: Illuminates the work area, useful for dark or confined spaces.
- Bak/lås-knap: For changing rotation direction and locking the trigger.
- Skridsikkert og plastbelagt håndtag: Giver et komfortabelt og sikkert greb.
- Type-C opladningsport: Praktisk og universel opladningsgrænseflade.
Figure 3: Key features and components of the drill.
Figure 4: Control panel with mode and speed settings.
5. Opsætning
5.1 Opladning af batteriet
Before first use, fully charge the drill's battery. Connect the Type-C charging cable to the charging port on the drill and to a compatible power adapter (5V=2A, 9V=2A, or 12V=2A). A full charge takes approximately 2 hours. The battery indicator on the control panel will show charging status.
5.2 Montering/udskiftning af bits
- Ensure the drill is turned off and the trigger is locked (if applicable).
- Twist the self-locking chuck counter-clockwise to open the jaws.
- Insert the desired drill bit or screwdriver bit into the chuck. Ensure it is inserted as far as possible for a secure grip.
- Twist the chuck clockwise to tighten the jaws firmly around the bit. You should hear a 'click' sound indicating it's securely locked.
- For screwdriver bits, you may use the magnetic extension rod for added reach.
Figure 5: Self-locking chuck for secure bit installation.
6. Betjening
6.1 Valg af driftstilstand
The drill features multiple operating modes, selectable via the control panel:
- Højhastighedstilstand: For faster drilling, up to 1700 rpm.
- Lavhastighedstilstand: For more controlled drilling or screwing, up to 400 rpm.
- Manuel tilstand (M): Allows manual adjustment of torque and speed using the 32 gears.
- Automatisk tilstand (A): The intelligent chip automatically adjusts torque to prevent over-tightening, ideal for general screwing tasks.
6.2 Justering af moment og hastighed
Use the '+' and '-' buttons on the control panel to adjust the gear setting. There are 32 gears available:
- Gear 1-20: Recommended for screwing and unscrewing tasks.
- Gear 21-32: Recommended for fine drilling tasks.
6.3 Boring og skruning
- Select the appropriate bit and mode for your task.
- Position the drill firmly against the workpiece.
- Tryk på aftrækkeren for at starte boremaskinen. Tryk konstant og jævnt.
- To reverse the rotation (e.g., for unscrewing), use the Reverse/Lock button.
Video 1: Demonstration of the drill's features and usage.
6.4 Recommended Bits and Materials
- 8mm Alloy Overlord Drill: Suitable for wood, plastic, thin metal, and lightweight concrete.
- 6mm Multi-functional Ceramic Drill: Suitable for ceramic tiles, red bricks, and plastics.
- 4/6/8mm Woodworking Drills: Specifically designed for woodworking applications.
Figure 6: Included drill bits and screwdriver bits.
6.5 Wet Drilling
For materials like ceramic tile, marble, and concrete, wet drilling is often recommended to prevent overheating and extend the drill bit's lifespan. When wet drilling:
- Ensure water injection is applied before and during drilling to cool the bit.
- Use the low speed mode.
- Apply force uniformly to avoid the bit from being stuck or broken.
Figur 7: Eksamples of materials suitable for wet and dry drilling.
7. Vedligeholdelse
7.1 Rengøring
- Always disconnect the drill from any power source and remove the bit before cleaning.
- Tør værktøjet af med en blød,amp klæde. Brug ikke skrappe kemikalier eller slibende rengøringsmidler.
- Hold ventilationsåbningerne fri for støv og snavs for at forhindre overophedning.
7.2 Opbevaring
- Store the drill and its accessories in the provided EVA storage bag.
- Opbevares tørt, væk fra direkte sollys og ekstreme temperaturer.
- Opbevares utilgængeligt for børn.
Figure 8: Customized EVA storage bag for organized storage.
8. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Boremaskinen starter ikke | Batteriet er lavt eller afladet Aftrækkerlås aktiveret | Oplad batteriet Deaktiver aftrækkerlåsen |
| Bit is loose or falls out | Spændepatronen er ikke spændt ordentligt | Ensure the chuck is twisted clockwise until it clicks securely |
| Reduceret effekt eller hastighed | Lavt batteri Incorrect mode/gear selection | Genoplad batteriet Adjust to a higher gear or appropriate mode |
| Overophedning under brug | Langvarig kraftig brug Blokerede ventilationsåbninger | Lad værktøjet køle af Rengør ventilationsåbningerne |
9. Specifikationer
| Feature | Detalje |
|---|---|
| Produktnavn | Mijia børsteløs elektrisk boremaskine 2 |
| Modelnummer | MJWSDZ002QW |
| Dimensioner | Ca. 166 x 55 x 205 mm |
| Maks. Moment | 50N·m |
| Hastighed uden belastning | 0-1700 rpm (High Speed) 0-400 rpm (Low Speed) |
| Nominel voltage | 14.4V |
| Opladningsindgang | 5V=2A; 9V=2A; 12V=2A |
| Opladningsgrænseflade | Type-C |
| Nominel kapacitet | 1900mAh |
| Batteritype | Lithium-ion batteripakke |
| Opladningstid | Ca. 2 timer |
| Nettovægt | Approx. 990g (including 8mm Overlord drill bit) |
| Arbejdstemperatur | -10°C til 45°C |
| Opladningstemperatur | 5°C til 40°C |
| Opbevaringstemperatur | -10°C til 45°C |
| Maks. Clamping Diameter | .10mmXNUMX mm |
| Motortype | Børsteløs |
| Bruge | Hjem DIY |
Figur 9: Produktmål.
10. Brugertips
- For delicate tasks or when working with new materials, start with a lower gear setting and gradually increase if needed.
- Utilize the 'A' (Automatic) mode for general screwing to prevent overtightening and damage to fasteners or surfaces.
- Always ensure the battery is sufficiently charged before starting a project to avoid interruptions.
- When drilling into hard materials, apply consistent pressure and allow the drill to do the work; avoid forcing it.
11. Garanti og support
For garantioplysninger, teknisk support eller serviceforespørgsler henvises til den officielle Xiaomi Mijia-side. webwebstedet eller kontakt din lokale autoriserede forhandler. Gem din købskvittering som købsbevis i tilfælde af garantikrav.
